Help with First Nugget Artery with 49er kit

[PeaceOnEarth]

Please help, I’ve have only used ego battery and a kanger pro tank. This is my first of this kind of ecigg. I’m only using the parts that it came with.

Not sure what is called, a variable voltage or a variable wattage? Is it a mod?

I have done some research, but Im not certain how to set it.

It has .53 ohms. So far I have the watts at 25.0 and the temp at 420 Fahrenheit

But, Im not getting that great cloud that I see on you tube videos :/

What can I set the Watts to?

Are the watts the same as a voltage?

 

[daviedog]

You may only use nichol, titanium, or SS in temp control.
Please read owners manual or go to manufactures website before continuing.
.53 ohms is too high a resistance for TC..

 

[PeaceOnEarth]

it is what came in the box?

Authentic Artery Nugget 50W 1000mAh TC VV VW Mod + Artery 49er tank Gold Rush Kit - Black, Stainless Steel, 5~50W, 0.5~8V, 2ml
artery 49er nugget - Google Search

 

[Topwater Elvis]

It comes with a .5Ω kanthal & .2Ω ni200 replacement heads (coils).
The .5Ω kanthal should only be used in watt/power mode, the .2Ω ni (nickle) should only be used in ni/temp control mode.
If it is reading .53Ω, the replaceable head (coil) you have installed now is the kanthal, use watt/power mode only.
Set the power device to watt/power mode, start off at a low setting like 15-18ish watts, increase power until you find what you like.

 

[MagicJosh]

You need yourself a 100 or above wattage mod and a nice good old fashion RDA! You will be blessing the mood with clouds!

 

[PeaceOnEarth]

Thank you. The .5Ω kanthal is working better.

 

[PeaceOnEarth]

I'm such a newbie, only been using ego battery for a few years...
Also got a Vaporesso and the tank it came with in the box.

Authentic Vaporesso Target Pro TC VW Kit - White, Zinc Alloy, 5~75W, 1 x 18650, 2.5ml, 22mm Diameter

Is that an RDA? I'll have to tackle the tanks after I figure out the new battery.

Any suggestions on how to set up the Vaporesso for the first time is appreciated.

 

[Topwater Elvis]

You didn't say which vaporesso 'kit' you have.
Try reading the manual for your model ---> Download manuals for vapes | Vaporesso
RDA = rebuildable drip atomizer.
Sounds like you're using replaceable atomizer head type delivery devices (tanks). Stick with those until you get the hang of them.

 

[PeaceOnEarth]

Authentic Vaporesso Target Pro 75W TC VW APV Box Mod Kit (Black)
Target Pro 75W TC/VW, Black / SKU: 4985103 (fasttech)
down loaded the target pro user manual

what is the difference in the .6Ω & .5, are they used the same way: use watt/power mode only.

 

[Topwater Elvis]

The .6Ω & .5Ω are SS, can be used in watt or SS/temp control mode.
They don't say what the difference is other than the .1Ω.
Try both to find out which one you like best.

Prime the head, fill tank, let sit for a few minutes, take a few unpowered primer puffs, start off at a low power or temp setting & work your way up until you find what you like.

Be sure to use a quality battery with a sufficient CDR to power your target pro.

 

[PeaceOnEarth]

Starting over with the nugget.. let it soak, but I didn't prime the first .5Ω kanthal so I tossed it. (wasn't vaping very well)
I did prime the .8Ω, SS which is the other coil that it came with and let it soak. The ohms went up to.9, then .99, now at 1.3. Is that ok? i thought it would stay at a certain ohm? I got a good vape on power at 25 watts
Going to start with the watt/power mode and slowly work my way up.

I see the option for ssTemp, But when in temp mode, what do I set the voltage to?

 

[PeaceOnEarth]

Update: Success! Little Nugget is doing a fine job.., big clouds and not spitting or gurgling with a little tinkering.
Thank you Topwater Elvis for your amazing advice!

I still haven not tried the temp mode but will explore soon...