xvostick clone any owners?

Status
Not open for further replies.
23366706181_62a9ced928_n.jpg

23340750282_738af3e4a8_n.jpg

23153421100_e676a15af7_n.jpg


I've got no complaint over the air drawn from it and I think it's worth noting that the there is slight gap surrounding the atty.

Notice the third picture, there is minor cosmetic defect there. After having the clownstick, i'm in consideration to get the authi but having followed the thread on the authi, it's really bugging me.

While searching for SBS mod, I've also came across fulgoris (uses yihi) and continental mods (which is way too expensive - currently running preorder). I'm thinking if i should look into fulgoris further instead but the size of this "xvostick" really caught my interest.

Anyone owns fulgoris could comment on the size difference?
 

rhelton

Vaping Master
ECF Veteran
Verified Member
Aug 15, 2014
4,161
15,514
spokane, wa
I have had my 3FVape version for just about 2 months now and it still works great.
I ordered mine this morning from FT they had them in stock. Do 23mm atty's fit in it ok?

edit: I see the Aromamizer fits and that is 23 I think so that is good.
 
Last edited:
  • Like
Reactions: DPLongo22

ZeroOhm

Super Member
ECF Veteran
Verified Member
Nov 7, 2013
604
639
UK
23366706181_62a9ced928_n.jpg

23340750282_738af3e4a8_n.jpg

23153421100_e676a15af7_n.jpg


I've got no complaint over the air drawn from it and I think it's worth noting that the there is slight gap surrounding the atty.

Notice the third picture, there is minor cosmetic defect there. After having the clownstick, i'm in consideration to get the authi but having followed the thread on the authi, it's really bugging me.

While searching for SBS mod, I've also came across fulgoris (uses yihi) and continental mods (which is way too expensive - currently running preorder). I'm thinking if i should look into fulgoris further instead but the size of this "xvostick" really caught my interest.

Anyone owns fulgoris could comment on the size difference?

I only saw a review of the last revision of the fulgoris 2-3 weeks ago I think and it was a DNA40, I have had mine for almost a year as far as I know there are no SBS mods @ 40W that can compete in size with the Xvo.
I ordered mine this morning from FT they had them in stock. Do 23mm atty's fit in it ok?

edit: I see the Aromamizer fits and that is 23 I think so that is good.
As others have posted a true 23mm atty should fit fine but something like a Taifun GSL won't fit due to the AFC rings increasing its diameter beyond 23mm.

Vape on!;)
 

ToolmanTexas

Ultra Member
ECF Veteran
Verified Member
May 14, 2014
2,747
14,645
T for Texas!
Got my xvo from FT this week and have opened a ticket. Not only does it always ask me "new coil" in wattage mode but it stops firing/screen blank randomly.

I'm hoping to replace it with another and see if I can get one that doesn't stop firing. I love the feel/look of the mod when it's working!
 

pokemom

Ultra Member
ECF Veteran
Verified Member
Apr 24, 2014
2,087
9,739
Lauderhill, Florida, United States
Got my xvo from FT this week and have opened a ticket. Not only does it always ask me "new coil" in wattage mode but it stops firing/screen blank randomly.

I'm hoping to replace it with another and see if I can get one that doesn't stop firing. I love the feel/look of the mod when it's working!
Exactly how the one I received from FT behaves. I'm trying to find a modder to replace the board. I was so excited when I got it that I threw the "black box" away, so I don't have all the parts.

I love the form factor of this thing, but I can only use this one when I have extreme patience.

Sigh.
 
  • Like
Reactions: ToolmanTexas

ToolmanTexas

Ultra Member
ECF Veteran
Verified Member
May 14, 2014
2,747
14,645
T for Texas!
Exactly how the one I received from FT behaves. I'm trying to find a modder to replace the board. I was so excited when I got it that I threw the "black box" away, so I don't have all the parts.

I love the form factor of this thing, but I can only use this one when I have extreme patience.

Sigh.

I'm wondering if the other sku at FT has the same issues. My sku is 3574401 $42.53 XvoStick Styled 40W TC VW Variable Wattage APV Box Mod - 1-40W / 1*18650 / aluminum at FastTech - Worldwide Free Shipping
 

pokemom

Ultra Member
ECF Veteran
Verified Member
Apr 24, 2014
2,087
9,739
Lauderhill, Florida, United States
A couple of things that eliminated new coil message for me...

Use a higher amp battery.
Remove set screw in deck and move deck up and down a few times to improve ground
Check ground screw under bottom plate
Thanks, I'll try that. I switched to a 30A battery, I don't think I can go higher than that (and I don't own anything higher)

I'm not sure how to remove the screw in the deck. It looks like it is all the way down and doesn't have a Phillips or flat head (looks like a grub screw) is that what yours looked like?


Sent from my iPhone using Tapatalk
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,864
182,099
Midworld
Exactly how the one I received from FT behaves. I'm trying to find a modder to replace the board. I was so excited when I got it that I threw the "black box" away, so I don't have all the parts.

I love the form factor of this thing, but I can only use this one when I have extreme patience.

Sigh.

:(

I'm very sorry to read that there are so many issues with these now. I was truly hopeful...

@2423kids , maybe hold off on pulling that trigger for a bit?
 

mgmrick

Ultra Member
ECF Veteran
Verified Member
Sep 12, 2010
2,813
2,369
65
New York
Thanks, I'll try that. I switched to a 30A battery, I don't think I can go higher than that (and I don't own anything higher)

I'm not sure how to remove the screw in the deck. It looks like it is all the way down and doesn't have a Phillips or flat head (looks like a grub screw) is that what yours looked like?


Sent from my iPhone using Tapatalk

I switched to efest 35 amp batteries. The setscrew is an allen screw I don't know size it's posted somewhere in this thread. It is a common ecig size as I have a couple that came in parts kits with atties
 

pokemom

Ultra Member
ECF Veteran
Verified Member
Apr 24, 2014
2,087
9,739
Lauderhill, Florida, United States
:(

I'm very sorry to read that there are so many issues with these now. I was truly hopeful...

@2423kids , maybe hold off on pulling that trigger for a bit?
I just wish I didn't like using it so much!! That's why I want a modder. I'm SO willing to replace the board to keep the form factor. It might wind up costing me as much as the authentic, but now I'm kinda hooked AND hopefully I don't have to send it overseas.


Sent from my iPhone using Tapatalk
 

pokemom

Ultra Member
ECF Veteran
Verified Member
Apr 24, 2014
2,087
9,739
Lauderhill, Florida, United States
I switched to efest 35 amp batteries. The setscrew is an allen screw I don't know size it's posted somewhere in this thread. It is a common ecig size as I have a couple that came in parts kits with atties
Thanks.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: DPLongo22
Status
Not open for further replies.

Users who are viewing this thread