Focusecig Skyfall 3 in 1 squonkable tank RTA, bf RDA and regular RDA

[roxynoodle]

I have been sent the new Skyfall RBA from Focusecig for feedback.

What is it? Well, its a very innovative design that allows the user 3 configurations. It can be used as an RTA with a tank beneath that can squonk (wet the wicks) by pushing down on a ring near the top of the tank. You may also use the deck as a regular rda on any mod or with a bf 510 pin for use on a bottom feeding mod like a Reo.

Where can I get one? In the US at VaporDNA for $39.99. I have a coupon code for $10 off for you:
VaporDNA.com - Friend Offer
I'm not sure how long the coupon is good for.

Here is a video from Focusecig:


Unfortunately I was missing a part to make the electrical connection to the squonk tank, but expect it tomorrow. So for the past several days I've been using it as a bottom fed RDA on a Reo. I do know the tank squonks well though as I tested that feature. Plenty of pics and feedback tomorrow when I get the part.

Features:

Glass tank
22mm diameter
Adjustable 510
Roomy build deck with two posts. Post holes are large and should accommodate large twisted or Clapton coils. The post screws are very nice also with large Phillips heads.
Side airflow
Single or dual coil
Large chuff cap
Cap with 510 drip tip also and can use other 510 drip tips in it
Plenty of spare parts

Tomorrow I will test the squonk tank for you with the 0.55ohm dual coil build I've been running on the Reo. Then I will test a single coil build, and a more interesting dual coil build. Stay tuned!

 

[TKS]

Amazing value for the feature set. Provided the fit or finish doesn't leak or basic things of that nature.

 

[roxynoodle]

The machining is very good. Better than most budget friendly authentics. From my limited testing of the tank, it drains well and quickly. I'll certainly put it through the paces tomorrow and provide feedback on the different builds. I think this atty can appeal to a wide range of vapors.

 

[MattyTny]

That's a pretty cool liquid feed feature, kind of a cleaner take on the 3D dripper. How's the size? It looks tall, but considering the liquid capacity(no obstructing wide chimney) it looks well worth it. Actually it looks like there isn't much wasted space when all the components are separated.

 

[roxynoodle]

I'll compare it with my other tanks. I felt like some of my others are taller: Rose v2, Focloud, eXpromizer and Aga t7 are all pretty tall. I'll post some comparison pics.

 

[DiscoRanger]

How's the airflow on the provided rda? Because I found out my royal hunter barrel fits on my velocity deck, so I was thinking I could buy the bottom feed pin for the velocity and then use that setup, unless if my royal hunter barrel fits on the provided rda. But if not would that work? Or would it not fit properly? It does look pretty tall haha. Oh also does the wider bore drip tip get hot? It doesn't seam to be lined with delrin or anything just stainless steel.

 

[roxynoodle]

How's the airflow on the provided rda? Because I found out my royal hunter barrel fits on my velocity deck, so I was thinking I could buy the bottom feed pin for the velocity and then use that setup, unless if my royal hunter barrel fits on the provided rda. But if not would that work? Or would it not fit properly? It does look pretty tall haha. Oh also does the wider bore drip tip get hot? It doesn't seam to be lined with delrin or anything just stainless steel.

I'll try to answer all those questions today . I can say the airflow is very adjustable.

I was also thinking other bf RDAs could work on the tank. I'll try some out

 

[roxynoodle]

The missing part is here, and they included a second squonk tank So I'm going to set one up for the Skyfall deck and try the other with my other bf RDAs.

 

[DiscoRanger]

Do you have a lowpro? And sweet let us know how it all works!

 

[roxynoodle]

Do you have a lowpro? And sweet let us know how it all works!

I don't, sorry. I have a Nuppin v1, Cyclone and Velocity. I'll be trying those next.

 

[roxynoodle]

Build 1 for squonk tank

Coils: 9 wraps each of 26g for 0.55 ohm. I was using this build on my Reo with just the RDA section while I waited for the missing part to arrive



Wicking: I tucked my wick tails beneath the coil, close to but not blocking the squonk holes beneath the block.

Ok, NM, Photobucket keeps crashing on me! I will try later to post more pics for you. I did also take one with it on my Sigelei 50W for you to see the size. It is smaller than my tallest attys like the Rose v2 by quite a bit. It's slightly shorter than my 6ml Aromamizer.

Verdict: very pleased with the performance of both the RDA and the squonk tank. Its putting out quite a respectable cloud at 30W with very good flavor. I even used a juice I don't like that much since I'm testing and it's tasting quite flavorful! No leaks of any kind.

Fills easily using a needle tip bottle. I just used a plastic needle tip bottle, not a metal tip. I do think filling with an eye dropper is a no go though. I am not going to try it.

Cons: it was a little fiddly adjusting for the electrical connection. I had to unscrew the 510 pin in the RDA one full turn to do it or the adjustable nut in the tank wasn't going to be threaded onto the tank's long 510. I did one full turn because I needed the holes in the bf pin to line up with the holes in the block on the deck.

All in all though I'm very pleased with the performance! I've been wanting a regulated squonker for a while now. The Skyfall allows me to use any mod I have as a squonker. And when it comes to dripping, I'm lazy, lol! I have a ton of RTAs for a reason. I don't like to leave juice sitting out because I don't want a member of my animal family getting poisoned. And I get tired of walking to the kitchen, getting it out of the cupboard, filling my dripper, cleaning up the mess, taking my vape back to the living room and repeating over and over. So when I drip, I squonk

I'm going to set up the spare squonk tank now and try my other bf RDAs on it. Well, the Cyclone and Nuppin. I need to rebuild the Velocity. But, if the other 2 go well, I'll be building that Velocity soon. I've wanted to put Claptons on it, but wanted a regulated squonker to run it. I think I might have the solution for that now!

 

[roxynoodle]

The other squonk tank is working with the Nuppin. It looks goofy, lol! I'm going to build the Velocity in a bit, and put that on it. It will be pretty tall with the Velocity.

 

[DiscoRanger]

It sounds like most things are working with it just fine! Even tho look goofy haha

 

[roxynoodle]

It sounds like most things are working with it just fine! Even tho look goofy haha

It is . I really like the flavor of the included RDA, but its cool I can regulated squonk others as well.

 

[roxynoodle]

Testing bf Velocity on Skyfall tank now. This makes for a tall combo, but it vapes well.

Build: 26/32 Claptons, 6 wraps, 2.5mm diameter, 0.4 ohm.

 

[DiscoRanger]

Well I'm convinced I'm picking one up next paycheck thank you for the review and all that!

 

[roxynoodle]

Well I'm convinced I'm picking one up next paycheck thank you for the review and all that!

You're welcome. Use the coupon link I posted so you can save $10.

 

[roxynoodle]

I've been using the Skyfall for 1.5 days now. It doesn't leak unless I oversquonk. Then, like any RDA with side airflow, you can get a bit of juice oozing out the airflow slots. Not as much as I sometimes get from my Derringer though. None has gone down the tank or onto my mod. I've had to blot the RDA part by the airslots a couple of times though. I've refilled once so far as I have a lot of attys.

When I change builds or have any issues or other comments, I'll update.

 

[Btsmokincat]

Nice! I'm glad to hear it's working well for you! I'll be getting one soon as well!

 

[Oregon Linda]

Roxy, is this a good RTA for mtl vapers? How does the flavor compare to a Rose or Erlkonigin? It's an attractive authentic because of the price and all the features, so I'm wondering if it will fit my vape style.