Click the mods power off. Hold up and down button simultaneously and flip away.
WISMEC Reuleaux RX200 TC
- Thread starter USMCotaku
- Start date
- th_trl_thread_readers 0
- Status
That black and white one is gorgeous.If you do get a black one later, there are some pretty cool color combinations people are doing with the two. I bought two black ones from a B&M store ($55 each out the door) and I might return one unopened black one and swap for a white one, just for the color combo's.
Sent from my M7_PLUS using Tapatalk
That doesn't flip the up and down buttons though.
Sent from my M7_PLUS using Tapatalk
How did you get the red in the screen?
If you do get a black one later, there are some pretty cool color combinations people are doing with the two. I bought two black ones from a B&M store ($55 each out the door) and I might return one unopened black one and swap for a white one, just for the color combo's.
Storm Trooper mod!
It is pretty sexy. It is just to bad you have to buy two of them to make it work. Not really crazy for the green and black combo.
It is pretty sexy. It is just to bad you have to buy two of them to make it work. Not really crazy for the green and black combo.
It is pretty sexy. It is just to bad you have to buy two of them to make it work. Not really crazy for the green and black combo.
The picture is from the RX200 facebook group. A member posted it there. He said he used cellophane to do it and another member said he uses head light tint from auto shops to do it. Poster stated he would post step by step pictures "around 7pm pacific time), which was 40 minutes ago.
I guess it would be pretty simple to do, just remove the front panel and put a piece of colored plastic over the screen and then reinstall the front cover.
For some reason I can not link directly to the facebook page, but if you search in facebook "Reuleaux by Jaybo and Wismec" that is the group and it is one of the top few posts currently. Group is "closed" so you will have to apply and be accepted whenever an admin comes around.
JayBo was interviewed and takes credit for that idea. He goes on to say it's one of the things he's most proud of.
An industrial designer shouldn't have to be making battery safety decisions to begin with.
I'm disappointed in Evolv on this one.
They should have put reverse cell protection on the chip.
If Evolv's EScribe can change the duration of the fade-out time of the display, and allow Star Wars themed screen graphics, it should have basic battery safety features.
/off topic Evolv rant
Back to the RX200 (which does have reverse cell protection on the chip)...
Last edited:
JayBo was interviewed and takes credit for that idea. He goes on to say it's one of the things he's most proud of.
An industrial designer shouldn't have to be making battery safety decisions to begin with.
I'm disappointed in Evolv on this one.
They should have put reverse cell protection on the chip.
If Evolv's EScribe can change the duration of the fade-out time of the display, and allow Star Wars themed screen graphics, it should have basic battery safety features.
Well it figures I have managed to insult almost everyone today.
Actually I have looked at that Plastic Ring thing and can't imagine how it could possible work with all the different brands of batteries out there.I didn't know until your post that it was not electronically protected against Reverse Battery like the DNA40 was.
I looked it up in the manual and here is what it says.
"DNA 200 is designed for battery packs that are permanently installed into the device, or battery packs that install using an insulated, polarized connector rated for at least 25 amps. If the battery pack is installed with the polarity reversed, the fuse will blow to protect the battery pack, board and user."
I have yet to see a fuse that is fast enough to protect circuit chips but what do I know. By the way the RX200 is supposed to have reverse bat protection built into the sled. I know the "dunkle" managed to reverse his and and got a warning on the RX200. He corrected his mistake and no blown fuse and the unit is working great.
Your talking about two different mods here. Tho. They built it for dna so had to do that to protect the board. But ran low on dna boards so put joytech chip in them and called it rx200. Least thats what understand on why they started putting joytech chips in. I could be wrong on that
Well it figures I have managed to insult almost everyone today.
[deleted due to ignorance on my part]
By the way the RX200 is supposed to have reverse bat protection built into the sled or someplace. I know the "dunkle" managed to reverse his and and got a warning on the RX200. He corrected his mistake and no blown fuse and the unit is working great.
Whitaker,
Boy am I embarrassed. I have been using the RX for about a month now and it performs so well I forgot it is not a DNA200.
Whitaker,
Thank you for getting me back on the road to OZ. I can't believe I completely forgot that the RX200 is not a DNA200. Ugh!
Im glad there going good. Been thinking of getting one just for wattage mode. Have 2 dna 200 for temp. Just to have it for back up for the price
I don't think so because the box designs are different (slightly).
There is a video of Jay bo bringing the rx to a broader audience with similar properties of the DNA.
Hello Reuleaux
I'm guessing the reverse polarity connection of the DNA mod is that ring in the sled
Sent from my 0PJA2 using Tapatalk
Exactly... I don't understand why most of these mods are made to be held in the left hand when the majority of the population is right-handed. I place my mod in my cupholder when I drive so I'm always holding it in my right hand anyway.
Can't you achieve this with Jwraps? I got my black carbon fiber on the way...
Probably, yes.
What did your Jwrap cost you though? $20+shipping? That's practically half a mod. Spend another $25 and have two mods?
When I looked at them for my x cube 2 they were $18 and change + shipping.
Ended up getting a WUD wrap instead.
- Status
Similar threads
