VOOPOO VINCI MOD POD REVIEW BY BIGBOB2322

Status
Not open for further replies.

Bigbob2322

Vaping Master
ECF Veteran
Verified Member
  • Jul 27, 2014
    8,388
    23,339
    Schiller PK IL USA
    Hello folks today's review will be on the voopoo vinci mod Pod. The Vinci is in my opinion more of a AIO than a Pod and comes in many color and design choices.

    upload_2019-10-7_14-7-42.jpeg


    CONTENTS OF THE VINCI mod POD KIT

    20191003_132122 (1).jpg


    The kit comes with a manual, usb cord, warranty card ,quick airflow system guild, a gene card and 2 coils the PNP-VM1 0.3Ω 32 - 40 Watt and the PNP-R1 0.8Ω - 12 - 18 Watt. Gift card came in my review package.




    FEATURES OF THE VINCI MOD POD

    Mesh Coils

    voopoo-vinci-mod-pod-kit-9.jpg



    1500 mAH Battery

    Voopoo-Vinci-Mod-Pod-Kit.jpg


    5 to 40 watt capability



    Gene AI Chip set

    vinci5_bg.gif


    Auto or manual draw activation

    15670579496XqvY.jpeg

    1 amp charging
    0.9 color led Display

    20191003_141049.jpg

    Clear pod with easy fill tab opening

    voopoo-vinci-pod-mod-detail-6-800x800.jpg


    15670579802gxXf.jpeg


    Duel airflow system by rotating the pod 180°

    1567058720J6rU7.jpeg


    Puff curve: record usage for 2 weeks

    EDNJny1UYAAr8zL.jpg


    Puff counter

    5.5 ml pod capacity

    Auto wattage setting

    1567057958v5fXe.jpeg


    7 safety protections

    VOOPOO%20VINCI%20%20Product%20information_page-0014.jpg



    Compatible with all PNP Coils

    G_03_2_1024x1024.jpg


    SPECIFICATIONS

    voopoo-vinci-r-mod-pod-kit-3.jpg



    MENU
    Pressing the power and up button at the same time will lock the mod from from operating at all
    Pressing the power and up button at the same time will also unlock the mod
    Pressing the up and down button at the same time will put you in the puff curve

    Pressing the up and down button at the same time will also let you set the clock
    Long pressing the power button will take you out of the menu

    CHARGING THE MOD
    Charging this mod is very fast, it takes about 1 hour to fully charge the mod. ( 1 amp charging ). The charge port is located under the bottom of the mod.

    20191007_010842.jpg


    POD CONNECTION TO MOD

    The pod has 4 very strong magnets that connect it to the mod

    voopoo_vinci_40w_pod_kit_-_bottom_coil_installation.jpg


    voopoo-vinci-pod-mod-detail-9-800x800.jpg






    PROS
    Easy to operate
    1500 mAH Battery
    Auto wattage setting
    Clear Pod
    1 amp charging
    Color LED display
    Seven safety protections
    Large juice capacity
    Auto or manual operation
    Great flavor from supplied coils

    CONS
    Charge port on the bottom of the mod
    Flat mouth piece ( IT'S OK BUT I PREFER ROUND )
    Wish you could lock the wattage adjustment buttons and still vape




    MY VIEWS ON THE VINCI AFTER USING IT

    Well folks my views on the Vinci are this : This is a great AIO for a new vapor or a vapor that likes things simple, there really is no menu system except for the puff counter curve and I like it that way for this type of device. The coils are a very good plug and play flavorsome bunch that have lasted me 10 days so far with very good flavor coming from them. The battery has lasted me for pretty close to a day at 32 watts using the 0.3Ω coil. The auto / manual draw feature is nice and both styles worked fine for me although I prefer using a button to activate my device. For the person that doesn't like to build coils or use temp control this device works well. I like the auto wattage feature for 2 reasons, 1 is for the new vapor that has no clue what wattage to start at and the 2nd is so that vapor doesn't fry a new coil, remember it's just a wattage suggested from Voopoo. I like simple and simple this is along with great flavor nice looks and a system that works and works well.

    I would like to thank Thea and Voopoo for providing this for review.

