Hi folks - thought I'd post a little 'progress' I made lately using some 'clear EVOD tanks' from Vice's E-cigs online store...
I had an issue of them slightly leaking while being stored in a cigar box near my chair in our 5th wheel...
so I had some barely old T32 tanks I had bought off Fast Tech (the plastic cracked soon upon use and then leaked through the cracks - ie, don't bother buying that style!!) -
so, I removed the 'flat' silicon ring from the top of the base of the T32 clearomizers/tanks and washed them up and let them dry...
Then on my clear evods, I took the base off the tank, removed the atty head, and then removed the round silicon ring at the bottom of the base, then put on the flat silicon ring standing up (ie, not laying flat against the bottom of the groove at the base), then added the round silicon ring next to it.
I left the upper flat silicon ring in it's groove. I filled or refilled the tank, added back the atomizer head to the base and screwed the base to the tank top and tried them out - no difference in the vaping, but I've certainly seen a difference in the leaks over the last couple days in my box!!!! So, it worked!!! YEAH!! haha
Note: I had tried 2 round silicon rings - those were too fat for the groove; also tried a flat ring next to a round ring (didn't take off the round ring 1st, just added the flat ring next to it) and didn't like that set up - the flat ring stuck up higher than the round ring did...
and found my 3rd try of removing the round ring at the bottom, putting on the flat one 1st, then the round one - worked best!
So for all you evod lovers that have bought cheap ones from Fast Tech, or those of you who've found the clear evods on Vice's e-cig store, try this and I think you'll be quite happy with the results (for cheap!)...
Now, I have 10 more to do, so anyone who knows where to purchase about a dozen of these flat silicon washers, please let me know!!
NancyB