Help: Replacement Glass for Coil Master 'ELFY RTA'

[Baddog]

Can't seem to find replacement glass for the 'ELFY rta' even on Coil Masters website and none of my spare glass tanks will fit?


Thanks in Advance!

 

[puffon]

They maybe too new. You could try e-mailing CM.
I'm still waiting for my tanks to ship from FT.
Ordered 11/2...

 

[zoiDman]

Can't seem to find replacement glass for the 'ELFY RTA' even on Coil Masters website and none of my spare glass tanks will fit?


Thanks in Advance!

I'm still Waiting for mine to ship. So I can't confirm any of the below...

Glass size is...: FastTech Forums

 

[zoiDman]

Can't seem to find replacement glass for the 'ELFY RTA' even on Coil Masters website and none of my spare glass tanks will fit?


Thanks in Advance!

BTW - Where did you get yours?

 

[zoiDman]

They maybe too new. You could try e-mailing CM.
I'm still waiting for my tanks to ship from FT.
Ordered 11/2...

I ordered mine on 11/9 from FT also.

The Black one has FT photos now. So I would imagine that FT would be receiving the SS ones soon.

 

[puffon]

I ordered mine on 11/9 from FT also.

The Black one has FT photos now. So I would imagine that FT would be receiving the SS ones soon.

Yes, FT said they expect them in this week.

 

[zoiDman]

Yes, FT said they expect them in this week.

Cool.

I'm hoping it will works as well (or Better?) than my Serpent Alto.

 

[bombastinator]

Failing the manufacturer the coils not thing I can think to do is dig up a micrometer and get exact dimension me from the glass you still have. You need height, interior diameter, exterior diameter, and glass thickness.

Using that you might maybe find some other glass that is exactly the same. Maybe. Probably cheaper and easier to get a new atty

 

[zoiDman]

Got a Shipping Notice today from FT.

My Elfy is on it's way!

 

[puffon]

Got a Shipping Notice today from FT.

My Elfy is on it's way!

Same here...

 

[zoiDman]

Same here...

Cool.

I have High Hopes for the Elf. Because I like the way Serpent Alto hits and the Elfy is Basically the Same.

Just won't have to Grind off that Metal in front of the Coil to make Building easier. And perhaps the AFC ring will Easier to adjust when the Elfy is on a Mod.

 

[zoiDman]

Cool.

I have High Hopes for the Elf. Because I like the way Serpent Alto hits and the Elfy is Basically the Same.

Just won't have to Grind off that Metal in front of the Coil to make Building easier. And perhaps the AFC ring will Easier to adjust when the Elfy is on a Mod.

Just an Update:

My Elfy arrived Today. What a Very Cool little RTA.

Fit and Finish is Top Notch.
Threading is Buttery Smooth.
Building Couldn't be Easier.
Flavor is Very Good using a 3mm SS 26ga 0.35 Ohm Coil.
My Favorite 510 Drip Tips Fit Fine.

The Tank has a Very Nice Feature of having Small, Flat, Indents on the Top Cover and on the AFC Ring. This gives you some Leverage to Grip with when Removing the Top Cover to Fill/Re-Fill. Or when Adjusting the AFC Ring.

Overall I give this Elfy Very High Marks. Very High.

The Only Con I can find or is worth Mentioning is that the Pin Connector is a Tad Long. So it might Bottom Out on some Mods causing a Gap between the Mod and the base of the Elfy.

Not Exactly a Deal Breaker. And a Kidney Puncher Mod Guard filled the Gap on my eVic Primo SE Perfectly.

KP Mod Guard - 5 Pack

 

[puffon]

Just an Update:

My Elfy arrived Today. What a Very Cool little RTA.

Fit and Finish is Top Notch.
Threading is Buttery Smooth.
Building Couldn't be Easier.
Flavor is Very Good using a 3mm SS 26ga 0.35 Ohm Coil.
My Favorite 510 Drip Tips Fit Fine.

The Tank has a Very Nice Feature of having Small, Flat, Indents on the Top Cover and on the AFC Ring. This gives you some Leverage to Grip with when Removing the Top Cover to Fill/Re-Fill. Or when Adjusting the AFC Ring.

Overall I give this Elfy Very High Marks. Very High.

The Only Con I can find or is worth Mentioning is that the Pin Connector is a Tad Long. So it might Bottom Out on some Mods causing a Gap between the Mod and the base of the Elfy.

Not Exactly a Deal Breaker. And a Kidney Puncher Mod Guard filled the Gap on my eVic Primo SE Perfectly.

KP Mod Guard - 5 Pack

Sounds good.
Still waiting for mine to land. Must have been put on the slow boat.

 

[zoiDman]

Sounds good.
Still waiting for mine to land. Must have been put on the slow boat.

The USPS Tracking on mine was Funky. The last even was it left ICS. And my Expected Delivery was for Wednesday.

Then Bingo - Bango, it shows up on my porch Today.

I'm sure yours will arrive Shortly. And I think you are Going to Like It!

 

[zoiDman]

BTW - Another thing I like about the Elfy is the Fill Openings are Huge.

Makes Filling with an Eye Dropper or Dropper Bottle much Easier!

 

[puffon]

Just an Update:

My Elfy arrived Today. What a Very Cool little RTA.

Fit and Finish is Top Notch.
Threading is Buttery Smooth.
Building Couldn't be Easier.
Flavor is Very Good using a 3mm SS 26ga 0.35 Ohm Coil.
My Favorite 510 Drip Tips Fit Fine.

The Tank has a Very Nice Feature of having Small, Flat, Indents on the Top Cover and on the AFC Ring. This gives you some Leverage to Grip with when Removing the Top Cover to Fill/Re-Fill. Or when Adjusting the AFC Ring.

Overall I give this Elfy Very High Marks. Very High.

The Only Con I can find or is worth Mentioning is that the Pin Connector is a Tad Long. So it might Bottom Out on some Mods causing a Gap between the Mod and the base of the Elfy.

Not Exactly a Deal Breaker. And a Kidney Puncher Mod Guard filled the Gap on my eVic Primo SE Perfectly.

KP Mod Guard - 5 Pack

Finally got mine.
Your review is spot on.
I like it, very small, gets lost in a Knight v2 side by side.

 

[puffon]

Can't seem to find replacement glass for the 'ELFY RTA' even on Coil Masters website and none of my spare glass tanks will fit?


Thanks in Advance!

Someone mentioned in this thread:
Glass size is...: FastTech Forums
that this glass fits:
$2.03 Authentic Vapesoon Glass Tank for Wotofo Conqueror Mini Atomizer (2-Pack) 2-pack at FastTech - Worldwide Free Shipping
Haven't tried it tho.

 

[zoiDman]

Finally got mine.
Your review is spot on.
I like it, very small, gets lost in a Knight v2 side by side.

Very Cool puffon.

Yeah I'm Very Happy with the Elfy. There just Isn't much I don't like about it.

And the Flavor is on Par with my Cut-Down SXK Wine RTA. Which is my Favorite RTA for flavor.

 

[puffon]

Not sure if OP still needs replacement glass.
Finally got these in from FT, they do fit the Elfy.
$2.03 Authentic Vapesoon Glass Tank for Wotofo Conqueror Mini Atomizer (2-Pack) 2-pack at FastTech - Worldwide Free Shipping