Hey builders! Yesterday morning was particularly awesome for me, because my authentic Asmodus rda was in my mailbox!
Now it may sound like I'm over-exaggerating or gushing quite extensively, but that's because I've been stalking this thing since it was a rumor! This rda seemed like it was just PERFECT for my individual vaping preferences, and now I've found out it truly is!Here's an AWESOME review of it, and a glimpse of it from my man Todd:
<font size="3"><span style="color:#008080;"><strong><u>
The two biggest and most obvious advantages for me is the fact that it's 30mm (will fit on my favorite 26650 mechanicals (the mutant, and copper 2six mod)), and has the ingenious T-post design (dual positive posts, so each coil leg has it's own spot). For someone who's developed "Vaper's O.C.D." (you know who you are
), this thing is an absolute dream come true for a few reasons:~ It will sit flush on my rarely sized 30mm 26650 mechanical mods.
~ Each wire connection has it's own individual (big 2mm!) spot, for even distribution of current/power, and the ability to easily do super neat builds.
~ It's airflow control sleeve has a small screw that will lock your airflow in place, also with a finger friendly gear-shaped top cap for easy dripping.
~ Decently large (will be drilled later hehe) adjustable airflow, with either quad, or dual coil configuration (which, again, won't move with top cap!).
~ A borderline RIDICULOUSLY deep drip-well. (I feel much better having a nice bowl under my coils, rather than worrying if it's going to leak.)
~ High quality, super-thick TANK-like design. (The negative posts are part of the deck, the center T-post is a massive thick rectangle, which is one of the key features to me, I love a deck that's solid, I've broken/spun sooo many posts because I'm rough on them, the whole atty is crazy heavy!)
~ Comes with a full set of spare post screws (which are beefy phillips heads!), and a set of new red heat-resistant O-rings as well.
Aside from all of these benefits, there's a certain "x-factor" that I get when vaping this thing, it's just 100% satisfying, and bullet-proof for my personal vaping needs. It's the first RDA other than the Tobh Atty in which I've literally had no worries, granted I've only used it for 2 days, but these past 2 days have been my absolute vaping utopia
. The only change I've made to it was drilling the airflow holes slightly wider, and it hasn't let me down, it's so darn versatile it's incredible! I can build some perfect large gauge coils, slip them in easily and with room to spare, easily tighten them down with the huge "normal sized" phillips head screws (without needing a baby screwdriver lol ), and I KNOW they won't back out (the posts aren't hollow, so it doesn't bend the wires/snap them whenever I really tighten them down, I can basically squish the leads and keep my coils perfect, one of my favorite characteristics of building with this beauty!). Now that the coils are permanently set in stone, wicking isn't a big deal because you really can't put too much cotton in this beast, I've just been wicking through the coils with really long tails, and putting a big'ol fluffy cloud beneath them, once you fill it with 3 or 4 FULL DROPPERS it's basically a "pool" of e-liquid directly below your coils keeping them saturated. Once the deck is locked down, I can then set my airflow ONCE until the next time I build, and once I have it absolutely where I want it, I can lock it in place with the little grub-screw it comes with, I can't tell you guys how satisfying this feels to me, because it locks everything exactly how I want it, even when I roughly twist off the top cap to look at my build and/or drip a few droppers, it never moves. This also comes in handy when unscrewing the atty from a mod as well, I can grab the airflow control sleeve, and twist as hard as I need to to get it off the mod! Literally the only con I can think of is the fact that I go through so much juice so easily with the Asmodus lol! Since it has really, really large airflow (that I can decrease), and a relatively reduced chamber, I can make the insane clouds that I want mostly, as well as the dense, warm flavor that comes with it. I think the thick walls also keep it much cooler than most of my atty's I've tried, which correlates with the fact that my vapes feel much warmer too. It's a great insulator, this monster is like a VAPE KILN!If you like really big vapor, and great flavor (It's REALLY good flavor by my standards, but I will admit, it's not quite as good as the Magma. (which is my favorite "flavor atty" I've tried thus far.)), coupled with a wide range of capability, and just really high quality machining, I can't recommend the Asmodus RDA more highly! It may just be perfect for "me", so take this review with a grain of salt, but if your tastes are anything like mine, I guarantee you'll absolutely LOVE IT! I haven't been this happy with a dripper since I went from the Trident to the Brass Monkee (the Trident is good, don't get me wrong, I love it too
). I got mine from here for $120, which may seem steep, but you get quite the huge chunk of well-engineered metal! (I've had 22mm that cost more!)
Asmodus 26650 RDA
ALSO, there's now a clone of it! (Kinda wish I saw that first, but I don't regret ANYTHING! I would've ended up buying the O.G. if the clone is anything like it!) I don't know anything about the clone, however it appears to be of decent quality, and it's one HELL of a price! ($19.99!) Sounds like a good deal to me, especially if you just want to try it out, although I'm like a pig in heavenly slop with this original, I'm thinking about buying a clone as my "guinea pig" for drilling patterns. Here's where to find it below!
https://88evape.com/shop/rebuildable-atomizers-tanks/asmodus-30mm-rda-clone/
What do you guys think of it? Have any of you tried the clone or authentic? I hope this helped inform someone, I can't recommend it more if your looking for a 30mm atty, truly in a class of it's own.
Vape on y'all! Have a good one!
Last edited:
, forget dripping, start pouring, get on my level! 
