► Lost Vape Thelema Solo 100W Kit; Front & Back View:
The 0.96 "TFT screen is an integral part of a frame that also houses the fire button, the Mode button and the Up / Down adjustment buttons. The screen has 5 background colors, the visibility of the fonts in some occasions is not exactly optimal , all the information useful for vaping are shown except for the reading of the Volts.
The back is the one that grips and fits perfectly in the palm of the hand. This part is composed solely of the removable magnetic cover that hides the compartment / battery. The cover is covered entirely with a beautiful carbon fiber decoration.
Ultimately the parties; front & rear, are well connected to each other and favor the grip of the mod.
► Lost Vape Thelema Solo 100W Kit; Top and bottom view:
The cup is slightly offset laterally and is screwed to the mod via 3 torx screws. The plate remains slightly raised to prevent scratching the mod during the screwing / unscrewing phase of the tanks. The thread of the thread is very smooth and inside we find a spring loaded floating pin. On the Thelema it is possible to install tanks with a diameter up to 28.5mm without protrusions.
On the bottom of the Mod there are two Torx screws and the white identifying writings with logo and brand.
► Lost Vape Thelema Solo 100W Kit; Battery compartment:
The cover is appreciably made of sturdy metal and is equipped on the inside with two magnets one at the top and one at the bottom, the two magnets are opposed to those present in the battery compartment integrated into the Thelema Solo 100W frame. The compartment has no cell extraction strap as its conformation allows you to easily extract the battery only with the aid of your fingers. The "+" and "-" polarities are clearly marked and the "+" pin is spring loaded for easy removal and insertion of the cell. Included in the kit is a plastic material reduction that allows you to use a "small" 18650 battery.
► Lost Vape UB Pro Pod Tank:
This vaporizer can be dismantled into 4 pieces, the 810 type Drip-tip has two sealing rings, the dark-colored PCTG cartridge contains up to 5.5ml of e-liquid, the metal lower part (Deck) contains the slots of the 'AFC and is threaded directly to the cartridge for a better tightening than the classic magnetic systems that are found on the market.
Why did Lost Vape technicians choose a solid screw fastening between the Pod / PCTG parts and the steel AFC base? This could appear inconvenient when you have to change the coil compared to a magnetic system, however the system designed by Lost Vape offers several advantages; such as refilling from above without having to detach the tank to fill it. In addition, the screwing system compared to the magnetic one reduces air drafts to a minimum, resulting in much more precise AFC adjustment. The UB Pro Pod Tank's AFC system is designed with a triple air intake to maximize airflow over the coil. The coils are inserted under pressure from below.
► UB Pro Coil Range:
There are currently two types of UB Pro Mesh-Coils available and they are:
• 0.15Ω UB Pro P1 NI80 Mesh-Coil with 70-90W Range
• Mesh-Coil UB P3 from 0.3Ω Range 60-70W which can be used with temperature control in a range between 260-290 ° C and 500-550 ° F.
• UB Pro RBA Deck Resistance Range: 0.15-3.0Ω can be purchased separately for "do it yourself" lovers.
* The various applications of Coils UB PRO and RBA UB PRO Kit can be viewed here:
UB PRO COILS | Lost Vape
► The RBA UB Pro Kit consists of:
• 1 Postless RBA Deck
• 1 Screwable Chimney
• 1 510 adapter
• 2 Cotton laces
• 2 Ø3mm 0.3Ω Complex Coils
• 2 replacement O'ring
• 4 tightening screws.
► Lost Vape Thelema Solo 100W; Operation Guide:
• Power on / off: Press the fire button 5 times in a row.
• Lock / Unlock: Press the (+) and (-) keys at the same time
• After 20 seconds of inactivity, the Stand-By mode is activated
•• Simplified navigation:
With the mod Unlocked, press the (+) and (-) keys to scroll through the options. To select, press the central Mode button, to confirm your choice, press the fire button.
With Power selected, press the Mode button to change mode, with the (+) and (-) buttons choose between (POWER, TC-SS904, TC-SS316, TC-TI, TC-NI, VPC, VOLTAGE, BYPASS ).
•• Temperature control mode:
The temperature and wattage can be adjusted under SS904, SS316, TI.
The temperature value can be changed between 100 ° C and 315 ° C, 200 ° F and 600 ° F, the power can be set between 5.0-100 W.
* SS904 mode is specially designed for UB Pro P3 coil which is built with SS904 wire.
•• VPC mode:
VPC mode is a custom curve output mode. The value of the output power can be changed every 0.5 seconds in a range of 4 seconds from 5 to 100W.
•• Boost function:
Thelema 100W supports Boost functionality in power mode to increase / decrease the pre-hit (Soft, Norm, Hard).
•• Bypass:
It allows you to vape automatically, the power decreases as the battery drops, with the Bypass function activated it is not possible to use the "Boost" function.
•• Puff time display and puff count reset:
1) The Puff Time is displayed for 2 seconds after activation (fire).
2) When the Puff count is highlighted press the Select button to reset it.
