BP Mods Lightsaber 60W/40W Pod Mod Kit
authentic / 5ml / wood sleeve exchangeable / real boost chip set / DL & MTL vaping / 2A USB-C charging
Details:
The BP Mods Lightsaber Pod Mod Kit, comes with two versions - standard 2200mAh and compact 1500mAh. The pod mod received a small zinc case with a comfortable fitted silhouette and a decorative woodgrain insert. A polymer cartridge with a twisted faceted cap and two different drip-types for different types of airflow was placed on top. The base was belted with a knurled air ring. A control panel was placed under the connector, consisting of a small display and two adjustment keys. The activation button and the USB port are installed on the opposite side. The device can operate in Variwatt, Varivolt or Bypass modes. The maximum output power will be 60 or 40 watts, depending on the version of the kit. The integrated battery will have a stock of 2200 or 1500mAh. Charging is carried out via USB Type-C with a current of 2A. The shock-resistant polymer reservoir will hold 5ml of liquid. The cartridge comes with four different evaporators from the TMD series at once. In addition, replacement landing rings and a standard 510 connector will be available separately.
Max Power: 60W
Battery Capacity: 2100mAh
USB Type-C Charge: 5V/2A
Wood Sleeve: SS-Bubinga / Gunmetal-Phoebe Zhennan
Pod Capacity: 5ml
Material: PCTG + Stainless Steel + N52 Magnets + Silicon
Kit Package:
1*Lightsaber Mod
1*Pod Tank
1*TMD Pro 0.55ohm Coil for RDL
1*TMD Pro 1.5ohm Coil for MTL
1*TMD Mesh 0.3ohm Coil for DL
1*TMD Mesh 0.8ohm Coil for MTL & RDL
1*MTL Drip Tip
1*DL Drip Tip
1*O-rings Pack & Slicone Plug
authentic / 5ml / wood sleeve exchangeable / real boost chip set / DL & MTL vaping / 2A USB-C charging
Details:
The BP Mods Lightsaber Pod Mod Kit, comes with two versions - standard 2200mAh and compact 1500mAh. The pod mod received a small zinc case with a comfortable fitted silhouette and a decorative woodgrain insert. A polymer cartridge with a twisted faceted cap and two different drip-types for different types of airflow was placed on top. The base was belted with a knurled air ring. A control panel was placed under the connector, consisting of a small display and two adjustment keys. The activation button and the USB port are installed on the opposite side. The device can operate in Variwatt, Varivolt or Bypass modes. The maximum output power will be 60 or 40 watts, depending on the version of the kit. The integrated battery will have a stock of 2200 or 1500mAh. Charging is carried out via USB Type-C with a current of 2A. The shock-resistant polymer reservoir will hold 5ml of liquid. The cartridge comes with four different evaporators from the TMD series at once. In addition, replacement landing rings and a standard 510 connector will be available separately.
Max Power: 60W
Battery Capacity: 2100mAh
USB Type-C Charge: 5V/2A
Wood Sleeve: SS-Bubinga / Gunmetal-Phoebe Zhennan
Pod Capacity: 5ml
Material: PCTG + Stainless Steel + N52 Magnets + Silicon
Kit Package:
1*Lightsaber Mod
1*Pod Tank
1*TMD Pro 0.55ohm Coil for RDL
1*TMD Pro 1.5ohm Coil for MTL
1*TMD Mesh 0.3ohm Coil for DL
1*TMD Mesh 0.8ohm Coil for MTL & RDL
1*MTL Drip Tip
1*DL Drip Tip
1*O-rings Pack & Slicone Plug
