Innokin iTaste vv/vw ??

Status
Not open for further replies.

Coersum

Senior Member
ECF Veteran
Verified Member
Sep 25, 2010
164
56
Beaver Dam WI
I am guessing this is new since it says "new" hehe, but wondering how new... is it available yet ? This thing seems to do everything I wanted a battery to do, Small, compact, VW, ohm checker etc!!

It only goes up to 5v but that's enough for me, the VW in such a small form factor + ohm checker makes the squarish look not matter at all :D I tried to look for it but every time I find a V3, it says only VV and not VW like on StormyVaporCellar where it says "This is not the VV/VW Version"

Also found it on ecigg.org but it seems even though they are posting the VW description, people are getting the VV only version.

iTaste VV V3.0 Express Kit (NEW)

1-120R01P320.jpg

The iTaste VV V3.0 is a microprocessor controlled variable-voltage/variable-wattage (VV/VW) personal vaporizer that lets you adjust the voltage or wattage in seconds with just a few button presses. It's quick and easy!

Specifications:
Size: 15.1*15.1*99mm
Operating Voltage: 3.3V-5.0V
Operating Wattage: 6.0W-11.0W
Maximum Current Output: 3.5 ampere
Materials: copper tube /aluminium tube + zinc alloy

Main Features:

Variable Voltage:
voltage can be adjusted from 3.3 – 5.0 volts in .1 volt increments.

Variable Wattage:
Wattage can be adjusted from 6.0 – 11.0 W in .5 watts increments.

Ohms meter :
Resistive Load Detection.

Puff Counter:
The puff counter will record how many puffs you have taken. The records will be cleared when the device is turned off.

Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection helps protect the iTaste VV against faulty atomizers.

Over-Discharge Protection:
The iTaste VV monitors the battery voltage and will automatically turn off when the battery is discharged.

LED Battery Indicator:
The iTaste VV battery utilizes an advanced capacity display via green, yellow and red LED lights. Users will know the battery’s capacity via the color of the LED Button.
The LED lights will show green, yellow or red to indicate full battery life, half capacity or charging needed.


Superior Battery Life:
The iTaste VV e-cigarette features a built-in 800 mAh polymer Li-Ion rechargeable battery.

510 Threaded:
The iTaste VV is threaded to accept 510 accessories, including the iClear10,iClear16 and iClear30 clearomizers.


ON/OFF Battery Switch:
Quickly clicking three times will power the device on or off. Once the device is on, holding down the button will activate the battery. This safety feature prevents the atomizer from turning on while it's in your pocket or bag, as well as inadvertent settings changes.

10-Second Cutoff:
If the button is held down for 10 seconds or longer, the iTaste VV will shut itself off until the button is released.


Passthrough:
The iTaste VV is charged through a Micro USB Port. You can recharge it with any standard MicroUSB cable. It can also work as a pass-through device for simultaneous vaping and charging.

Settings Retention:
The device remembers the last voltage or wattage used when switching batteries.

Display Information:
The bright display shows resistance (ohms), voltage, wattage, atomizer voltage output, puff count, and last-used settings.
 
Last edited:

FishinMT

Senior Member
Verified Member
Jan 15, 2013
71
111
The Treasure State
I find that my MVP travels really, really well.

x2, my MVP goes everywhere.

The only action my Twist sees anymore is when I'm working or fishing cause I won't mind too much if it goes for a swim in the river! And if it were I would probably get a second MVP, with a life jacket.
 

tnt56

Vaping Master
ECF Veteran
Verified Member
Aug 30, 2012
6,592
11,481
68
Tripple digits half way to home
I'd give up the VW feature just to have a darn resistance checker. I don't care how many puffs I take. I want to know the resistance of the attached device. BTW I've got an Itaste vv and also a MVP. MVP goes just about everywhere my Provari and mechanicals do. (yea I carry a lot of different mods.):D
 

kiwivap

Vaping Master
ECF Veteran
Verified Member
Jul 14, 2012
6,000
4,563
New Zealand
One would hope that a VW device would have the function to display the resisitance, but after seeing the quirkiness of various devices coming from China, nothing is guaranteed... :p

They usually do have resistance check and display. Its standard. The MVP didn't when it came out - it was noted because its unusual for a mod like that not to have it. I think the current MVPs do have it.
 
Status
Not open for further replies.

Users who are viewing this thread