Silent (ninja) atomizer

[Claire Grimeta]

Hello everybody. I am fairly new here. I use smok XPRO M65 and Youde goblin. I could not be more satisfied with an overal performance of my setup taste, vape and flavor-vise, but I am looking for an atomizer that does not produce hoovering noise.
I have owned some atomizers including Kayfuns, Orchids, Lemo etc... but none of them were silent (especially Lemo, which was like a vacuum cleaner).
I want to be able to vape and not be heard by a person in a room next to mine. So please do suggest what are the most silent RTAs that you've tried.

 

[RipTodd]

My Orchid is silent with the smoothest draw of all my atomizers. It is, however, a pain to fill.

 

[Claire Grimeta]

True, my Orchid V6 from FT is quite silent, but not enough. Looking for something real quiet.

 

[VaPreis]

Have you tried the Aqua V2? No RTA I've ever used is perfectly quiet, but this is the quietest in my current rotation.

The trade-off is that the airflow is not going to match the likes of the Goblin/Orchid/Lemo.

 

[Claire Grimeta]

Have you tried the Aqua V2? No RTA I've ever used is perfectly quiet, but this is the quietest in my current rotation.

The trade-off is that the airflow is not going to match the likes of the Goblin/Orchid/Lemo.

Haha, funny you would ask. I ordered one and it's actually in my local mail already (tracking), so I will be able to pick it up tomorrow morning. Looking forward to try out that Aqua V2 now even more!

 

[keepsmiling]

Spheroid on a piccolo aka 'piccoloid'...fabulous ..seamless and silent And oh so tasty.

 

[Enoch777]

Considering it's undoubtedly related to airflow you might try adjusting that or even tweaking your draw. Myself I prefer a .5Ω Twisted coil on my Stilare RDA. That's single coil setup with dual-coil airflow, so the draw is nice and loose but still kicks out thick clouds. Then again if I open it up or draw very heavy the sound levels definitely go up. Capping off one of the air holes does reduce noise so your best bet would be something with a tight flow.

Worth pondering and experimenting!

 

[Rucerius]

Haha, funny you would ask. I ordered one and it's actually in my local mail already (tracking), so I will be able to pick it up tomorrow morning. Looking forward to try out that Aqua V2 now even more!

You might have to wait until Tuesday for your Aqua, tomorrow is President's Day and all government offices are closed.

 

[Claire Grimeta]

You might have to wait until Tuesday for your Aqua, tomorrow is President's Day and all government offices are closed.

True story mate, just realized that a bit later. Tuesday it is.

Spheroid on a piccolo aka 'piccoloid'...fabulous ..seamless and silent And oh so tasty.

That is very interesting, I have actually never heard of spheroid before! But which version do you mean or recommend? As I see there's V2, V3 etc...

Considering it's undoubtedly related to airflow you might try adjusting that or even tweaking your draw. Myself I prefer a .5Ω Twisted coil on my Stilare RDA. That's single coil setup with dual-coil airflow, so the draw is nice and loose but still kicks out thick clouds. Then again if I open it up or draw very heavy the sound levels definitely go up. Capping off one of the air holes does reduce noise so your best bet would be something with a tight flow.

Worth pondering and experimenting!

Yes, but if you see my first post, I'm looking for an RTA, I don't like RDAs all that much.

 

[keepsmiling]

Currently available as far as I know is the GP Piccolo V4, and GP Spheroid V3.
here is mine in bead blasted finish



check it out
http://www.e-cigarette-forum.com/fo...p-paps-x-gp-piccolo-gp-snp-more-part-3-a.html
http://www.e-cigarette-forum.com/fo...es-vapourart-official-thread-gp-spheroid.html

 

[HauntedMyst]

Prometey v1.

 

[SissySpike]

I have a spheroid and its 100% quit ninja vape! Great flavor also but ok vapor not big clouds if thats what your after. The Kayfun V4 is pretty quit
I like it when I snap crackle and pop. like a camp fire;-) Also a cartomizer tank is quit

 

[Claire Grimeta]

Both Spheroid and Prometey are kinda pricey ($200-ish or so). Forgot to mention I am not going to pay more than 50$ for a tiny piece of steel even if Einstein himself engineered it. Looking for cheaper options.

 

[keepsmiling]

Silent and under $50? Did you look at the outlet spheroids? The spheroids are not $200. in and by themselves. Or maybe they are currently on sale. I just bought two piccolos, which is the atty and the mod and they were not that much.You might want to get approved and watch the classified ads here. Good luck with your search.

 

[keepsmiling]

I just glanced and there is actually one up right now for $60. in the classies... they do pop up from time to time.

 

[jambi]

Other than a barely detectable internal "rumbling", my Taifun GT (HCigar clone) is very smooth and quiet. No airflow noise whatsoever.

 

[alicewonderland]

i think you would have to find something with very small 1-2mm airholes if you dont want a vacuum sound, the air flow is going to be the culprit of most of the sound and if you cut airflow down you get less sound, but you also get less vapor/hotter coils/hotter atomizer etc.

 

[Cavenerd]

Both Spheroid and Prometey are kinda pricey ($200-ish or so). Forgot to mention I am not going to pay more than 50$ for a tiny piece of steel even if Einstein himself engineered it. Looking for cheaper options.

Well, if EINSTEIN himself designed it, "maybe."

I have good results with my SquapR and the clone. Just measured the sound of a wide-open (aggressive and normal) inhales.

Normal: 7dB(auth) / 8dB(clone) /13dB(K4)
Aggressive: 26dB (A) / 32dB (C) / 30dB(K4)

~20dB is a whisper / ~60dB normal conversation.

Don't know if it helps, but it was diverting for a few moments.

 

[keepsmiling]

You tested the decibels?

 

[Rucerius]

You tested the decibels?

What? You don't??