Hey guys, I'm finally going to be building mods to sell. my mods will primarily be made from exotic woods supplied me, or you'll also have the option of choosing your own wood to send in for me to make your custom mod. primarily hard wood mods, and stabilized wood and wood/resin blocks.
my first design I'm releasing now is a bit unique, it's a dual 18650 dna200, but I have designed it in a way to maximize space and create a mod that is pocket friendly and relatively compact, considering it's capacity. it's unlike any other bottom feeder design out there really and I have ben developing and testing it for many months now. I call it an "over and under" design, because the bottle sits horizontally, underneath the dual 18650's.
this design really makes for a nice compact bottom feeder and is the best way I've found to build a dual 18650 dna200 without making it just way too wide. it squonks every bit as good as a conventional bottom feeder, the actual juice travel path is really not much longer than a conventional setup because this design feeds from the top of the bottle rather than the bottom as all other feeders do. it feeds and drains just as well as a conventional setup. it actually feeds even better than most because it uses a very large stainless steel 2.4mm juice feed.
the battery connections are all spring loaded with solid silver contacts for very low maintenance and rock solid power delivery. the 510 is custom made by me and uses a 2.4mm stainless steel feed shaft, it's self adjusting "spring" loaded design so every atty sits flush with no adjusting, it's designed to give a solid leak proof connection and is also easily end user sevicable to give many years of trouble free use. the dna200 chip is remotely located on the opposite side of the mod to avoid ever having any juice damage to the chip
I've been using the first prototype for several months now, here are some pictures of the first prototype along side a few other mods to give you an idea of it's size. this one is made from african blackwood with matching african blackwood door and a brass faceplate. among the faceplate options are brass, brushed aluminum and wood, also with several options for the buttons. the door can of course be either matching or contrasting from a different wood. this is just the prototype and will differ slightly from the actual production design as a few slight changes and improvements to the design have been made since this prototype.
first here is a picture next to one of the tiniest mechanical bottom feeders ever. considering it has twice the amount of battery and a dna200 chip in there, it's really not that huge compared to it
and here are a few pictures next to a dna40 woodvil, again for size comparison
and a few solo shots
I'll add more to this post tomorrow I just really wanted to get this thread started.
PLEASE NOTE that I do already have a few friends from here that have already expressed interest in this mod and a few have been promised one of the first spots on the list for these mods already, so please be aware that even if you are one of the first here to say you want one, there are already a few people ahead of you. I will add the list of people who are already on the list in a few days when I am able to confirm that list
introductory price is $549 plus the actual wood block, this means that if you send in your own wood the price will be $549, if you buy a mod built from my own wood then the price will vary depending on how expensive the wood it's built from may be. some may be $549 including the wood if it's a relatively inexpensive wood, while other more exotic woods will obviously be more, depending on the wood
my first design I'm releasing now is a bit unique, it's a dual 18650 dna200, but I have designed it in a way to maximize space and create a mod that is pocket friendly and relatively compact, considering it's capacity. it's unlike any other bottom feeder design out there really and I have ben developing and testing it for many months now. I call it an "over and under" design, because the bottle sits horizontally, underneath the dual 18650's.
this design really makes for a nice compact bottom feeder and is the best way I've found to build a dual 18650 dna200 without making it just way too wide. it squonks every bit as good as a conventional bottom feeder, the actual juice travel path is really not much longer than a conventional setup because this design feeds from the top of the bottle rather than the bottom as all other feeders do. it feeds and drains just as well as a conventional setup. it actually feeds even better than most because it uses a very large stainless steel 2.4mm juice feed.
the battery connections are all spring loaded with solid silver contacts for very low maintenance and rock solid power delivery. the 510 is custom made by me and uses a 2.4mm stainless steel feed shaft, it's self adjusting "spring" loaded design so every atty sits flush with no adjusting, it's designed to give a solid leak proof connection and is also easily end user sevicable to give many years of trouble free use. the dna200 chip is remotely located on the opposite side of the mod to avoid ever having any juice damage to the chip
I've been using the first prototype for several months now, here are some pictures of the first prototype along side a few other mods to give you an idea of it's size. this one is made from african blackwood with matching african blackwood door and a brass faceplate. among the faceplate options are brass, brushed aluminum and wood, also with several options for the buttons. the door can of course be either matching or contrasting from a different wood. this is just the prototype and will differ slightly from the actual production design as a few slight changes and improvements to the design have been made since this prototype.
first here is a picture next to one of the tiniest mechanical bottom feeders ever. considering it has twice the amount of battery and a dna200 chip in there, it's really not that huge compared to it
and here are a few pictures next to a dna40 woodvil, again for size comparison
and a few solo shots
I'll add more to this post tomorrow I just really wanted to get this thread started.
PLEASE NOTE that I do already have a few friends from here that have already expressed interest in this mod and a few have been promised one of the first spots on the list for these mods already, so please be aware that even if you are one of the first here to say you want one, there are already a few people ahead of you. I will add the list of people who are already on the list in a few days when I am able to confirm that list
introductory price is $549 plus the actual wood block, this means that if you send in your own wood the price will be $549, if you buy a mod built from my own wood then the price will vary depending on how expensive the wood it's built from may be. some may be $549 including the wood if it's a relatively inexpensive wood, while other more exotic woods will obviously be more, depending on the wood