Introducing the Innokin iTaste VTR Variable Wattage/Voltage iClear30S Kit - Stainless & Jungle Camo Green

[dannoman]

innokin iTaste VTR Variable iClear30S Kit - Stainless & Jungle Camo Green

The Innokin iTaste VTR is a solid variable wattage and voltage vaping device with detailed finish. It features an easy to use rotational wheel and had a protective skeleton to hold the tank inside. The voltage and wattage can be adjusted with the rotational wheel; the screen displays voltage or wattage and offers intuitive control over settings leading to more accurate performance.

Tanks larger than 19mm wide must use the supplied extension piece to work on the VTR. This extension piece generally acts as an adapter for most any 510 connection.

The iTaste VTR uses replaceable non-protected 18650 batteries (not included).

Features:

• Variable Voltage: 3.0 to 6.0 volts in .1 volt increments
• Variable Wattage: 3.0 to 15.0 W in .5 watt increments
• Short Circuit Protection
• RMS (root mean square) voltage algorithm
• Reverse Battery Protection Circuit
• Resistive Load Detection (Ohms meter)
• ON/OFF battery switch
• LED Battery Power Display
• Low Voltage Warning
• Overtime Vaping Warning (10 second switch cutoff)
• Battery safety protection (Vent holes)
• High compatibility 510/eGo connector (on extension piece, VTR base is 510 only)
• Built-in 3 digit display (Ohms meter, Volts /Watts, Atomizer voltage output) Replaceable Battery: iTaste VTR supports 18650 batteries no longer than 65mm long (unprotected)

Included in Your Innokin iTaste VTR kit:

• iTaste VTR mod
• Extension tube for using larger than 19mm wide tanks. This tube is eGo Threaded and has a removable protective ring which can be removed for cleaning or extra large eGo cartos or tanks.
• iClear30S polycarbonate dual coil clearomizer tank and one atomizer coil (installed)
• Instruction manual in five langauages.
• Hard Sided and clasped carrying case

VTR kit does NOT include batteries or a charger. Most protected lithium-ion batteries will NOT work in the VTR because they are longer than 65mm. We rfecommend our eFest or Panasonic IMR 18650 (unprotected as protected has an extra chip in it and it won't fit the tube!)

Innokin iTaste VTR : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[woody55]

Oh Wow! What a slick looking Rig! That has "Show Me Off" written all over it! Innokin has done it again!

 

[yiddleboge6]

I want !! I want !! I want !! I want !!

 

[oldbikeguy]

So do I So do I So Do I

 

[keelalagirl55]

I want !! I want !! I want !! I want !!

So do I So do I So Do I

What they ^^^^^^^^^^ said!!!

 

[TexasTanker19kilo20]

Got to look at one today at a B&M in Killeen, TX. Saw the PB review, it will be my next PV.

 

[badkolo]

what a hott looking device , awesome with aurora

 

[dannoman]

​

 

[MoonLit_Water]

I have had one of these for three days now, it rocks.

 

[TexasTanker19kilo20]

I have had one of these for three days now, it rocks.

How does it compare to a MVP 2.0? If you happen to own a MVP.

 

[MoonLit_Water]

How does it compare to a MVP 2.0? If you happen to own a MVP.

Nope sorry I don''t have a MVP2.

 

[TexasTanker19kilo20]

Cool was just wondering, on my list of next mod, the #1 spot is shared between the VTR and MVP 2.0

The monies situation right now for me is slim, since I retired from military, so buying a new device is a slow process that includes Pros/Cons and peoples personal reviews.

 

[djtonyb]

I've had mine for about three weeks now... it's a lot heavier than the MVP2. I've been using it with the Davide, and I absolutely love it! The performance is similar to the MVP2, but I think the VTR has better airflow. If you do get one and plan on using the Protank2 or Davide in it, I suggest getting a long drip tip... those tanks are shorter than the i30S that comes with it. With the Protank2 and the Davide drip tip, the mod is very close to your face (I kept hitting my nose with the VTR).

 

[woody55]

Thanks djtonyb, that is very good info on the VTR! Can't wait to get my hands on one!

 

[djtonyb]

Thanks djtonyb, that is very good info on the VTR! Can't wait to get my hands on one!

It's a very solid feeling mod, it makes the MVP feel like a toy... Also, the button is perfect... I find the MVP2's button a little stiffer than I would like it. It just feels like a serious piece of equipment. The chrome finished one will almost certainly need a wrap... the fingerprints are really bad on it. I love the cage for the tank, seeing as I have broken a Protank off on both my MVP and my Tesla.

 

[djtonyb]

Also, the extension tube has an eGo connector on it... the VTR is 510 threaded, but the adapter has eGo and 510 threading. The top collar screws off so you have full access to the eGo connector, which makes the VTR into a very heavy MVP style mod.

 

[Fullknight]

Also, the extension tube has an eGo connector on it... the VTR is 510 threaded, but the adapter has eGo and 510 threading. The top collar screws off so you have full access to the eGo connector, which makes the VTR into a very heavy MVP style mod.

Sorry was half asleep and didn't pay attention to what I was doing.

 

[rdsok]

Fullknight...

This is the Gotvapes forum area... and as such it isn't kosher to post a link to another competitor's website... you may want to edit that out. Besides... Gotvapes carries 510 to eGo adapters here eGo Adapter 510 - Outside Threaded for eGo Cone [gotvapes-EGO510adapter] - $4.25 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more

 

[woody55]

Dang, so much to choose from!