I am a coil inventor. I have many new coils I'm currently perfecting, and my rda's sizes just don't cut it for some coils. Is there any rda that is for say square with the posts being on the far right or left side? Therefor becoming capable of large single coil builds? If there is, please inform me on where to purchase it, and if not then I guess I'm going to become a rda inventor as wellXD
RDA Huge rda
- Thread starter thekill
- Start date
- th_trl_thread_readers 0
- Status
biggest dual coiler - ALLIANCE FAT BOY (PRE-ORDER) | Vapergate
Other wise twisted messes, The 13 heavens\hells and velocity are able to take some monster builds.
I believe the twisted can go single air hole but not sure
Velocity would maybe be a good candidate.
The Hobo 3.1 is a 2 poster RDA where you can move the positive post around but is more aimed towards flavor and is small on the inside.
Other wise twisted messes, The 13 heavens\hells and velocity are able to take some monster builds.
I believe the twisted can go single air hole but not sure
Velocity would maybe be a good candidate.
The Hobo 3.1 is a 2 poster RDA where you can move the positive post around but is more aimed towards flavor and is small on the inside.
Last edited:
Can't really tell what your asking but you may want to have a look at the Phenotype. Dual post with massive post holes and crazy airflow. I have some fused claptons with 25g core wrapped in 28g and they fit comfortably. There's also the 50mm alliance rda you could look into to.
Anarchist x Aria Phenotype-L RDA – Local Vape- Costa Mesa Vape Shop and Online Vape Shop
ALLIANCE FAT BOY (PRE-ORDER) | Vapergate
Anarchist x Aria Phenotype-L RDA – Local Vape- Costa Mesa Vape Shop and Online Vape Shop
ALLIANCE FAT BOY (PRE-ORDER) | Vapergate
I know exactly what you mean, the best I could find before the Twisted Messes/7Heavens was the El diablo with a Mutation x deck with drilled post holes. And with the AFC on the outside, at least putting the cap on is never a problem unless your literally over the deck, which is my problem now. I'm wondering if the Twisted Messes or 7 Heavens are even gonna really add anymore room than my current setup, a 22m RDA is a 22m RDA. Probably just gonna have to go bigger and hang over the sides of my IPV4 a bit eh?
Idc too much anymore about aesthetics anymore, I'm now simply concerned about performance. And right?? A 22mm is a 22mm. I may have halve a centimeter more room to work with due to the top cap differing, but besides that nothing will really change. I decided to go with a velocity, bc with that I can at lest build huge vertical coils, and with a bit of work make use of the full length of the rda. Thank u guys. I also have the fathom 50mm ordered vape on my friends-message me if u want to see some of my coils or learn how to make them. I have all differnt kinds of builds for everyone's preference.
My last build was a triple parallel staged heated coil. Two 28g strands of kanthal with a piece of quad clockwise twisted 32g kanthal counter clockwise rapped around 22g nichrome. .... chucks flavor and vapor. So big I had to invert it in the dark horse
Check out the Big Buddha RDA by Zephyr. A 26650 Rda with 4 posts, huge holes in the posts and lots of room to build.
I found mine on ebay.
Can I use a 26650 atty on an 18650 powered mod? Such as a snow wolf?
Yeah,they are pretty much the same,only difference being size,instead of 22mm the 26650 versions are 28-30mm.
28mm/ 26650 zephyr buddah lofs of room i got dual 24 g parrallels about 12 wraps each i think its reading .25 right now and it pours vapor and screams flavor lol
CATEMIZER! It's pretty much a 30mm doge with slightly different airflow. Huge post holes but only 3 of them.
Yes it is gigantic. There's enough room to do "in between the posts" builds like on 2 post atties.
If you're looking for an 18650 sized atty, with lots of build room and big post holes, you can't go wrong with a Twisted Messes atty. I have zero problem fitting and setting my biggest coils inside of it without worrying about coils touching the inner chamber. I was able to fit this monster in it, no problem. It's a stitched fused 24g alien, 2 strands of 24g for the core 38g or 40g - I forgot - alien, with a 32g stitch.
Also, before I got the Twisted Messes, I could not fit these coils into anything I owned.
And I'm an atty junkie, I have a Kennedy 24, Petri, TM, Hobo v3.1, mutation X v3/v4, doge v2 (a doge v2s may be good for you, it has thinner tolerances on the side walls and on the caps), etc. I own too many atty's.
Yes it is gigantic. There's enough room to do "in between the posts" builds like on 2 post atties.
If you're looking for an 18650 sized atty, with lots of build room and big post holes, you can't go wrong with a Twisted Messes atty. I have zero problem fitting and setting my biggest coils inside of it without worrying about coils touching the inner chamber. I was able to fit this monster in it, no problem. It's a stitched fused 24g alien, 2 strands of 24g for the core 38g or 40g - I forgot - alien, with a 32g stitch.
Also, before I got the Twisted Messes, I could not fit these coils into anything I owned.
- Status
