WISMEC PRESA 40W FIRING STUCK!!!

[SamoeJoe]

[Newbies]I'am have a WISMEC PRESA 40W mod..The mod work fine before with cool design on it.But iam have a problem with that mod.The firing button stuck!How can i fix it.Everything works fine excepts the firing button not function.When i press the firing button.The button sink.!What should i do.

 

[Bonskibon]

Check the switch at the top... doesn't it have a lock switch for the fire bar? It may be on/off?

 

[SamoeJoe]

the hold button is off..the hold has stopped workin event iam on/off it..the firing switch can be used before..but the issue here is..the firing switch not function..when iam press the firing switch..it will sink??how to fix it..

 

[Smoke_too_much]

Hi SJ & welcome
You may not be able to fix it, it will depend on what is wrong with it. If you can return it then that is what I would recommend. If not then you can try to take it apart and fix it, maybe, but you had better have a back up device handy just in case because in all likelihood you will not be able to fix it.

I would expect that that device has a spring under the fire bar. Before taking it apart I would ensure there is no dirt or anything else obstructing the fire bar from rising. I would listen to see if I heard anything rattling around indicating something may have broken. I would manually lift the fire bar to see if I could tell what is holding it back and to ensure it can return to its neutral position. If none of that helps then I would consider disassembling it. Underneath that fire bar will be a small microswitch, usually an integral part of the circuit board. Unless you are a whizz at electronics the switch can't be fixed or replaced.

 

[BrotherBob]

[Newbies]I'am have a WISMEC PRESA 40W mod..The mod work fine before with cool design on it.But iam have a problem with that mod.The firing button stuck!How can i fix it.Everything works fine excepts the firing button not function.When i press the firing button.The button sink.!What should i do.

Welcome and glad you joined.

 

[stols001]

Hi, if you think you are able to dismantle it and fix it, you may want to try that. That being said, if you DO that and then want to return it to the manufacturer for refund/repair, they may well state you've voided the warranty.... I'm just imagining myself trying to take apart vape equipment and the resulting chaos.... Anything I took apart, it would be immediatly obvious to the manufacturer, but you may have better luck/skillz than me.

Probably hoping for a quick fix, which I totally get, I do, but you may have better luck trying some other alternatives first, although it may be slower.

Anna