Need suggestion for hard to squeeze juice bottles

[fiddleshe]

Hey all,
I have a bunch of bottles that are hard for me to squeeze. I have hand issues. I know I can buy those needle bottles that are really easy to squeeze, I have one, but that would leave me with a bunch of bottles without labels. Any suggestions? Anyway I can transfer the labels? they seem hard to remove. I know I can just write on them but I would like to know the ingredients in the future when I forget.

 

[bigrf85]

you could use different bottles and use a label maker to lavel the bottle you know whats in it and easy to remove when you put a diff liquid in it later ive been doing this since i started diy a while back

 

[Train2]

The only other thing I can think of - you COULD
a) pop the drip-tops off those stiff bottles
b) get some 1 ml or 3 ml syringes
c) use syringes to fill your stuff - just dip into the bottle, squirt into the tank/clearo/cart or whatever, then rinse the syringe

 

[liquidzoo]

Create some sort of pocket with tape (2 pieces stuck together or a large piece doubled over then taped on at both ends) and slide a hand-made label in there? I think that's what I'm going to do when I consolidate some 5 mL bottles of the same flavors for better storage.

 

[pufZeppelin]

blue painters tape and a sharpie...

I have juice bottles, tanks, boxes, and all sorts of stuff labeled all around me...

has worked very well for me (and cheap)

 

[devauto]

Either a sharpie or a label maker would do the trick, you could also cut the label off the original bottle and track it that way (glued on the new bottle, put in a binder, taped to a wall, etc.) ... Or if you are really .... retentive, just label the bottles with numbers (or flavor/manufacturer) and put all the relevant information you want to keep in a Word document/Excel spreadsheet/Database/etc.

HTH

 

[mare ze dotes]

All good suggestions. I have one more that I have tried. I used to syringe a lot, but it is easier to fill out of the bottle. I have taken my old syringe needles and just kinda used them to enlarge the dispencing hole. Gotta be careful though.

 

[fiddleshe]

My favorite juice I barely can squeeze the bottle. It takes what seems like forever to fill my tank. It hurts my hand too. I would love to get a labeller. Maybe that should be my next "vape" expense. Any suggestions on a good one?

 

[NicoHolic]

Use a small punch to enlarge the drip tips of the original bottles?

 

[pufZeppelin]

My favorite juice I barely can squeeze the bottle. It takes what seems like forever to fill my tank. It hurts my hand too. I would love to get a labeller. Maybe that should be my next "vape" expense. Any suggestions on a good one?

I know what your saying...

it is not the hole in the dropper, it is the bottle, it's 'thick-walled' (better quality)

I have a mix of these, some are very difficult , then the
next one I might grab almost collapses with same squeeze effort...


other choices:

glass and eye droppers
or always the syringe


- 30ml Amber Glass Bottle - MyFreedomSmokes.com

- Syringe with 18 Gauge Needle - My Freedom Smokes

 

[patkin]

Use or have someone else us an ice pick to enlarge the bottle dripper hole or cut off the tip a bit. Be careful if you use the ice pick... take the dripper part off the bottle and put it on a cutting board or something... actually safest to do it in a can or jar in case of a slip. Personally, I would cut it like I do super glue, calking, etc. Anyway, that way it will just run out in drips if you angle it right without having to squeeze.... that or use a glass (oh, can't think what they're called) dripper with the black rubber bulb end. You can get them at most drug or craft stores.

 

[_Lee]

nobody? really?

Had to be done.

Walgreens gives away syringes at the pharmacy; no needles of course. They are baby medicine dropper things. They work really well.

 

[pufZeppelin]

My favorite juice I barely can squeeze the bottle. It takes what seems like forever to fill my tank. It hurts my hand too.
I would love to get a labeller. Maybe that should be my next "vape" expense. Any suggestions on a good one?

- DYMO LetraTag Plus LT 100H Label Maker

 

[fiddleshe]

I do something similar to that Lee. It's a squishy gak sort of stuff in different strengths. I unfortunately I have carpal tunnel right now. So my hands are so weak I cant even use those right now. I have a few of them in different strengths. It sucks really bad because I am a fiddle/guitar/string player so it's effecting my career. Squeezing a juice bottle is the least of my problems.

I did however find a solution. I bought some easy squeezy needle bottles for a buck a piece and the guy behind the counter hid from his boss and printed me some labels on his label maker cause I asked so nicely.

 

[zoiDman]

I do something similar to that Lee. It's a squishy gak sort of stuff in different strengths. I unfortunately I have carpal tunnel right now. So my hands are so weak I cant even use those right now. I have a few of them in different strengths. It sucks really bad because I am a fiddle/guitar/string player so it's effecting my career. Squeezing a juice bottle is the least of my problems.

I did however find a solution. I bought some easy squeezy needle bottles for a buck a piece and the guy behind the counter hid from his boss and printed me some labels on his label maker cause I asked so nicely.

Sounds like I am Late in that you got some Other Bottles. But I'll throw this out there for Anyone else having Problems with hard to squeeze Bottles.

And that is if you take a Straightened Out paper Clip or a Fat Sewing Needle and Ram it down the Drip Hole of your Bottle, it will make you Bottle Much Easier to Use.

 

[mackg]

you should check out the innokin ucan. ive been using it for the past month and love the little guy.

 

[RuDawg7890]

How about something like this https://www.provape.com/ProductDetails.asp?ProductCode=blueglassbottle15 ? And I like the earlier posted idea of using blue tape & a sharpie for labeling.

 

[Emtpeters]

I use a ucan to fill everything