Hello, people!
My build is with one coil:
SS316L, 28ga, 2.5mm, 7 wraps, 0.64ohm, 12w, spaced, on Bishop rta.
The problem is that the coil heats from one side first!
This is at the beginning, then, after a moment, as it should - from inside out.
This happens when the coil is cold. When it has been fired recently it is ok.
And it causes the cotton soon to gets burnt and dark more from the problem side that glows first.
I checked the posts and they are tight well enough.
I also fully disassembled the deck of the tank and cleaned every part.
And, finally, I changed the coil but all without any success.
I looked through the net for an answer, but nothing came out.
I would appreciate your help and ideas!
Best wishes and clouds!
My build is with one coil:
SS316L, 28ga, 2.5mm, 7 wraps, 0.64ohm, 12w, spaced, on Bishop rta.
The problem is that the coil heats from one side first!
This is at the beginning, then, after a moment, as it should - from inside out.
This happens when the coil is cold. When it has been fired recently it is ok.
And it causes the cotton soon to gets burnt and dark more from the problem side that glows first.
I checked the posts and they are tight well enough.
I also fully disassembled the deck of the tank and cleaned every part.
And, finally, I changed the coil but all without any success.
I looked through the net for an answer, but nothing came out.
I would appreciate your help and ideas!
Best wishes and clouds!