Rest in Peace > 'Kayfun Lite-Plus V2'

[Flt Simulation]

To all the mouth to lung (Tootle Puffers) here ... There was a time when the famous "kayfun Lite-Plus V2" was the gold standard when it came to single coil / higher ohm / low amp Tootle Puffing.

Now that this atomizer (to include all the Chinese clones of it) are so very hard to come by (to include spare parts), has anyone here replaced there old kayfun Lites with the new "Kayfun Lite 2019" atomizer ?

I just ordered a couple of Chinese clones of the Kayfun Lite 2019 so I can make the big changeover.

Good bye to the sweet Kayfun Lite-Plus V2
Almost 6 years vaping on this
Rest in Peace ....

 

[Rossum]

There was a time when the famous "Kayfun Lite-Plus V2" was the gold standard when it came to single coil / higher ohm / low amp Tootle Puffing.

Yes it was!

Spring of 2014:

But then I discovered BF RDAs.

 

[Katya]

Now that this atomizer (to include all the Chinese clones of it) are so very hard to come by (to include spare parts), has anyone here replaced there old Kayfun Lites with the new "Kayfun Lite 2019" atomizer ?

Nope, sorry. I have moved on to looser-draw atties.

RiP indeed.

 

[barkfunklerbunk]

 

[bnrkwest]

KF 2019 is good, but I have a stash of KFL + as well, my fav tank is still a KF

 

[Detroit Doug]

The KFL+V2 (EHPro) is still the El Presidente of my modest lineup, but I haven't chased latest & greatest for a few years. I haven't tried the KF 2019, to compare it to. I drilled out 4 of my 7 KFL's to 5/64 on all the air passages, to loosen it up just a smidge. Lots of spare parts to keep 'em going, but in almost 4 years, I haven't even needed to change an o-ring yet.

I think as long as we find our #1, no matter what it is, is what's important.

 

[Rossum]

hard to come by (to include spare parts)

What parts are you looking for? FDV has rebuild kits that include o-rings, screws, insulator blocks, etc.

 

[sorrynomore]

Just a few weeks back I decided on putting my KFL (clone)back in rotation to use with my 2 Berserkers,replacing my KF-v4 (clone).
The KFL is a Great vape for me.

 

[WorksForMe]

I used a EHPro KFL+V2 for a couple of years. Except for having to take out a screw to fill, I loved them. We thought the Vapocalypse was coming soon, so I stocked up. I still have five brand new black ones that I'm not sure I'll ever use.

 

[Flt Simulation]

Well, my two KFL's are still working fine, but since the KF 2019 came out, I thought I would just retire old KFL.

As far as parts for the old KFL, it is the clear plastic center tank section that I can't find anymore ... I did find some blue plastic center sections, but I really just wanted the clear plastic.

I did try a clone of the KF 5, but it was way way over-engineered .... too many parts, and I could not stop it from gurgling. I was told that the KF 4 was no better.

This new KF 2019 is so much like the old KFL, that I hope I am happy when it comes in the mail.

I ordered a 24mm clone made by ULTON and a 22mm clone made by YFTK

 

[evan le'garde]

I did try a clone of the KF 5, but it was way way over-engineered .... too many parts, and I could not stop it from gurgling. I was told that the KF 4 was no better.

K4 RULES.

K4 !. Point is it's built in a very robust way with Really solid component parts. I like it so much i've got ten of them in rotation. It works perfectly !.

Anyway, if you're looking for spares, and obviously there aren't any, but you could just visit Ebay and search kayfun each day until something pops up, it always does. Not a vendor on the planet sells a K4 now but if i keep an eye on the ebay listings someone sooner or later will list a second hand K4, it happens regularly.

 

[Rossum]

K4 RULES.
K4 !. Point is it's built in a very robust way with Really solid component parts.

Can you say: Way too many component parts?

 

[Flt Simulation]

Can you say: Way too many component parts?

I can say .... Nightmare !

With that .... You would think that your taking apart the valve body in an automatic transmission

 

[Katya]

Can you say: Way too many component parts?

Hey, that's my favorite Kayfun!

A tiny bit over engineered, perhaps.

 

[DPLongo22]

What parts are you looking for? FDV has rebuild kits that include o-rings, screws, insulator blocks, etc.

...or a box just off to my left.

 

[Detroit Doug]

Can you say: Way too many component parts?

 

[Detroit Doug]

Once assembled, you have your very own pocket version Pratt & Whitney JT8D Jet Engine

 

[Rossum]

Once assembled, you have your very own pocket version Pratt & Whitney JT8D Jet Engine

Oh come on, they're not that loud, are they?

 

[Detroit Doug]

Oh come on, they're not that loud, are they?

My dual air screw V2's are nice and quiet. When it starts to whistle a bit, I know one of the air passages has condensate in it, and it's time blow it out. I have some of the Fasttech single air screw bases just because they were cheap back up backups, and those do whistle.

No matter what version they may be, it's nice to have some KFs in the stash.

 

[ShowMeTwice]

Well, my two KFL's are still working fine, but since the KF 2019 came out, I thought I would just retire old KFL.

As far as parts for the old KFL, it is the clear plastic center tank section that I can't find anymore ... I did find some blue plastic center sections, but I really just wanted the clear plastic.

I did try a clone of the KF 5, but it was way way over-engineered .... too many parts, and I could not stop it from gurgling. I was told that the KF 4 was no better.

This new KF 2019 is so much like the old KFL, that I hope I am happy when it comes in the mail.

I ordered a 24mm clone made by ULTON and a 22mm clone made by YFTK

I grabbed a couple 22mm KFL19's during Roadside Vapes Labor Day sale. They're nice flavor bangers and hit hard. Great little atty. All the FT SXK spare plastic tank sections fit on the authentic fine if you are looking for spares too. Creme de Vape has a spare insulators kit and an o-ring kit with screws and the plastic grub AF screws for the KFL19.

I have many spare parts for my KFL+'s. I have some clear plastic tank sections I got from Cream de Vape a few years ago. As far as all the other spares, Rossum mentioned FDV's and he still has the spares kits for sale. My wife used to break the plastic center tank section all the time on hers. I still have a bunch of blue and purple ones too. Love my Kayfun's.