Stealth Vaping in 2023

[OnTheFidele]

Hey all, been vaping for 11 years but haven't really been keeping up with the industry for the past 5 years. Looks like the market's changed a lot since then.

1. Is there any such thing as a rebuildable draw-fire MTL pod mod with adjustable air flow (I'm usually at 1mm round air holes in my devices)? I ask because I was pleasantly surprised at how good a stealth vape an unflavored ("Clear") disposable was. Combined with a chest pack, I found it possible to stealth vape in daylight as long as I got my angles down, lol. It would be nice to have a future-proof rebuildable version in that tiny form factor...

2. Tube Mods: Does anyone even make 16-19mm devices anymore? I can see that they make DVARW 16s, Kayfun Mini v3s, and Aspire recently launched the Nautilus Nano. But can't really find any quality tube mods that would match. Maybe my tastes are old school...

3. SBS Mods: Or something like the BF16 but way more space-efficient?

Probably lots of stuff I've missed in my research, so:

TL,DR: What are your favorite stealth vapes for MTL?

Thank you to anyone who responds

 

[Mordacai]

Someone on the forum a while back did mention a cheap refillable pod mod with draw activation, but for the life of me I can't remember what it was called.

As for tube mods, only Dicodes come to mind.

And not a clue when it comes to SBS mods.

 

[OnTheFidele]

Someone on the forum a while back did mention a cheap refillable pod mod with draw activation, but for the life of me I can't remember what it was called.

As for tube mods, only Dicodes come to mind.

And not a clue when it comes to SBS mods.

Thanks. I figure I'm reaching. The market's definitely changed...

 

[borno]

I've got some rpm rba coils, so I use a few of the smok pod mods. The fetch mini is really small and I wish I could find a spare. It's not a whole lot bigger than a box of matches.

 

[MLEJ]

Is there any such thing as a rebuildable draw-fire MTL pod mod with adjustable air flow

Sorry i'm late to the party but...
Voopoo's Vinci 3 is a draw-fire pod mod w/ adjustable airflow. It uses PnP coils and will take the PnP or compatible RBA. Using the right coil or build + air flow, you should be able to get MTL w/ it. i've no direct experience w/ this, though.

 

[OnTheFidele]

Sorry i'm late to the party but...
Voopoo's Vinci 3 is a draw-fire pod mod w/ adjustable airflow. It uses PnP coils and will take the PnP or compatible RBA. Using the right coil or build + air flow, you should be able to get MTL w/ it. i've no direct experience w/ this, though.

Thank you, I'll look into it!

 

[Mediocre00Rebel]

Hey all, been vaping for 11 years but haven't really been keeping up with the industry for the past 5 years. Looks like the market's changed a lot since then.

1. Is there any such thing as a rebuildable draw-fire MTL pod mod with adjustable air flow (I'm usually at 1mm round air holes in my devices)? I ask because I was pleasantly surprised at how good a stealth vape an unflavored ("Clear") disposable was. Combined with a chest pack, I found it possible to stealth vape in daylight as long as I got my angles down, lol. It would be nice to have a future-proof rebuildable version in that tiny form factor...

2. Tube Mods: Does anyone even make 16-19mm devices anymore? I can see that they make DVARW 16s, Kayfun Mini v3s, and Aspire recently launched the Nautilus Nano. But can't really find any quality tube mods that would match. Maybe my tastes are old school...

3. SBS Mods: Or something like the BF16 but way more space-efficient?

Probably lots of stuff I've missed in my research, so:

TL,DR: What are your favorite stealth vapes for MTL?

Thank you to anyone who responds

There is a rebuildable mtl rta. I had one. Well, I have one. I actually don't have any idea where it is right now.... I didn't like it. It just didn't have the same flavor as the sub ohm. I wish I could tell you the name, but I don't remember.

 

[Mediocre00Rebel]

There is a rebuildable mtl rta. I had one. Well, I have one. I actually don't have any idea where it is right now.... I didn't like it. It just didn't have the same flavor as the sub ohm. I wish I could tell you the name, but I don't remember.

It was this one. Wotofo COG MTL RTA - World's First Atomizer with Gear Mechanism

Mb, I didn't read. This is not a pod.

