My Homemade Twin Exhaust mod with lighted third clearomiser

[thetrucker]

Hi Fellow Vapers,

I have made another mod this time using the box my Gladius came in.

I wanted to try using 2 clearomisers each with 2 coils inside for a total of 4 coils altogether and connect them via

heat shrink tubes to a third clearomiser. I thought it would be fun to include an LED inside of the third clearomiser

the one I call "The Collector"

I had to ream out the drip tips a little with my drumel to alow for the heat shrink tubes to slide down inside.

left tip is clear ( you can see heat shrink tube shoved down inside) and other tip is white.

I used a square "Soft Touch" switch from Radio Shack 4 my fire button which sits on top next 2 the illuminated collector

I made a 510 connector out of a machine screw for the left clearo and then tried something different

for the right clearo I soldiered a small wire into the tiny tube in the base.

I used a mini protank that had stripped threads and would not seal for the top clearo--My Collector.

Last photo is the back of my project box showing the label insert I left inside for looks

 

[tehdarkaura]

Hi Fellow Vapers,

I have made another mod this time using the box my Gladius came in.

I wanted to try using 2 clearomisers each with 2 coils inside for a total of 4 coils altogether and connect them via

heat shrink tubes to a third clearomiser. I thought it would be fun to include an LED inside of the third clearomiser

the one I call "The Collector"

I had to ream out the drip tips a little with my drumel to alow for the heat shrink tubes to slide down inside.

left tip is clear ( you can see heat shrink tube shoved down inside) and other tip is white.

I used a square "Soft Touch" switch from Radio Shack 4 my fire button which sits on top next 2 the illuminated collector

I made a 510 connector out of a machine screw for the left clearo and then tried something different

for the right clearo I soldiered a small wire into the tiny tube in the base.

I used a mini protank that had stripped threads and would not seal for the top clearo--My Collector.

Last photo is the back of my project box showing the label insert I left inside for looks

Cool idea thetrucker -- so how does the thing hit? I bet it can be a bit tricky to refill -- but the dual atty idea is a cool one -- maybe even lets you do some flavor mixing experimentation without committing

 

[Visus]

really cool ideasman mechanism but heatshrink tubing gotta be absolutely the nastiest rubber you can find. may be wrong but with it being able to shrink they use some nasty cellulose stuff I betcha. Be cautious with play with vaping that one..

Here's it's big brothers

 

[thetrucker]

Hi and thx for the replies this hits pretty good and the rubber heatshrink just slides down inside and so far no bad taste.

 

[BobC]

I need ta see a vid on you filling this

 

[thetrucker]

My movie called ---"Going Crazy Trying To Fill Double Clearomizers With No Room"----will be coming out soon at a theatre near you----hhahahahahahahah

I have not refilled the clearos yet but will use tweezers to slide the heatshrink out of the driptips and then pull the clearomizer base out just far enough

to fill without disturbing the wiring.

Not really handy set up at all but mostly built for deomonstration and fun.

 

[thetrucker]

Thanks for the pic on the Chain Smoker Mod

This is really cool with the double mouth piece.

Great vapor possibilities with this one and lots of looks from fellow vapers.

Website says 59.00 Dollars--not bad for twice the fun--hahahah

 

[Zanderist]

I like how the mouth piece has an LED within it. At least from what I can gather from the picture.

 

[thetrucker]

Thanks Yes I put an led in the mouth piece but only had one left in tool box and it was not very bright and so will have to stock up on leds when I get

the chance to visit Radio Shack again.