MTL...

[Eskie]

No problem, just to warn you though to say its mtl it does guzzle juice alot!

A Triton mini? Granted I use a higher nic juice in it than my regular 6 mg DL stuff, but I can get almost a day out of it.

I can't be as bad as my TFV8 Cloud Beast

Try getting a Pharaoh. Even with just a single coil build, it blows through juice that makes my BBB feel like a mtl sipper.

 

[Skold]

I was thinking of the Pharoah

 

[Skold]

I can't be as bad as my TFV8 Cloud Beast

Definitely not!

 

[poirot]

I'm starting to think i'm an odd one out around here Whilst i do vape DTL occassionally, although it's a conscious choice to, i usually use a MTL technique on everything i own or try. When i vape without thinking about it i instinctively MTL.

I am quite happy MTLing hardware designed for DTL people in a configuration they would be happy with i.e. air flow wide open on high watts and low ohms. I am also happy using MTL specific devices which can't be used for DTL.

Is this unique or are there others out there MTL on anything available.

you are not alone I mtl but just havent tweeked it enough yet I use an Isub v with a 0.5 coil run at 25 27 watts still ing problemsthoughha

 

[poirot]

Got myself a Nautilus 2, couldn't find anything else suitable out on my travels.

My first go with it hasn't gone well so far. I've put the 1.8ohm coil in, filled it with some 50/50 3mg juice and put it on my Kanga Mini Mod and its just gurgling and spitting at me on anything between 12 and 14w on any airflow

EDIT: I think the juice is too thick for the 1.8 ohm coil

on the nautilis 2 do not fill it to much that is why it could be gurgiling there is a line on the coil not to go past

 

[benley73]

Flash E vapour V4 ,
Or clone Ser Fev V4 , 22mm 5ml cap , running a 3mm 9 wrap 316L 26g build , Now this is one good Flavourful MTL , different reducers , no blowing big clouds unless you take out the reducers , but the Flavours are very nice strong , watched a few German reviews on this and them all raving on about it ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[Skold]

you are not alone I mtl but just havent tweeked it enough yet I use an Isub v with a 0.5 coil run at 25 27 watts still ing problemsthoughha

I've got an Isub mini apex but it's hard to seen where it's filled up too & I got the I sub v with my coolfire 4 100tc, ain't bad at all.

My red nautilus 2 was leaking but I got another today with my aspire zelos kit, I filled the tank & let it sit then tipped it upside down. Had no leaking whatsoever.
I think I overfilled my first n2 and I think it works better if you just let it sit too.
I've known people to put a few drops on the cotton. Dunno why but my friends leaked when she did that.
So let the juice sit for ten minutes an tip it upside down an it's fine.
Really good tank and not a bad mod either, good value if you need a cheap setup an vape at low wattage.

 

[Skold]

Flash E vapour V4 ,
Or clone Ser Fev V4 , 22mm 5ml cap , running a 3mm 9 wrap 316L 26g build , Now this is one good Flavourful MTL , different reducers , no blowing big clouds unless you take out the reducers , but the Flavours are very nice strong , watched a few German reviews on this and them all raving on about it ,

Sent from my ONEPLUS A3003 using Tapatalk

Nice setup

 

[r77r7r]

I've got an Isub mini apex but it's hard to seen where it's filled up too & I got the I sub v with my coolfire 4 100tc, ain't bad at all.

My red nautilus 2 was leaking but I got another today with my aspire zelos kit, I filled the tank & let it sit then tipped it upside down. Had no leaking whatsoever.
I think I overfilled my first n2 and I think it works better if you just let it sit too.
I've known people to put a few drops on the cotton. Dunno why but my friends leaked when she did that.
So let the juice sit for ten minutes an tip it upside down an it's fine.
Really good tank and not a bad mod either, good value if you need a cheap setup an vape at low wattage.

Another Zelos owner here. Let me know what you think of it? Only had mine a few wks. Power user only.

Battery life seems really great, but maybe just in comparison to a bad Istick.

 

[Skold]

I will post after a couple weeks
I have an istick power with a triton mini so at low wattage I get a good couple days with that 5000 mah battery but the damn thing misfires! My mvp4 seems to have less issues.

 

[benley73]

Nice setup

Was thinking of trying mesh coil on it

Sent from my ONEPLUS A3003 using Tapatalk

 

[tj99959]

Still the best Tottle Puffer around!

 

[Skold]

What's mesh coil?

 

[benley73]

What's mesh coil?

Using a sheet of SS mech cut to size , then used between + an - posts instead of wire for heating , place cotton inside - under it for heating insted of a wrapped coil of wire ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[Skold]

I don't build you've lost me

 

[QuitTheStinkies]

The best true MTL tank has to the Kayfun Mini V3. It's a flavour beast, easy to build on, top fill, easy to pocket at 19mm, and nice to look at.

I haven't tried anything yet that beats it.

QTS


MOUTH TO LUNG VAPERS
on Facebook

 

[vapdivrr]

The best true MTL tank has to the Kayfun Mini V3. It's a flavour beast, easy to build on, top fill, easy to pocket at 19mm, and nice to look at.

I haven't tried anything yet that beats it.

QTS


MOUTH TO LUNG VAPERS
on Facebook

Totally agree with this, the km3 is hard to beat

Sent from my SCH-I545 using Tapatalk

 

[Skold]

Totally agree with this, the km3 is hard to beat

Sent from my SCH-I545 using Tapatalk

Was thinking of getting it for my first rta, very praised by a lot of mtl vapers. It's calling my name

 

[Skold]

I have found a provari mini so it's to go with that.

 

[vapdivrr]

Was thinking of getting it for my first rta, very praised by a lot of mtl vapers. It's calling my name

You won't be sorry, the only con is a 2ml capacity. I personally love the small tank but some like bigger tanks.

Sent from my SCH-I545 using Tapatalk