HELP ME! DOES IT EXIST? Cigalike size glass tank replaceable coil clearomizer/glassomizer?

[Gary E. Maurizi Jr]

Does such a thing exist?

I've looked at the following products:
vision nano clearomizer (seems to be plastic tank)
mistic bridge clearomizer (seems to be plastic tank)
kanger t4s (cant tell if its a glass tank or not? is this a cigalike diameter tank?)
su510 from trueman ecigs (seems to be some plastic, some glass, but may be a typo)

I want a pyrex or glass tank refillable clearomizer/glassomizer with replaceable coils that will fit perfectly on the end of a cigalike battery and keep it low profile/sleek, so the same diameter as a 510-t battery.

Anyone?

I see some cigalike diameter glass tanks marketed for [removed] that have glass tanks and replaceable coils, but how well would these work filled with ejuice and thrown onto the end of an automatic cigalike battery?

*SERIOUS bonus points if you know of something that fits the bill is bottom coil and/or also allows you to use your own drip tip!

 

[Belhade]

The smallest glass tank I know of is the Protank 2 mini, that might be what you're looking for.

 

[Rangertrix]

The protank mini series are ego sized, which is considerably larger than a cigalike battery.
T4s is not glass.

 

[Gary E. Maurizi Jr]

The protank mini series are ego sized, which is considerably larger than a cigalike battery.
T4s is not glass.

This is what I was afraid of... I don't think it actually exists! that's just wild.
I desperately want a cigalike size glass atomizer/glassomizer with replaceable coils, sigh.

Have you seen the smok e-slim? its close, but the coil is built into the 510 thread base which is a bummer, and they seem to be impossible to find replacement coils for now. It's significantly smaller than a protank mini, about 3.2 mm more diameter than a cigalike at 9.2mm...

Am I allowed to post outside links to store sites? I would really like to know if some of these clearomizers meant for 'super thick liquids' work with standard ejuice as well as say a regular ce4, as they do have pyrex glass tanks and replaceable coil-heads with stainless steel drip tips, and the coil heads seem pretty identical.. kanthal, OCC cotton, and similiar sized wicking holes & resistances? I have no use for these types of products so have no idea how they work or are used...

 

[Susan~S]

Am I allowed to post outside links to store sites?

Yes, you can post links to stores as long as the links are for products meant for vaping eliquids.

 

[quittingvegas]

At one point they sold an evod glass tank. Is that what your looking for?

Kanger EVOD Glass eGO Bottom Coil Clearomizer

 

[Gary E. Maurizi Jr]

At one point they sold an evod glass tank. Is that what your looking for?

Kanger EVOD Glass eGO Bottom Coil Clearomizer

It's close -- thats 14.2 mm when a cigalike is 9.2 mm, the smoktech e-slim is 11 mm and can be purchased with glass tubes so it's a bit closer in size... A glass ego clearomizer could be used with an ego/510 adapter.

I'm afraid to ask the question that I really need the answer to, as cigalike diameter (9.2mm) replaceable coil glass clearo's do seem to exhist, just not for vaping ejuice, and I am a bit fuzzy on the limit there for discussions on ECF. Maybe reddit is a better place to ask that particular question.

Thanks!

 

[The Cloud Minder]

Good news: they have exactly what you are looking for at Arcad's Vapes
Bad News: Arcad's Vapes doesn't exist in this reality.

 

[Completely Average]

The problem is to get a glass tank the size of a cigalike either the glass would be so thin that any bump would shatter it or the volume of the tank would be so small that it would be unusable

The glass on a glassomizer is typically around 1mm thick. So, being round in shape that would be 2mm of just glass for the tank. A cigalike is only 9mm in diameter, so that would only give you 7mm to fit your coil, wick, and chimney inside. Figure the internal diameter of the chimney is at least 2mm thick and another 1mm for the walls of the chimney and now you're down to just 4mm. Now your coil is probably going to have an external diameter of close to 2mm so the base of the chimney will be more like 4mm in diameter and perhaps 10mm tall. Now you're down to just 2mm of space on the sides of the chimney and maybe 20mm of space in the height to fit your juice into. You would be lucky to get .2ml of juice into the thing and you would have to use a tiny syringe to fill it.

 

[skoony]

Kanger T4's are plastic, Kanger esmart are glass.
They fit kr808d1 type cigalikes. V2 style. the male
threads are on the battery,female threads on the carto.
808D-1-Threaded Vape Clearomizers & Tanks

 

[drysprocket]

I got this the other day on a whim...is this what you're after? it is cigsize, and does allow you to use your own elquid (only 1mil but it does last a bit) and has coils (2.6 I think) It's pretty cool, but I'm not sure it fits the bill of what I was hoping. It's a really cool vape, and i think I need some warmth. Also, I'm pretty sure it's plastic on the top. Also comes with a spare though.

It's by Raze Vapor and called the T2. If you search youtube you can see how small it is. Sort of a hybrid between something like gas station ecig and a vapor start kit as we think of it. My only issue is I do get some juice in my mouth, but it could be because I'm pulling it too hard. I do love the idea of it though.

 

[retired1]

I'm afraid to ask the question that I really need the answer to, as cigalike diameter (9.2mm) replaceable coil glass clearo's do seem to exhist, just not for vaping ejuice, and I am a bit fuzzy on the limit there for discussions on ECF.

Why we don't allow drug talk