Indulgence -- titanium - only -

[Di]

INDULGENCE -- TITANIUM - ONLY -


Indulgence Starter Kit --- Titanium -- $59.00


INDULGENCE PARTS --

we have now separate pack with -
set of - 4 x end caps with adapters = $10.00

The Indulgence endcap -adapters is the soul of the Indulgence PV,
it is needed for the use of the Indulgence Passthru also
Indulgnece End-Caps has 4 different threads:
510 thread, 801 thread, 401 thread, 901thread,(KR808d-1)
It fits the most popular models in the market.

we have now separate pack with -
1 x Button section = $20.00

The manual switch is the heart of the Indulgence PV,
it is needed for the use of the Indulgence Passthru also
This Indulgence switch is tested by machine,
for 1million presses without sticking or failure

we have now separate pack with -
1 x Indulgence Universal Charger = $5.00

This Indulgence Universal Battery Charger
(provided also with the Indulgence Manual STARTER KIT)
Universal Indulgence charger can charge
18350, 18650,16340, 10440, 14500. from 3V to 3.7V.
it has PCB inside to protect .good qualilty .

we have now separate pack with -
1 x 18650 Protected Battery - 3000mah = $6.50

Protected 18650 Battery has 3000mah ,
Please make sure that our 18650 battery has the protected PCB inside
which has both overcharge and short-circuit protection.
This battery is specially made for Indulgence,
and it could last almost a whole day with Indulgence.
please do not use any other battery
that you bought from other place in our Indulgence.

 

[Jimi Mack]

I just found out that the original threaded adapters and the new ones are not inter changeable. It seems the pin on the new manual switch is now raised and the new adapters will not work on the original manual switch. Which also means the new manual switch does not work with the old adapters, I have tied and have had no luck.

Why not make it so the old will work with the new?

 

[Di]

Hi JM


can I ask you to wait a little while till we get more feedback with this please,

I have not got mine yet,

so I cannot comment ------

I hope we can have some more feedback from others real quick,
so we can look at this with several pairs of eyes, ------

 

[mwa102464]

Those new end caps look beautiful to me, I can't wait to try these out.!!!

 

[Di]

Please post here when you get them--

what do they fit with --

old Indulgence button, or not ?????


maybe we have to buy the new button section
and the new adapters together
for the new replacements .......

 

[mwa102464]

I will have everything soon I'm awaiting a nice sized delivery and with the new one and old one side by side I will separate everything and find out who's who of these Indulgence Mods for sure

 

[Di]

I will have everything soon I'm awaiting a nice sized delivery and with the new one and old one side by side I will separate everything and find out who's who of these Indulgence Mods for sure

Thanks matt

if we get a few peeps to try all the bits,
and see what fits and works with what please,

would be helpful---

 

[Tread1]

I got my 2 buttons and a new adp set on friday and drove myself crazy over the weekend.My 2 old buttons are dead so I can't check that but my new button/old adp doesn't work on one button and the second new button is completly DOA,doesn't work with old or new adp. .I've checked everything with my multimeter.I have tried with a passthru and battery,I even put conductive paste on the threads,one dead button and one that only works with the new adp.

 

[Di]

I got my 2 buttons and a new adp set on friday and drove myself crazy over the weekend.My 2 old buttons are dead so I can't check that but my new button/old adp doesn't work on one button and the second new button is completly DOA,doesn't work with old or new adp. .I've checked everything with my multimeter.I have tried with a passthru and battery,I even put conductive paste on the threads,one dead button and one that only works with the new adp.

thanks Tread1 and -- Jimi Mack


I will speak to David about this problem and see what is happening here--------------

 

[Di]

OK,

I just got off the video phone with David,

he showed me the new button and new threads, with the old Indulgence, and mixed and matched,

aside from some little difficulty in screwing them together some times, - new threads etc, - they worked perfectly--

so maybe there are just a few bad ones out there??

any ways,

we discussed, and David said, try to screw it well together to make sure of good connections,

then if still no good,

please contact Customer Service for return and replacements.

thank you guys -


Customer Service email :- support@eastmall.net

your order number in the subject line

your real name and your forum name

and your tracking number (if you have one)

and a simple and brief explanation of your issue.

and I am sure he will try to help you

 

[bluesuede]

Was looking for this post and here it is... Kinda explains why my new titanium end caps don't work.

 

[bluesuede]

Did Matt ever say???

 

[Di]

No -- he never did come back and give us a report on all this compatability issues.

 

[Di]

I doubt that the issue is to do with the different switch units, but you never know.
Is the copper spring top on the switch unit making contact with that of the connector portion?



yes, this is the problem -----

here is a pix
of the button sections

first my lovely drawing of it -- hahaha

and here my lovely fuzzy photo- my camera skill is very bad, hahahaha

you can clearly see that one will connect cos its pin sticks up

the other is recessed, and so cannot connect ----
unless the threads have a sticking up pin to reach down in there to connect to it.

I have 4 Indulgence set ups like the first one, and have no problems with the new button section and or the new threadca[ps on all of them.

I have one where the button section is recessed like this second pix -
and the new threadcaps do not connect ------------

there ya go --

Investigation complete,

sherlock Di has triumphed,
if your button section has a recessed connector pin

the new threadcaps will not connect, - cannot reach - hahaha
you will need the a button section with a sticky uppy connector pin ---
to use the new threadcaps.



the only thing i cAn say is send to

Customer Service email :- support@eastmall.net

tell Joy you have got only the new Titanium threadcaps
and does not work with your older silver button section -----
because your connector pin on your button section is recessed - (set down below the top level)

I have discusses this with Joy extensively- she and I agree this is the problem,
so she will know what you mean if you say this -------

 

[bluesuede]

My silver button connector pin is not recessed. It sticks up above the edge like your #1 drawing. About 1mm I'd say or maybe a fraction less. That aside, you did a really good job of explaining and your pic finally connected with my brain... hahahaha

Maybe it sticks up more on the new button units? I mean, maybe mine doesn't stick up enuff...

 

[Di]

My silver button connector pin is not recessed. It sticks up above the edge like your #1 drawing. About 1mm I'd say or maybe a fraction less. That aside, you did a really good job of explaining and your pic finally connected with my brain... hahahaha

Maybe it sticks up more on the new button units? I mean, maybe mine doesn't stick up enuff...

Yes, no probs Blu --

you have one with not enuf stickeee uppy -- hahahahaha

dont you just love my technical terms - lol hahahahahaha

soooooooooooooooooo, -----

if your button section has a recessed connector pin
or if your pin is too short ---- it is errectively challenged -- hahaha

the new threadcaps will not connect, - cannot reach - hahaha
you will need the new button section with a bigger sticky uppy connector pin ---
to use the new threadcaps.

the only thing i cAn say is send to

Customer Service email :- support@eastmall.net

tell Joy you have got only the new Titanium threadcaps
and does not work with your older button section -----
because your connector pin on your button section is recessed - (set down below the top level)
or is too short to give a good connection ----

Please ask her to send you a new button section with larger connector pin -
we all like a better connection ----- lol

I have discussed this with Joy extensively- she and I agree this is the problem,
so she will know what you mean if you say this -------