Here's the part list for my order from Digi-Key...
1 - 811-2179-ND CONV DC/DC 6A 12VIN POL SIP - Switching Converter
2 - 478-1839-ND CAP TANT 10UF 16V 10% RADIAL - Capacitors
4 - MAGNET 1/4"DIA X 1/16"THICK - Box Magents
5 - CF18JT220RCT-ND RES 220 OHM 1/8W 5% CF AXIAL -220 Ohm Resistors
5 - CF18JT10K0CT-ND RES 10K OHM 1/8W 5% CF AXIAL - 10KOhm Resistors
1 - 450-1571-ND SWITCH SLIDE 3POS 0.177"BLCK T/H - 3 Pos. Switch
1 - GH1358-ND SWITCH PUSH SPST-NO 5A 120V - Push Button Switch
2 - BK-595-ND CONTACT BATTERY AA POSITIVE - BATTERY CONTACT - DIMPLE
2 - BK-628-ND CONTACT BATTERY AA NEGATIVE BATTERY CONTACT - SPRING
1 - 3352P-201LF-ND POT 200 OHM THUMBWHEEL CERM ST - Potentiometer
Subtotal
$19.22
In addition, the Radio Shack box was about $2.69
One battery connector (I'm an 808 fellow)
And I found the displays available for $2.89(?)/each Shipped on eBay.
...and of course 18350 batteries.
I did not install the main power switch that mamu has used. That may be a questionable decision.
It will be a little tricky to get the display installed as everything else is put together and in the way. I can do a little taking apart if needed to get it in.
1 - 811-2179-ND CONV DC/DC 6A 12VIN POL SIP - Switching Converter
2 - 478-1839-ND CAP TANT 10UF 16V 10% RADIAL - Capacitors
4 - MAGNET 1/4"DIA X 1/16"THICK - Box Magents
5 - CF18JT220RCT-ND RES 220 OHM 1/8W 5% CF AXIAL -220 Ohm Resistors
5 - CF18JT10K0CT-ND RES 10K OHM 1/8W 5% CF AXIAL - 10KOhm Resistors
1 - 450-1571-ND SWITCH SLIDE 3POS 0.177"BLCK T/H - 3 Pos. Switch
1 - GH1358-ND SWITCH PUSH SPST-NO 5A 120V - Push Button Switch
2 - BK-595-ND CONTACT BATTERY AA POSITIVE - BATTERY CONTACT - DIMPLE
2 - BK-628-ND CONTACT BATTERY AA NEGATIVE BATTERY CONTACT - SPRING
1 - 3352P-201LF-ND POT 200 OHM THUMBWHEEL CERM ST - Potentiometer
Subtotal
$19.22
In addition, the Radio Shack box was about $2.69
One battery connector (I'm an 808 fellow)
And I found the displays available for $2.89(?)/each Shipped on eBay.
...and of course 18350 batteries.
I did not install the main power switch that mamu has used. That may be a questionable decision.
It will be a little tricky to get the display installed as everything else is put together and in the way. I can do a little taking apart if needed to get it in.