 

[ShowMeTwice]

Hey all, been vaping for 11 years but haven't really been keeping up with the industry for the past 5 years. Looks like the market's changed a lot since then.

1. Is there any such thing as a rebuildable draw-fire MTL pod mod with adjustable air flow (I'm usually at 1mm round air holes in my devices)? I ask because I was pleasantly surprised at how good a stealth vape an unflavored ("Clear") disposable was. Combined with a chest pack, I found it possible to stealth vape in daylight as long as I got my angles down, lol. It would be nice to have a future-proof rebuildable version in that tiny form factor...

2. Tube Mods: Does anyone even make 16-19mm devices anymore? I can see that they make DVARW 16s, Kayfun Mini v3s, and Aspire recently launched the Nautilus Nano. But can't really find any quality tube mods that would match. Maybe my tastes are old school...

3. SBS Mods: Or something like the BF16 but way more space-efficient?

Probably lots of stuff I've missed in my research, so:

TL,DR: What are your favorite stealth vapes for MTL?

Thank you to anyone who responds

My favorite setup for stealth vaping is a Dvarw RTA on an Ennequadro Flexy v1 mech SBS.

It's one of, if not the smallest, SBS mod around. Takes an 18650 and the height of the battery compartment is 70mm. A Dvarw MTL 22mm RTA with the 3.5ml tank option fits perfectly.

In my hand it's totally concealed - - - super stealthy. And my hands are not huge!!!

Ennequadro recently released the Flexy v2 SBS with a DNA60 chipset. The v2 is available in derlin and aluminum bodies. It takes up to a 24mm atty. I purchased the aluminum version.

Flexy v2 link:

Flexy v2, THE side by Side by ennequadro

sbs mods , the flexy v2 is elegant and compact

www.ennequadromods.com

ETA: If you create a login at Ennequadro you will then see lower prices.

 

[ShowMeTwice]

The Ennequadro mech Flexy v1 I posted a photo of is no longer made. Giorgio at Ennequadro has no plans to make a v2 mech version.

These days the v1's (mech or regulated) are nearly impossible to find. I do know of a vape store in Dublin who has more of the v1 mech Flexy's in-stock (unsure how many are left). If you are interested in one send me a PM.

 

[Mordacai]

@OnTheFidele I finally remembered that pod that I was trying to think of that others had recommended on the forum.

It's the Justfog Minifit.

It's perhaps one of the smallest pods on the market, if not the smallest.

That's why I was desperately trying to remember the name of it, as a perfect stealth vaping device.

Other than that the Uwell Amulet pod/watch comes to mind too.

 

[OnTheFidele]

The Ennequadro mech Flexy v1 I posted a photo of is no longer made. Giorgio at Ennequadro has no plans to make a v2 mech version.

These days the v1's (mech or regulated) are nearly impossible to find. I do know of a vape store in Dublin who has more of the v1 mech Flexy's in-stock (unsure how many are left). If you are interested in one send me a PM.

Wow checked out Ennequadro and I saw the Imo2s, which look beautiful. Looks like they have one in 14500 in stock, lol, but might be too small for me.

I also saw that VapinArt.com has a Guppy AND Bayou in stock, but I don' t have any carto RBAs. One easy option would just be to pair the Guppy (19.5mm) with the Aspire Nautilus Nano or Kayfun Mini v3 (both 19mm).

As far as mechs go, I do have a Super-T ELA which I realize now I can run short with something like a KFL+

And at those prices, I might just want to get a DotAIO Mini paired with an RBA

Right now, I'm infatuated with those all SS Pipeline Dicodes that were spotted at The Hall of Vape that could take 18350s...

@OnTheFidele I finally remembered that pod that I was trying to think of that others had recommended on the forum.

It's the Justfog Minifit.

It's perhaps one of the smallest pods on the market, if not the smallest.

That's why I was desperately trying to remember the name of it, as a perfect stealth vaping device.

Other than that the Uwell Amulet pod/watch comes to mind too.

Thanks for the tip. Put it on my list for consideration I ordered an Xross 3 Nano which HealthCabin just shipped today, so I'm going to test out that form factor before branching out further into pods

 

[OnTheFidele]

My favorite setup for stealth vaping is a Dvarw RTA on an Ennequadro Flexy v1 mech SBS.

