I build my own coils, and right now I'm using 11-turns of single strand 26ga solid ni-80 wire, which runs between 0.66 and 0.71 ohms, depending on the mod you ask. I went and looked up the TCR value for ni-80, as my wire doesn't tell me, and best info I can find says it's 0.000112 for ni-80. The GeekVape T200 I have only has four digits, no decimal place, and I'm trying to figure out which digits get entered there so I can set it correctly. None of the manuals provide this information, and I don't usually use TCR, so I don't have experience in any patterns of this mods might have. Could anybody offer some insight?
GeekVape T200 TC-TCR with 26ga Ni-80
- Thread starter StikShift4Life
- Start date
- th_trl_thread_readers 0
Hi and welcome,
Ni80 and Ka1 are both poor choices for TC and are used typically in wattage/power mode.
IMO, find a more suitable material for TC; SS, Ni200, Zr, Ti.
www.e-cigarette-forum.com
HTH
I
Ni80 and Ka1 are both poor choices for TC and are used typically in wattage/power mode.
IMO, find a more suitable material for TC; SS, Ni200, Zr, Ti.
The Ultimate TCR List
The ultimate TCR list -- The kick off. I created this to help de-clutter some other ECF threads, and so that we can have a focused discussion. It's for mods that employ linear, single-value TCR approximations (not .csv breakpoint curves). I'll...
www.e-cigarette-forum.com
HTH
I
Similar threads
- Locked