    I hope this helped anyone thinking about picking up a Voopoo Vinci

    THANK YOU
    BIGBOB2322
     

    NolaMel

    ECF Guru
    ECF Veteran
    Verified Member
    Nov 17, 2012
    12,815
    80,994
    New Orleans
    Hello folks today's review will be on the Voopoo Vinci Mod Pod. The Vinci is in my opinion more of a AIO than a Pod and comes in many color and design choices.

    View attachment 843455

    CONTENTS OF THE VINCI MOD POD KIT

    View attachment 843457

    The kit comes with a manual, usb cord, warranty card ,quick airflow system guild, a gene card and 2 coils the PNP-VM1 0.3Ω 32 - 40 Watt and the PNP-R1 0.8Ω - 12 - 18 Watt. Gift card came in my review package.




    FEATURES OF THE VINCI MOD POD

    Mesh Coils

    voopoo-vinci-mod-pod-kit-9.jpg



    1500 mAH Battery

    Voopoo-Vinci-Mod-Pod-Kit.jpg


    5 to 40 watt capability



    Gene AI Chip set

    vinci5_bg.gif


    Auto or manual draw activation

    15670579496XqvY.jpeg

    1 amp charging
    0.9 color led Display

    View attachment 843471
    Clear pod with easy fill tab opening

    voopoo-vinci-pod-mod-detail-6-800x800.jpg


    15670579802gxXf.jpeg


    Duel airflow system by rotating the pod 180°

    1567058720J6rU7.jpeg


    Puff curve: record usage for 2 weeks

    EDNJny1UYAAr8zL.jpg


    Puff counter

    5.5 ml pod capacity

    Auto wattage setting

    1567057958v5fXe.jpeg


    7 safety protections

    VOOPOO%20VINCI%20%20Product%20information_page-0014.jpg



    Compatible with all PNP Coils

    G_03_2_1024x1024.jpg


    SPECIFICATIONS

    voopoo-vinci-r-mod-pod-kit-3.jpg



    MENU
    Pressing the power and up button at the same time will lock the mod from from operating at all
    Pressing the power and up button at the same time will also unlock the mod
    Pressing the up and down button at the same time will put you in the puff curve

    Pressing the up and down button at the same time will also let you set the clock
    Long pressing the power button will take you out of the menu

    CHARGING THE MOD
    Charging this mod is very fast, it takes about 1 hour to fully charge the mod. ( 1 amp charging ). The charge port is located under the bottom of the mod.

    View attachment 843467

    POD CONNECTION TO MOD

    The pod has 4 very strong magnets that connect it to the mod

    voopoo_vinci_40w_pod_kit_-_bottom_coil_installation.jpg


    voopoo-vinci-pod-mod-detail-9-800x800.jpg






    PROS
    Easy to operate
    1500 mAH Battery
    Auto wattage setting
    Clear Pod
    1 amp charging
    Color LED display
    Seven safety protections
    Large juice capacity
    Auto or manual operation
    Great flavor from supplied coils

    CONS
    Charge port on the bottom of the mod
    Flat mouth piece ( IT'S OK BUT I PREFER ROUND )
    Wish you could lock the wattage adjustment buttons and still vape




    MY VIEWS ON THE VINCI AFTER USING IT

    Well folks my views on the Vinci are this : This is a great AIO for a new vapor or a vapor that likes things simple, there really is no menu system except for the puff counter curve and I like it that way for this type of device. The coils are a very good plug and play flavorsome bunch that have lasted me 10 days so far with very good flavor coming from them. The battery has lasted me for pretty close to a day at 32 watts using the 0.3Ω coil. The auto / manual draw feature is nice and both styles worked fine for me although I prefer using a button to activate my device. For the person that doesn't like to build coils or use temp control this device works well. I like the auto wattage feature for 2 reasons, 1 is for the new vapor that has no clue what wattage to start at and the 2nd is so that vapor doesn't fry a new coil, remember it's just a wattage suggested from Voopoo. I like simple and simple this is along with great flavor nice looks and a system that works and works well.

    I would like to thank Thea and Voopoo for providing this for review.

    I hope this helped anyone thinking about picking up a Voopoo Vinci

    THANK YOU
    BIGBOB2322
    Great review! Nice to finally see something like this with a large juice capacity and visibility for juice level!
     

