21700 battery

[Dannielle.c92]

Have the armour pro , which 21700 battery is a good one to use? I vape around 40-50 watts about 70% of the time I stay at 48 watts. Please & thank you

 

[bombastinator]

Battery Mooch

Mooch's blog | E-Cigarette Forum

For that kind of wattage on a single battery mod you probably want a 30amp battery

 

[QcVaper]

I use a pink Efest and an Ijoy one both 3000 MaH and 30 amps (the ijoy is rated for 40 but Mooch prooved it's not)

 

[madstabber]

I have a few Golosi S35’s which is a solid choice. The Samsung 40T is probably your best choice because it eliminates the chance of rewraps. Last but not least I got an Avatar Controls 21700 with a mod purchase and it has been great as well. That’s what I’ve used so that’s what I can personally recommend. Good luck finding a great cell for your vaping needs.

 

[bombastinator]

I use a pink Efest and an Ijoy one both 300 MaH and 30 amps (the ijoy is rated for 40 but Mooch prooved it's not)

Assuming it’s still the same battery under the wrap that mooch tested. I just don’t trust rewrap period.

 

[Swoop03]

I got the same mod a few weeks ago and I grabbed two golisi s35s after referencing one of moochs charts and seeing what the site I ordered from had. Seems like a good quality. I vape .3 and .5 fused single claptons in it. I get 12 to 16 hours on a battery depending on the stress levels of the day. 3750mah and at least 30amp cdr IIRC.

 

[QcVaper]

Assuming it’s still the same battery under the wrap that mooch tested. I just don’t trust rewrap period.

Same but luckily even if it was 20 amps i'd be fine since i barely go over 30 watts

 

[Tim Wiseman]

I use a pink Efest and an Ijoy one both 300 MaH and 30 amps (the ijoy is rated for 40 but Mooch prooved it's not)

I take it the 300mAh was a typo lol

 

[diagrammatiks]

Only get the 40t

 

[Tim Wiseman]

Have the armour pro , which 21700 battery is a good one to use? I vape around 40-50 watts about 70% of the time I stay at 48 watts. Please & thank you

Yeah 30A and your laughing as it's quite rightly on the side of caution

depending on resistance you vape at what you need changes but 30A more than covers you:

0.1ohm 50W = 22A
0.15ohm 50W = 18A
0.2ohm 50W = 16A
0.3ohm 50W = 13A
0.4ohm 50W = 11A
0.5ohm 50W = 10A

 

[QcVaper]

I take it the 300mAh was a typo lol

Oopsie, Yeah my bad it's 3000 not 300

 

[mimöschen]

Both the Golisi S35 and Samsung 40T are excellent choices.

 

[Dannielle.c92]

I have 2 tanks I use
#1 - tobeco super mini tank - .5 tobeco coil
#2- Eleaf melo 4 tank- .3 ecl coil

I found out that aspire coils can be used with the tanks I have so my current coils I have are
Tobeco coils - .5 & .2 (the .2 tobeco coil sucks & has no flavor to me so I use that one as a last resort)

Eleaf ECL- SS316L .18
Eleaf ECL - SS316L .3

Aspire Triton .3
Aspire Triton .4

Completely off topic
I broke my glass for my melo 4 tank & the aspire coils don't gice good flavor in the tobeco tank idk if it's because the melo 4 tank has bigger airflow. I was gonna use the Triton coils in the melo 4 tank until I broke the glass.

Yeah 30A and your laughing as it's quite rightly on the side of caution

depending on resistance you vape at what you need changes but 30A more than covers you:

0.1ohm 50W = 22A
0.15ohm 50W = 18A
0.2ohm 50W = 16A
0.3ohm 50W = 13A
0.4ohm 50W = 11A
0.5ohm 50W = 10A

which brand is the 30A ?

And I'll look into the samsung 40t & golisi s35
What is the max wattage for those batteries? I know I won't go past 48 watts but it's still good to know.

 

[Tim Wiseman]

I have 2 tanks I use
#1 - tobeco super mini tank - .5 tobeco coil
#2- Eleaf melo 4 tank- .3 ecl coil

I found out that aspire coils can be used with the tanks I have so my current coils I have are
Tobeco coils - .5 & .2 (the .2 tobeco coil sucks & has no flavor to me so I use that one as a last resort)

Eleaf ECL- SS316L .18
Eleaf ECL - SS316L .3

Aspire Triton .3
Aspire Triton .4

Completely off topic
I broke my glass for my melo 4 tank & the aspire coils don't gice good flavor in the tobeco tank idk if it's because the melo 4 tank has bigger airflow. I was gonna use the Triton coils in the melo 4 tank until I broke the glass.



which brand is the 30A ?

And I'll look into the samsung 40t & golisi s35
What is the max wattage for those batteries? I know I won't go past 48 watts but it's still good to know.

As far as i'm aware 21700 batteries are 30A or higher it's the one's claiming to be higher that need a bit of investigation. Battery is up to you i get more concerned like some have pointed out that it's the battery they say it is and not a cheap battery re-wrapped (more of an 18650 issue). Buy from a trusted source. The two batteries you mentioned are perfectly good for the armour at full wattage so your fine. Those resistances you listed at 48W even a Samsung 30Q would be happy with but it's always best to get a battery to cope with the devices potential rather than what you tend to use it at.

 

[mimöschen]

Amps x 3 = max wattage per battery.

 

[Zaryk]

I just don’t trust rewrap period.

I am right there with ya. I have zero trust for the rewrap companies. They obviously don't care about our safety with exaggerated specs and bait and switch tactics, so I will not support those companies because of it.

I run Samsung 40Ts and absolutely love them. I highly recommend them.

 

[Mooch]

Yeah 30A and your laughing as it's quite rightly on the side of caution

depending on resistance you vape at what you need changes but 30A more than covers you:

0.1ohm 50W = 22A
0.15ohm 50W = 18A
0.2ohm 50W = 16A
0.3ohm 50W = 13A
0.4ohm 50W = 11A
0.5ohm 50W = 10A

The coil resistance has essentially no effect on the battery current in a regulated mod. Only the wattage setting affects the battery current.

Max Battery Current = 50W / 3.2V / 0.9 for efficiency losses = 17.4A for any coil resistance that the mod can handle.

 

[Tim Wiseman]

The coil resistance has essentially no effect on the battery current in a regulated mod. Only the wattage setting affects the battery current.

Max Battery Current = 50W / 3.2V / 0.9 for efficiency losses = 17.4A for any coil resistance that the mod can handle.

So my ohms law app is only fit for purpose for mech builds?

 

[Robin Becker]

I am right there with ya. I have zero trust for the rewrap companies. They obviously don't care about our safety with exaggerated specs and bait and switch tactics, so I will not support those companies because of it.

I run Samsung 40Ts and absolutely love them. I highly recommend them.

If you love the 40T, most probably you would not like to hear, that the battery you use is not even in mass production...so that mean basically, that you use a bad grade of a battery, that comes not from official Samsung SDI distribution channel.

 

[Baditude]

So my ohms law app is only fit for purpose for mech builds?

That would be correct. Regulated mods use Watts Law.