View attachment 995052

It's one of, if not the smallest, SBS mod around. Takes an 18650 and the height of the battery compartment is 70mm. A Dvarw MTL 22mm RTA with the 3.5ml tank option fits perfectly.

In my hand it's totally concealed - - - super stealthy. And my hands are not huge!!!

Ennequadro recently released the Flexy v2 SBS with a DNA60 chipset. The v2 is available in derlin and aluminum bodies. It takes up to a 24mm atty. I purchased the aluminum version.

View attachment 995053

Flexy v2 link:

Flexy v2, THE side by Side by ennequadro

sbs mods , the flexy v2 is elegant and compact

www.ennequadromods.com

ETA: If you create a login at Ennequadro you will then see lower prices.

Apologies for the late response and thanks for helping me identify my potential dream vape: that one tiny mod that @Tor R posted from the vape show. Your setup is awesome. I have a similar but bigger setup: The Dani SBS 18650 with the Kayfun X Mid-end, I'm open. High end, I'm looking for something a bit bigger (the Dani SBS 21700) and something smaller (that Pipelines-Dicodes, maybe?)

 

[Tor R]

My Stealth Vape combo will be Dicode's Dani SbS 18650 Mini, dressed with either FeV v4.5S+,-FeV vs dual, or Steampipe's Corona v8 SC MTL.

I will also have 18350 Battery tube, it will fit perfectly with my GG Caspardina RTA, 22mm tall it is.

Some mods will also be made by myself, small ones, most likely Evolv DNA Go Chipset, for 16-19mm atty.

I have 4 Dicodes Dani SBS 18650, 3 Aspire Mixx, 4 Eleaf Pico Baby sbs, I don't mind more sbs......

 

[OnTheFidele]

My Stealth Vape combo will be Dicode's Dani SbS 18650 Mini, dressed with either FeV v4.5S+,-FeV vs dual, or Steampipe's Corona v8 SC MTL.

I will also have 18350 Battery tube, it will fit perfectly with my GG Caspardina RTA, 22mm tall it is.

Some mods will also be made by myself, small ones, most likely Evolv DNA Go Chipset, for 16-19mm atty.

I have 4 Dicodes Dani SBS 18650, 3 Aspire Mixx, 4 Eleaf Pico Baby sbs, I don't mind more sbs......

Is the Dani SBS 18650 Mini the nme of that beautiful new mod? I will check out those atomizers

Also, your pics of your Dani SBS 18650 were some of the biggest reasons for me getting my silver version. I also very much enjoy my Mixx, which I got as a minor purchase in 2020 while I was getting my Aspire Nautilus GT and GT Mini tanks

 

[Tor R]

Is the Dani SBS 18650 Mini the nme of that beautiful new mod? I will check out those atomizers

Also, your pics of your Dani SBS 18650 were some of the biggest reasons for me getting my silver version. I also very much enjoy my Mixx, which I got as a minor purchase in 2020 while I was getting my Aspire Nautilus GT and GT Mini tanks

Yep, that's what they call the little sbs's from Dicodes, maybe Dicodes will change the name of it when it launches, in early June Keith from Creme de Vape said.

I want it because I'm a SS .... lol, but the 18350 version will be a perfect match for my GG, 18650 for those around 52mm, I have three attys there.

Most likely there will be accessories for it, such as raisers etc

 

[OnTheFidele]

Yep, that's what they call the little sbs's from Dicodes, maybe Dicodes will change the name of it when it launches, in early June Keith from Creme de Vape said.

I want it because I'm a SS .... lol, but the 18350 version will be a perfect match for my GG, 18650 for those around 52mm, I have three attys there.

Most likely there will be accessories for it, such as raisers etc

Wow, thanks for the info!!! I also love SS. With the Dani SBS 18650 I compromised with the silver anodization, but pure SS is my favorite. I'm very happy about this, thank you again

 

[Tor R]

Wow, thanks for the info!!! I also love SS. With the Dani SBS 18650 I compromised with the silver anodization, but pure SS is my favorite. I'm very happy about this, thank you again

I don't usually like silver mods, but I think Dani SBS looks really good in silver.
The ones I have are black, blue, orange, purple, thought of buying it in silver later, I think it goes well with any of the other colors.