Fatality m25 rta

[Marper]

Just got my m25 after waiting nearly 8 weeks from fasttech, very different rta than I'm used to,two afc rings and an option to close the juice ports to stop leaking, looks really good and build quality is nice.
Now to think about the build, I'm thinking flatwire might be good but otherwise I'll go Clapton coils.
I'll let you know how I get on with it sometime next week when I take one of my tanks out of rotation, looking forward to building this tank.

 

[Marper]

I decided to build it with ss316 claptons, premade,I had a few in my vape box, vaping at 0.14 ohms and yeah, this is a fantastic tank, I positioned my coils more to the centre of the tank because of the twin afcs, the vape is really smooth, vaping some nice far east neon red slushie at 70/30 vg/pg and 3mg nic,you get so many options with this tank, you dont have to coil it like I have done ,leave the coils away from the centre and I bet its completely different than the way I built this tank, yes I'm a very happy chappie with this and the wicking is so easy

 

[Marper]

Its a pretty hot tank, I'm vaping at 70/80 watts as I've not yet found the sweet spot, maybe it's hot because of my low ohm build, other than that the flavour is fantastic and vapour is just clouds, takes time to learn a new tank and right now I've got lots as I'm on lockdown

 

[Marper]

I've got both afcs fully open and considering it's my first build and no leaks, but most of all it certainly draws the juice, I can chain it no prob

 

[Marper]

But its gets seriously hot, not had this for ages, I think it's down to the posts being very close to the base, god knows but yeah it does get hot, I'm thinking it might be my build, but I don't care, that is one nice tank.
If you want clouds get this tank,its mad

 

[Don29palms]

But its gets seriously hot, not had this for ages, I think it's down to the posts being very close to the base, god knows but yeah it does get hot, I'm thinking it might be my build, but I don't care, that is one nice tank.
If you want clouds get this tank,its mad

I don't have that tank but from the pictures it looks like the coils are not over the airflow. It looks like most of the airflow is going around the outside of the coil. Those coils run on the hot side especially in a tank. You might try moving the coils so the airflow hits on the bottom of the coils so it will flow around the whole coil instead of just the one side. You'll probably get better flavor too.

 

[Marper]

I don't have that tank but from the pictures it looks like the coils are not over the airflow. It looks like most of the airflow is going around the outside of the coil. Those coils run on the hot side especially in a tank. You might try moving the coils so the airflow hits on the bottom of the coils so it will flow around the whole coil instead of just the one side. You'll probably get better flavor too.

Yeah I know but there is a separate centre airflow afc plus the side afc, I'm getting lots of flavour, just that it's a hot tank is worrying me a little bit

 

[Marper]

You have a pure centre airflow controlled by one ring and you have sideflow controlled by the other afc, I went for centre control more than side

 

[Marper]

Like I say ,I've got time to dial it in

 

[Marper]

This is the actual deck with the centre hole grid removed, so one afc controls the inner the other does the outside

 

[bsidb]

M25 ftw , its the only tank in my rotation rn

 

[Marper]

And you can see that the outer holes are tapered, that's why I went for a close build

 

[Mordacai]

@Marper, have you worked out what each airflow control ring actually controls?

Just asking if you didn't quite know yet as even with the original there wasn't any explination provided.

 

[Marper]

Yes ,I just shut one off and blew through the other, hehe

 

[Marper]

Mine is a clone from fasttech cause I couldn't get the original so no manual.
Bisbd has got the original

 

[bsidb]

nope, clone here also, from 3fvape I think

 

[Marper]

Well that's a nice clone, yeah they are the nuts, I love mine and I've only had it 12 hours

 

[Marper]

I'm seriously going to have to get a few of these tanks, it's like when I loved my reload cause it was better than anything out there, I still love my reload but with this tank there are so many options for building and vaping

 

[Marper]

The art of this tank is the juice holes, qp have got it perfect, no nonsense little poxy holes that dont let the juice in, this is by far the best I've experienced, I'm not made of money so I don't have high cost stuff but this is the best I've got, my manta in second place

 

[Mordacai]

This was one of the best supposedly, the Ulton version (they do make a good clone).
ULTON Fatality M25 Style 316SS 25mm RTA Rebuildable Tank Atomizer 4ml/5.5ml - Silver