Let's see your Mini Volt set-up

[BigLiquid530]

I have been back and forth on what I should buy to complete my setup on my COV Mini Volt. Was thinking Goblin Mini, or Vicious Ant Cyclone, but wasn't sure. Going to build between 0.8 to 1.2 ohm build. Single coil so I don't go threw the battery so fast. Plus I want it to look good also


So let's see some setups people....

 

[defdock]

Moddified kayfun monster with "slam cap"

Goblin Nano - didn't come with single coil adapter, unlike the taller "mini". The adapter works for both models, just only comes with the mini.

Orchid rta with kf4 chamber and bell cap

 

[Susan~S]

I have been able to keep myself from buying one of these "itty bitty" mods, thus far.

And now you start a thread where EVERYONE posts their wonderful new new setups.
How do you expect me to continue to RESIST!

BTW, any word on them coming out with different colors!

 

[BigLiquid530]

Moddified kayfun monster with "slam cap"

Goblin Nano - didn't come with single coil adapter, unlike the taller "mini". The adapter works for both models, just only comes with the mini.

Orchid rta with kf4 chamber and bell cap

Where did you get the goblin nano? And what ohm do you usally run at? I love my Kayfuns but the just look to damn big on it.

 

[BigLiquid530]

I have been able to keep myself from buying one of these "itty bitty" mods, thus far.

And now you start a thread where EVERYONE posts their wonderful new new setups.
How do you expect me to continue to RESIST!

BTW, any word on them coming out with different colors!

I'm going to order a wrap for mine

 

[BigLiquid530]

I just needed to upgrade all my mods and I was tired of carrying my Sigeli 150 to work so got rid of all my old stuff and upgraded

 

[defdock]

I have been able to keep myself from buying one of these "itty bitty" mods, thus far.

And now you start a thread where EVERYONE posts their wonderful new new setups.
How do you expect me to continue to RESIST!

BTW, any word on them coming out with different colors!

Black/carbon fiber is the only color they released them in, but there are tons of sellers already with wraps for them. Almost tempted to replace the carbon fiber on mine with a wood print.

@BigLiquid530 the nano I got from fasttech. Right now it's at 0.67ohms with 28g kanthal, I want to rebuild it slightly higher. Would be nice if I had the single coil adapter :/

 

[BigLiquid530]

Black/carbon fiber is the only color they released them in, but there are tons of sellers already with wraps for them. Almost tempted to replace the carbon fiber on mine with a wood print.

@BigLiquid530 the nano I got from fasttech. Right now it's at 0.67ohms with 28g kanthal, I want to rebuild it slightly higher. Would be nice if I had the single coil adapter :/

Do they sell the whole set-up or is like base, tank, ect

 

[defdock]

The goblin nano is sold as a full tank, with spare cap seals, a few screws, fill screw oring, 2 coils, and the magic blue screwdriver. Oh and a "mod ring" to protect your mod from scratches(but not condensation).

 

[BigLiquid530]

The goblin nano is sold as a full tank, with spare cap seals, a few screws, fill screw oring, 2 coils, and the magic blue screwdriver. Oh and a "mod ring" to protect your mod from scratches(but not condensation).

Does it vape pretty good any issues with the tank. $9 seems like a pretty good deal

 

[Arnold Ziffle]

I'm looking at getting a smaller tootle rta. funny when a kayfun nano looks too big.

 

[BigLiquid530]

I'm looking at getting a smaller tootle rta. funny when a kayfun nano looks too big.

That's the problem im having also my kayfuns look too big lol

I need to also get a single coil dripper for it also

 

[defdock]

Does it vape pretty good any issues with the tank. $9 seems like a pretty good deal

Vapes as well as I imagined. No issues with the tank besides the known downsides of the goblin series, condensation buildup on top the mod due to bottom airflow and the stupid flathead screw for filling(prefer philips).

 

[BigLiquid530]

Yeah I hate the flat head screws.

Just rebuilt 3 of my kayfuns to 1.0 ohm and its actually not a bad vape. Been awhile since I vaped that high

 

[BreSha6869]

Thanks guys.... I ordered a Mini Volt a few days ago and didn't think about a tiny tank.

Initially it will have to be a Subtank Nano or Nautilus Mini. Although my Super Tank Minis have a pretty low profile.

Question.... what are some good SMALL RTA options/suggestions for the Mini Volt? I have small drippers, but not interested in using those with the Mini Volt.

 

[inswva]

 

[BreSha6869]

Bet that works great though....

Not too terrible to carry around the Mini Volt and STM I would imagine. I don't want a dripper as I will be out and about for 4 days in Nashville in a few weeks and want small, but proven not to leak. Kanger and Aspire haven't let me down yet.

 

[inswva]

Bet that works great though....

Not too terrible to carry around the Mini Volt and STM I would imagine. I don't want a dripper as I will be out and about for 4 days in Nashville in a few weeks and want small, but proven not to leak. Kanger and Aspire haven't let me down yet.

Works very well, indeed. It's just hilarious how small the Mini Volt is.

 

[Mike Geaney]

Toptank nano next to 60 ml bottle of Wakonda.

 

[BigLiquid530]

So today I used my Mini Volt for the first time and the battery life was excellent. Lasted me my 40 min commute, 8 hour shift, and then my 40 min commute home and still could have vaped more. Very pleased with this little ....

Might have to purchase the new kayfun v3 Mini that comes out this coming Saturday. What is a good single coil dripper?