    Uncle

    Resting In Peace
    Supporting Member
    ECF Veteran
    Verified Member
    Jun 15, 2011
    32,527
    116,452
    Yes it works very good for the MTL coil.

    :thumbs: Yes - As usual another excellent review . . . I just got mine today (very questionable "Hill Yellow" - didn't have a choice since I won it in a contest here on ECF), haven't tried it yet though . . Really wish it came with the 1.2 oHm coil, especially since I do not sub-ohm vape - only MTL . . . Oh Well - guess I'll have to wait until I can get a few 1.2 coils (hope they are reasonable) before I give it a go . . . Just Sayin' . . . ;)


    .
     
    Last edited:

    Daniel Forsyth

    Vaping Master
    Supporting Member
    ECF Veteran
  • Mar 26, 2019
    9,272
    56,001
    45
    Victoria, Australia
    :thumbs; Yes - As usual another excellent review . . . I just got mine today (very questionable "Hill Yellow" - didn't have a choice since I won it in a contest here on ECF), haven't tried it yet though . . Really wish it came with the 1.2 oHm coil, especially since I do not sub-ohm vape - only MTL . . . Oh Well - guess I'll have to wait until I can get a few 1.2 coils (hope they are reasonable) before I give it a go . . . Just Sayin' . . . ;)


    .

    Give it a go with the other coils, you will be pleasantly surprised;)
    I thought the 0.3 ohm might be a tad low for me being a 0.7ohm puffer but I was wrong, very very smooth and clouds like you wouldn't believe:D
    Don't forget you can adjust the flow of the air!
     

    Kyle Simmons

    Full Member
    Aug 21, 2019
    31
    14
    Hello folks today's review will be on the Voopoo Vinci Mod Pod. The Vinci is in my opinion more of a AIO than a Pod and comes in many color and design choices.

    View attachment 843455

    CONTENTS OF THE VINCI MOD POD KIT

    View attachment 843457

    The kit comes with a manual, usb cord, warranty card ,quick airflow system guild, a gene card and 2 coils the PNP-VM1 0.3Ω 32 - 40 Watt and the PNP-R1 0.8Ω - 12 - 18 Watt. Gift card came in my review package.




    FEATURES OF THE VINCI MOD POD

    Mesh Coils

    voopoo-vinci-mod-pod-kit-9.jpg



    1500 mAH Battery

    Voopoo-Vinci-Mod-Pod-Kit.jpg


    5 to 40 watt capability



    Gene AI Chip set

    vinci5_bg.gif


    Auto or manual draw activation

    15670579496XqvY.jpeg

    1 amp charging
    0.9 color led Display

    View attachment 843471
    Clear pod with easy fill tab opening

    voopoo-vinci-pod-mod-detail-6-800x800.jpg


    15670579802gxXf.jpeg


    Duel airflow system by rotating the pod 180°

    1567058720J6rU7.jpeg


    Puff curve: record usage for 2 weeks

    EDNJny1UYAAr8zL.jpg


    Puff counter

    5.5 ml pod capacity

    Auto wattage setting

    1567057958v5fXe.jpeg


    7 safety protections

    VOOPOO%20VINCI%20%20Product%20information_page-0014.jpg



    Compatible with all PNP Coils

    G_03_2_1024x1024.jpg


    SPECIFICATIONS

    voopoo-vinci-r-mod-pod-kit-3.jpg



    MENU
    Pressing the power and up button at the same time will lock the mod from from operating at all
    Pressing the power and up button at the same time will also unlock the mod
    Pressing the up and down button at the same time will put you in the puff curve

    Pressing the up and down button at the same time will also let you set the clock
    Long pressing the power button will take you out of the menu

    CHARGING THE MOD
    Charging this mod is very fast, it takes about 1 hour to fully charge the mod. ( 1 amp charging ). The charge port is located under the bottom of the mod.