•• Setting:
Setting is the last item on the Display and allows you to access various settings (Atomizer, Screen, Color, User, Reset, About, Back).
• Atomizer: Allows you to view the settings of the atomizer in the various modes, to measure the resistance (TC) and to make other changes.
• Screen: You can adjust screen brightness, press the (+) and (-) buttons.
• Color: You can select six different background colors (Light Blue, Yellow, White, Red, Green, Blue).
• User: In this screen you can change Mode, Resistance, Power, Voltage, Boost Level or Temperature and save 3 different Pre-Sets.
• Reset: To reset all settings to factory defaults select (YES) and confirm.
• About: Displays the Lost Vape logo and the installed software version.
• BacK: To return to the main interface.
•• Charging:
The device has a built-in DC 5V USB type port, powered by a Type-C cable.
While charging the battery icon will start to animate, once the charge is complete it stops. (Battery Voltage 4.18V).
•• Protections and warnings:
• Battery Low
• Check Atomizer
• Short circuit
• Too Hot: the device turns off when the indoor temperature is higher than 85 ° C. Until the temperature returns to 65 ° C.
• Cut Off: The output is automatically cut off and the screen shows "Over 10s" when the single Puff reaches 10s of continuous activation.
► Lost Vape Thelema Solo 100W Kit; Final conclusions and vaping test:
I really liked the Mod and I honestly think that it is difficult to find better among the entry-level kits. However Lost Vape Thelema Solo 100W Kit is offered at a popular price particularly affordable for the excellent quality / price ratio. The DC-DC storage converter with an output voltage higher than the input allows the Step-Up with semi-discharged battery even with atomizers equipped with MTL resistors. The new Quest 100W Chipset is full of options, reliable and widely adjustable. The absence of the TCR function is fully justifiable as this chip provides more stable performance than the average of Chinese circuits with a powerful delivery and adjustable on 3 boost levels. Also in the menu for TC you can quickly set the wattage you want, the temperature and power can be carefully selected in the SS / TI / NI modes, saved and overwritten in three different user presets. The management of settings with the convenient "mode" button are ok and the 21700 battery life are really good even at 50-60W.
Thanks to its effectiveness, the 26mm UB PRO tank best interprets the type of circular design tanks available on the market. The 810 drip-tip is replaceable, offers a comfortable top refill and RDL / DL performance is excellently managed by a 3-way AFC system that rotates on a steel ferrule.
• Mesh-Coil UB Pro P1 NI80 from 0.15Ω Range 70-90W:
Given the great power that can be reached by this coil, which approaches the maximum limit of the Mod (100W), I recommend using the Mod only with a 21700 cell and a Max 80W of power in order not to incur a rapid end of-charge of the battery. At 70W (minimum range of the coil), the responsiveness to the Fire key is immediate and the triple AFC is usable at 100%. Logically at 80W you get a higher yield and a higher vapor emission. However at 70W the coil feeds well and shows no supercharging or leaking. The Puff is always very quiet. By slightly closed the AFC ring, the aromatic yield increases hand in hand with the heat.
• Mesh-Coil UB Pro SS904 from 0.3Ω Range 60-70W:
This very interesting Mesh-Coil can be used indifferently in VW or in TC / SS904 with settings between 260-290 ° C and 500-550 ° F.
The first impressions beyond the mode used are those of a balanced coil with good overall performance.
With this Coil the power delivery is certainly more abrupt in VW mode, in TC-mode you feel a greater linearity of the Puff, moreover the management of the TC certainly also guarantees a longer duration of the cotton that is in direct contact with the element. heating.
• RBA UB Pro Postless Style:
I was happy with the supplied Ø3mm coil which turns out to be 0.3Ω.
I started at 30W, and since the liquid is good absorbed by cotton, I ended up using it between 34 and 37W without any inconvenience.
The medium / low consumption and the 5.5ml of liquid contained in the cartridge allow long vaping sessions. In the build-coil phase on the deck, those with poor eyesight may encounter some difficulties with the tightening screws which are small in size. The Ø2mm under-coil hole does not allow excessive air passage and it seems to me to be right for RDL. Surely by turning the AFC ring you will find your ideal Puff.
► Lost Vape Thelema Solo 100W Kit; PRO:
• Superior quality Lost Vape construction
• Ergonomic and lightweight mod
• Wide range of combinations of materials and colors for the choice of the Kit
• 5 Vaping modes: VPC, Bypass, Watt, Volt, TC (SS316 / Ti / Ni)
• 3 power steps (Soft, Norm Hard)
• 3 additional user memories
• Type-C charging
• AFC adjustable with steel ring
• Convenient side trim at the top
• Coil UB Pro 0.3ohm for TC
• RBA UB Pro available for purchase separately
• Replaceable 810 Drip Tip
• Convenient price
► Lost Vape Thelema Solo 100W Kit; Tips:
• The TCR function is missing
Thanks for reading.
Thanks to Lost Vape for sending me the sample for review.
Thelema Solo 100W Kit – Lost Vape
