i have this also and enjoy it, its vertical build $8.62 Lucid Styled RDA Rebuildable Dripping Atomizer - stainless steel / 25mm diameter / w/ BF pin at FastTech - Worldwide Free Shipping
- Status
Look em up. They have holes or clamps in bottom of deck for coil legs, no vertical posts.
I checked them out on. YouTube.
I also read a post here on ECF and it seems like there is a lot of cons with them, but ofc there are prob lots of different opinions..
How can they earn money on these ridiculous low prices
@Letitia is right fast tech clones are the way to go. I am sitting here with 8 of them and another three on the way. When I look at RDAs I look more at the deck and airflow. So looking at the juice well that is going to be up to you. The Goon and Apocalypse are good but I am not a fan of the clamps I much rather each lead have its own spot. If you would like I can give you the full list of the ones I have ordered so far as well as provide you with my thoughts on them. Just to give the short of it $7.27 Apocalypse GEN 2 Styled RDA Rebuildable Dripping Atomizer - aluminum + brass / 24mm diameter / resin drip tip at FastTech - Worldwide Free Shipping and $6.82 Dead Rabbit Styled RDA Rebuildable Dripping Atomizer - aluminum / 24mm diameter at FastTech - Worldwide Free Shipping are the two that get the most work from me. The Apoc I liked so much I had to get two but the downside to me again is the clamps. I am waiting for my Rabies, Kennedy 24, and Velocity V4 to arrive from them. In short I would recommend getting on fast tech and looking around buy a few and find the one(s) you like and then if you want to get the real one and not a clone go for it that way you are not out a lot of money I mean 4 clones cost you maybe 30 bucks which are the cost of one non-clone, seems like simple math to me. I have heard from some not all clones are as good but that is what reviews and this place is for. 
Easy it costs them about 2 dollars to make it.
My problem with RDAs has been finding those that are good for MTL vaping and simple single coils. For that style of vaping I have recently found the NarDa and the Speed Revolution. Both of these have decent wells and are squonk capable, but if you want wide open airflow DL vaping, these aren't the ones.
Thanks for info, but I am more into Dl’s. That’s why I think I love the RDA vaping.
I have really got a lot of responses on my question, blown away by all the peps taking their time and answer with very great advices!!
You are all great
You are all great
@Letitia is right fast tech clones are the way to go. I am sitting here with 8 of them and another three on the way. When I look at RDAs I look more at the deck and airflow. So looking at the juice well that is going to be up to you. The Goon and Apocalypse are good but I am not a fan of the clamps I much rather each lead have its own spot. If you would like I can give you the full list of the ones I have ordered so far as well as provide you with my thoughts on them. Just to give the short of it $7.27 Apocalypse GEN 2 Styled RDA Rebuildable Dripping Atomizer - aluminum + brass / 24mm diameter / resin drip tip at FastTech - Worldwide Free Shipping and $6.82 Dead Rabbit Styled RDA Rebuildable Dripping Atomizer - aluminum / 24mm diameter at FastTech - Worldwide Free Shipping are the two that get the most work from me. The Apoc I liked so much I had to get two but the downside to me again is the clamps. I am waiting for my Rabies, Kennedy 24, and Velocity V4 to arrive from them. In short I would recommend getting on fast tech and looking around buy a few and find the one(s) you like and then if you want to get the real one and not a clone go for it that way you are not out a lot of money I mean 4 clones cost you maybe 30 bucks which are the cost of one non-clone, seems like simple math to me. I have heard from some not all clones are as good but that is what reviews and this place is for.
I first found out about FastTech last week and when I first saw the prices they had, I thought it was a scam site. But I read about them here on the ECF and found out they’re legit. I ordered Goon 1.5, boxer squonk and a very cheap Vgod clone mech mod. I also had in mind that I wanted to test out the clone’s before buying the real deal.
Btw I am looking for a small but powerful mini mod, is there one you have seen on FastTech?
I got an Aromamizer Plus (postless) 2 weeks ago and for building dual coils it's simple and quick. Only trick is cutting the legs to the right length. Easier for experienced builders and I am getting used to it quick. I also picked up a couple other rebuildables on the super cheap, a royal hunter mini which is 3 post, and a bushido rdta which is 2 post with 1 hole per post and thumb screws on top, both 3$ each, and boy I will tell you, that bushido, for dual coil builds, is terrible! That was a hard one for me to build lol, but fun at the same time, a challenge.
Last edited:
Fastech is definitely legit and has an absurd selection. I think they are good about labeling clones as clones also. Only catch is shipping time.
Well he already has the Goon so I guess it is time to do that.
I have the Goon 1.5 as well, well a clone at any rate and I like it, in fact, I have a set of Tidal Coils from Advanced Vape Supply in it right now. As to mods I run bigger ones I have the Teslacigs Punk and the Joyetech eVic Primo 2.0 so can not really help you on that one other than to say I have been looking at $43.40 Authentic ETALIENS E.T-X2 80W VW APV Box Mod - 7-80W / 1*18650 / zinc alloy at FastTech - Worldwide Free Shipping and $38.77 Authentic Tesla Nano 120W VW APV Box Mod - 7-120W / 2*18650 / temperature lock / OLED screen display / innovative taste control / memory function at FastTech - Worldwide Free Shipping but not sure what your idea of small is so there is that.
Welcome and glad you joined.
I break down RDA's into 4 basic categories. Large cloud (sub-ohm) duel/single coil setups and normal cloud (non sub -ohm ) duel/single coil setups. You can get great flavor from all combos. It's just a little easier/cheaper to build using higher ohm/single coil setups, taste wise, I'm real happy with higher ohm/single RDA's.
I have several of the 2 post Magma's which are set up for single coil usage (The Magma's can be set up for duel coils). All are deep well and can last me an hour before re dripping. If you sub ohm, I suspect you are going to have to re drip much more frequently.
re: https://www.e-cigarette-forum.com/forum/threads/magma-rda-from-paradigm.538555/
Very special looks on the ETALIENS E.T-X2, cool inspiration from Alien. I like that it is all metal and 80w is more than enough for me when using RDA. But the design makes it kind of big
The Authentic Tesla Nano 120W I really liked. It`s kind of classy and the size seems ok. I like to use higher wattage when using tanks, so 120W is perfect for both RDA and Tank.
I use a Ijoy Captain PD270 right now and that is a little inconvenient to have in my pocket, so a bit smaller than that....
Last edited:
The Magma seems like it is the "Bentley" of RDA`s and I like it, but over 100$ is a bit steep to me to pay for testing it out....
, is there a clone? The well is deep and 2ml`s(your rewiew) and an hour of vaping is great for RDAI`m testing single coil right now in my DR and I think I get more taste, but maybe I should try higher ohm, use a .2 clapton...?
If it is just an issue of it being in your pocket have you given thought to use a belt case? $4.11 Authentic Coil Father Pbag for E-Cigarette at FastTech - Worldwide Free Shipping or maybe a custom Vape cases
- Status