    View attachment 843467

    POD CONNECTION TO MOD

    The pod has 4 very strong magnets that connect it to the mod

    voopoo_vinci_40w_pod_kit_-_bottom_coil_installation.jpg


    voopoo-vinci-pod-mod-detail-9-800x800.jpg






    PROS
    Easy to operate
    1500 mAH Battery
    Auto wattage setting
    Clear Pod
    1 amp charging
    Color LED display
    Seven safety protections
    Large juice capacity
    Auto or manual operation
    Great flavor from supplied coils

    CONS
    Charge port on the bottom of the mod
    Flat mouth piece ( IT'S OK BUT I PREFER ROUND )
    Wish you could lock the wattage adjustment buttons and still vape




    MY VIEWS ON THE VINCI AFTER USING IT

    Well folks my views on the Vinci are this : This is a great AIO for a new vapor or a vapor that likes things simple, there really is no menu system except for the puff counter curve and I like it that way for this type of device. The coils are a very good plug and play flavorsome bunch that have lasted me 10 days so far with very good flavor coming from them. The battery has lasted me for pretty close to a day at 32 watts using the 0.3Ω coil. The auto / manual draw feature is nice and both styles worked fine for me although I prefer using a button to activate my device. For the person that doesn't like to build coils or use temp control this device works well. I like the auto wattage feature for 2 reasons, 1 is for the new vapor that has no clue what wattage to start at and the 2nd is so that vapor doesn't fry a new coil, remember it's just a wattage suggested from Voopoo. I like simple and simple this is along with great flavor nice looks and a system that works and works well.

    I would like to thank Thea and Voopoo for providing this for review.

    I hope this helped anyone thinking about picking up a Voopoo Vinci

    THANK YOU
    BIGBOB2322

    Hi y'all, newbie here. I just received my Vinci in the mail and I missed the chance to set the clock at the beginning and I can't figure out how to change it. Any ideas or am I missing something?? Thank you
    Kyle
     
    • Like
    Reactions: DPLongo22

    Uncle

    Resting In Peace
    Supporting Member
    ECF Veteran
    Verified Member
    Jun 15, 2011
    32,527
    116,452
    Give it a go with the other coils, you will be pleasantly surprised;)
    I thought the 0.3 ohm might be a tad low for me being a 0.7ohm puffer but I was wrong, very very smooth and clouds like you wouldn't believe:D
    Don't forget you can adjust the flow of the air!

    @Daniel Forsyth is correct try the coil out with both airflow selections, you will be surprised at how well it works.

    Hey Guys . . . Thanks for the encouragement to try one of the lower oHm coils . . . However, the one thing I try to avoid at all cost is "CLOUDS" . . . Now don't get me wrong here - I've tried sub-oHm'ing (Have a large collection of sub-oHm tanks - Big MIstake - and barely can use the .08 that comes w/GALA ) . . . Way To Much Vapor . . . Always - leads to coughing a lot, choking and finally can't breath . . . Which of course - would not be a GOOD THING, at least for "Me" . . . :lol: :lol: :lol:


    Just Sayin' . . . ;)
     

    Bigbob2322

    Vaping Master
    ECF Veteran
    Verified Member
  • Jul 27, 2014
    8,388
    23,339
    Schiller PK IL USA
    Hi y'all, newbie here. I just received my Vinci in the mail and I missed the chance to set the clock at the beginning and I can't figure out how to change it. Any ideas or am I missing something?? Thank you
    Kyle
    Hold both the up and down buttons down for a couple seconds then while still holding them press the fire button.
     
    • Like
    Reactions: DPLongo22

    gerrymi

    Vaping Master
    ECF Veteran
    Jul 12, 2013
    3,917
    14,560
    The 'Burgh, PA.

    Daniel Forsyth

    Vaping Master
    Supporting Member
    ECF Veteran
  • Mar 26, 2019
    9,272
    56,001
    45
    Victoria, Australia

    Uncle

    Resting In Peace
    Supporting Member
    ECF Veteran
    Verified Member
    Jun 15, 2011
    32,527
    116,452
    Sorry @Uncle but there is no stealth vaping with this one. :smokie:

    Not really interested in a stealth vape so much (already have a couple of mods that will provie that - when and if NEEDED) as I am in just having a decent vape without all the clouds/vapor that using a sub-oHms coil usually provides - still NEED to breath that's all . . . ;) :lol: :lol: :lol:

    Anyway - Thanks for the info . . . I might still give it a try if and/or when I can get hold of one of their 1.2 oHm coils and if doesn't work for what I want - I will pass it one to someone who NEEDS or can use this one . . . Just Sayin' . . . ;)
     
    Status
    Not open for further replies.

    Users who are viewing this thread