Hello and welcome back for yet another review. This time I will be taking a look at the vaporesso Gen SE kit that was sent to me by Sourcemore in order to provide you with a fair and honest review. The kit comes with the Gen SE mod which makes use of an external 18650 battery and has a .96” TFT display. It makes use of the Axon chip to provide a 5-80 watt output range. Also included in the kit is the iTank T tank which has a standard liquid capacity of 3ml but can be increased to 6ml with the included spare glass. It uses COREX 2.0 technology while using the same GTi coils that were used in previous versions of the iTank.
WHAT’S IN THE BOX?
1* Vaporesso GEN SE Mod
1* Vaporesso iTank T (3ml)
1* GTi 0.2Ω Mesh Coil (Pre-installed)
1* GTi 0.4Ω Mesh Coil (In box)
1* Extra Glass Tube (6ml)
2* O-ring
1* Refilling Silicone Plug
1* Type-C Cable
1* User Manual & Warranty Card
1* Safety Manual
SPECIFICATONS:
FEATURES:
1. Top airflow, leak resistance
2. Slide and top fill
3. Compatible with GTi Coil, featuring COREX 2.0 tech
4. User-friendly and vibrant interaction
5. Comfortable grip, ultra-light
6. AXON chip to boost power
7. Designed specifically for DTL vapers
8. Precise top airflow adjustment
9. 0.96 inch TFT screen
10. One-button lock, never misfired
INITIAL THOUGHTS:
The packaging for the Gen SE is what I have come to expect from Vaporesso products. I have been a longtime fan of Vaporesso products like the Xros line of products and the iTank along with the GTi coils that I use daily. The front of the box has a black background with the Vaporesso logo in green. There is a nice color picture of the actual device contained inside. The back side of the box has a list of specifications along with a contents list and company information.
Once the outer cover is slid off then the Gen SE mod can be seen with a clear plastic wrap around it, the iTank T with .2 ohm GTi coil pre-installed, spare .4 ohm GTi coil, spare bubble glass(6ml), USB-C charging cable, and user manual. There are also some spare seals included which are tucked into the spare glass.
The Gen SE mod makes use of a single external 18650 battery. I was curious as to why it wasn’t made to take a 21700 battery until I actually received it and saw that it was much smaller than I expected. The panel on one side is removed to load the battery. The panel is held on with very strong magnets and there is no movement once it is installed. The battery polarity is clearly marked and there is a battery warning on the back side of the panel.
For some reason the pictures I took make the mod look much lighter in color than it actually is. It is a very nice dark blue. One side of the mod has the Vaporesso logo etched on it while the other side has the actual Vaporesso name etched on it. This is a really sharp looking mod.
The 510 plate is centered in the top of the mod and is held in place by three torx head screws. The 510 center pin is plated and spring loaded.
The bottom of the mod has the company and product name printed on it and is secured by two black torx screws. There is a cut out on the bottom that can be seen in the picture which is where you can get a fingernail inserted to remove the side cover to install the battery.
The front of the mod has a large round fire button on top followed by the vibrant display, adjustment buttons, lock switch, and USB-C charging port. The display shows the following information.
WHAT’S IN THE BOX?
1* Vaporesso GEN SE Mod
1* Vaporesso iTank T (3ml)
1* GTi 0.2Ω Mesh Coil (Pre-installed)
1* GTi 0.4Ω Mesh Coil (In box)
1* Extra Glass Tube (6ml)
2* O-ring
1* Refilling Silicone Plug
1* Type-C Cable
1* User Manual & Warranty Card
1* Safety Manual
SPECIFICATONS:
| Brand | Vaporesso |
| Product Name | GEN SE Kit |
| Dimensions | 141.4*35.6*26mm |
| Tank Capacity | 3ml |
| Coil Resistance | GTi 0.2Ω/0.4Ω Mesh Coil |
| Battery Capacity | 1*18650 battery (not included) |
| Output Power | 5-80W |
| Charging Current | DC 5V/2A, Type-C |
| Display | 0.96 inch TFT screen |
| Filling Type | Slide and top fill |
| Package Size | 175*87*44.5mm (1pc) |
| Carton Size | 375*280*260mm (30pcs) |
| Color | Black, Storm Blue, Arctic Silver, Gradient Purple, Ice Blue, Platinum Gold, Hot Pink |
FEATURES:
1. Top airflow, leak resistance
2. Slide and top fill
3. Compatible with GTi Coil, featuring COREX 2.0 tech
4. User-friendly and vibrant interaction
5. Comfortable grip, ultra-light
6. AXON chip to boost power
7. Designed specifically for DTL vapers
8. Precise top airflow adjustment
9. 0.96 inch TFT screen
10. One-button lock, never misfired
INITIAL THOUGHTS:
The packaging for the Gen SE is what I have come to expect from Vaporesso products. I have been a longtime fan of Vaporesso products like the Xros line of products and the iTank along with the GTi coils that I use daily. The front of the box has a black background with the Vaporesso logo in green. There is a nice color picture of the actual device contained inside. The back side of the box has a list of specifications along with a contents list and company information.
Once the outer cover is slid off then the Gen SE mod can be seen with a clear plastic wrap around it, the iTank T with .2 ohm GTi coil pre-installed, spare .4 ohm GTi coil, spare bubble glass(6ml), USB-C charging cable, and user manual. There are also some spare seals included which are tucked into the spare glass.
The Gen SE mod makes use of a single external 18650 battery. I was curious as to why it wasn’t made to take a 21700 battery until I actually received it and saw that it was much smaller than I expected. The panel on one side is removed to load the battery. The panel is held on with very strong magnets and there is no movement once it is installed. The battery polarity is clearly marked and there is a battery warning on the back side of the panel.
For some reason the pictures I took make the mod look much lighter in color than it actually is. It is a very nice dark blue. One side of the mod has the Vaporesso logo etched on it while the other side has the actual Vaporesso name etched on it. This is a really sharp looking mod.
The 510 plate is centered in the top of the mod and is held in place by three torx head screws. The 510 center pin is plated and spring loaded.
The bottom of the mod has the company and product name printed on it and is secured by two black torx screws. There is a cut out on the bottom that can be seen in the picture which is where you can get a fingernail inserted to remove the side cover to install the battery.
The front of the mod has a large round fire button on top followed by the vibrant display, adjustment buttons, lock switch, and USB-C charging port. The display shows the following information.
- Battery level indicator
- Lock/ unlock symbol
- Mode of operation
- Set wattage
- Coil resistance
- Puff counter
- Theme display( 3 options)
- Press the fire button 5X to turn the device on/off
- Press the fire button 3X to enter the menu where you can choose from F(t), Pulse, Eco, VV, Themes(3 available), Setting, Smart, and Puffs.
