Does the EGO adapter described herein even exist?

[Olinb]

As I understand it, the male (outer) threads on an ego twist are "EGO" threads. The smaller diameter female threads (inner) are 510 threads. So, that said what I am looking for would be something that screws down on the ego threads just exactly like a cone does but allows you to screw a 510 polypro tank onto it. I am basically attempting to bypass having to constantly add/remove tanks and such from the existing threads of a battery so they will last longer and also because I want to put one of those lanyards with the ego collar on it and leave it on all the time.

E.G. it would have a female ego connector to attach to the battery, and then the regular female 510 to attach your tank to.

An even better adapter than what I just described would be:
a female ego connector that attaches to the battery,
with regular ego male threads to attach your clearo to,
and a female 510 to attach your tank to

Basically, when attached to the battery all it really does is make the device longer. You wind up with exactly the same connectors you have when nothing is connected. But since it is an adapter if you screw up the threads you just toss it and get another.

I know they make a 510-510 adapter. I just want one that screws on to the ego threads of the battery since it seems to me that would be a much stronger connection.

Thanks for any suggestions....

 

[scalewiz]

Never seen such an animal yet. One thing I have done on one of my mods is to use a double 510 to ego adapter. I screw the first adapter on, then screw on a ego-threaded sleeve that is normally used to cover up the ego threads when using a tank with 510 threads, like a mini vivi nova for example. Then I screw on a second 510 to ego adapter. I screw on my Kanger T2 or Stardust. Then the small sleeve is screwed up against the device, which makes it much more secure. Still attached everything via the 510 connector, but the threads are protected from wear. You might get creative with things you see on the internet and come up with something.

 

[Iffy]

Would THIS work fer ya?

 

[Absintheur]

I gotta believe the battery will completely fail before you can wear out the threads. You can use a thread protector to support a 5ml tank...

https://kalamazoovaporshop.com/eGo-Chrome-Cone-for-the-6mL-Dual-Coil-SmokTech-Tank-Cartromizer.html

and take it off when you want to use something like a Stardust.

If you want to use the smaller 3.5 tanks then use this thread protector...

https://kalamazoovaporshop.com/eGo-...5-mL-SmokTech-Dual-Coil-Tank-Cartromizer.html

 

[Olinb]

Would THIS work fer ya?

This is EXACTLY what I want. Almost.

Actually, this uses a 510 connection to connect to the ego twist battery. If it used the bigger ego connection to attach to the battery, then yes it would be exactly what I want. However, since I can't find what I am looking for I believe I will get one of these and also grab one of the sleeves mentioned below. Thanks everyone.

 

[Rickajho]

It sounds like you are looking for a shorty eGo cone. Take a look here for some examples: Cones