smok Vapor Chaser tank (VCT) X2, 3.8 ml Sub Ohm Dual Coil Clearomizer

The Vapor Chaser tank (VCT) X2 is a new sub ohm clearomizer by Smok. Like the VCT A1, the VCT X2 is made of stainless steel and features adjustable airflow control: easily customize your draw by turning the airflow control ring at the base of the tank. The sturdy pyrex glass tank has 3.8 ml capacity and can withstand even harsh e-liquids.
The VCT X2 uses X2-core coils which have a longer lifespan and offer great flavor and vapor production! They feature dual horizontal coils and use organic cotton. The VCT X2 is also compatible with A1-core coils.
Changing the coil head is easy: simply unscrew the base of the VCT X2, unscrew the old coil and screw in a new one. To fill the VCT X2, remove the base, tilt at a slight angle and fill with 3.8 ml of e-liquid (be careful not to get any e-liquid down the center tube.) Screw the base back on and allow a few minutes for the e-liquid to saturate the coil. Please make sure to prime a new coil by dripping a few drops of e-liquid down the center of the coil to saturate the cotton. If the coil is not properly saturated, it may burn.
The VCT X2 has a 510 connection and a removable wide bore 510 drip tip.

Features:
1 x Vapor Chaser Tank (VCT) X2 (pre-installed with 0.4 sub ohm X2-core head / 20-30W range)
1 x Extra X2-core head (0.4 sub ohm / 20-30W range)
1 x Spare Pyrex glass tube
2 x Spare o-rings
1 x User Manual
1 x Nice packing box to store the tank when not in use
PLEASE NOTE: Please only use the sub ohm (0.4 ohm) X2-core coils in the VCT X2 with devices capable of handling sub ohm coils. If using a mechanical mod, please only use High Drain batteries with a high amp limit; if using a variable power mod, please use High Drain batteries in a device capable of putting out 20W or higher. NEVER use sub ohm coils on an eGo battery or a device unequipped to support sub ohm coils. It is for your safety!
To ensure that the X2-core heads are thoroughly saturated and do not burn, Smok recommends dripping a few drops of e-liquid into the center of the coil head before using, as well as setting the tank aside for a few moments after filling with e-liquid. Please take the time to read the included User Manual for a detailed description on the proper use of this unit.
Dimensions: Height 66mm (2.5") / Diameter 22mm (0.86")
Replacement X2 coils are also available:


The Vapor Chaser tank (VCT) X2 is a new sub ohm clearomizer by Smok. Like the VCT A1, the VCT X2 is made of stainless steel and features adjustable airflow control: easily customize your draw by turning the airflow control ring at the base of the tank. The sturdy pyrex glass tank has 3.8 ml capacity and can withstand even harsh e-liquids.
The VCT X2 uses X2-core coils which have a longer lifespan and offer great flavor and vapor production! They feature dual horizontal coils and use organic cotton. The VCT X2 is also compatible with A1-core coils.
Changing the coil head is easy: simply unscrew the base of the VCT X2, unscrew the old coil and screw in a new one. To fill the VCT X2, remove the base, tilt at a slight angle and fill with 3.8 ml of e-liquid (be careful not to get any e-liquid down the center tube.) Screw the base back on and allow a few minutes for the e-liquid to saturate the coil. Please make sure to prime a new coil by dripping a few drops of e-liquid down the center of the coil to saturate the cotton. If the coil is not properly saturated, it may burn.
The VCT X2 has a 510 connection and a removable wide bore 510 drip tip.

Features:
- X2-core sub ohm dual coils
- Adjustable Airflow Control
- 510 connector
- Stainless Steel construction
- Pyrex Glass Tank for protection from harsh liquids
- Capacity is 3.8 ml
1 x Vapor Chaser Tank (VCT) X2 (pre-installed with 0.4 sub ohm X2-core head / 20-30W range)
1 x Extra X2-core head (0.4 sub ohm / 20-30W range)
1 x Spare Pyrex glass tube
2 x Spare o-rings
1 x User Manual
1 x Nice packing box to store the tank when not in use
PLEASE NOTE: Please only use the sub ohm (0.4 ohm) X2-core coils in the VCT X2 with devices capable of handling sub ohm coils. If using a mechanical mod, please only use High Drain batteries with a high amp limit; if using a variable power mod, please use High Drain batteries in a device capable of putting out 20W or higher. NEVER use sub ohm coils on an eGo battery or a device unequipped to support sub ohm coils. It is for your safety!
To ensure that the X2-core heads are thoroughly saturated and do not burn, Smok recommends dripping a few drops of e-liquid into the center of the coil head before using, as well as setting the tank aside for a few moments after filling with e-liquid. Please take the time to read the included User Manual for a detailed description on the proper use of this unit.
Dimensions: Height 66mm (2.5") / Diameter 22mm (0.86")
Replacement X2 coils are also available:
