| 2 Buttons allow you to select voltage from 3 volts to 6 volts, in 0.1v increments Pocket Friendly Design: Hold the button down for 5 seconds to turn the device on, hold the button again for 5 seconds to turn the device off. Regulated output keeps the voltage the same regardless of the remaining battery power. As the battery drains, the device will keep the voltage consistent. 10 Second Cutoff timer: If the activation button is held down for 10 seconds or longer, the unit will shut itself off until the button is released to prevent overheating the atomizer and the device. Short Circuit/Atomizer Protection: The VA Tube Mod can recognize an atomizer with a resistance too low for the current voltage setting and will drop the voltage to 3.7v to protect both the battery and atomizer. If the atomizer is too low or shorted out power will be shut off to protect the VA Tube Mod from being damaged. Reverse Battery Protection protects the device in case you put the battery is installed backwards. Battery Monitoring/Over-Discharge Protection: The device will monitor the battery voltage and automatically turn off when the battery is discharged, preventing damage to the battery by overly depleting it. The VA VV Tube Mod includes a voltage meter in the LCD display, simply press the red power button 6 times and it will display the voltage of the battery for a few seconds allowing you to monitor the power left in the battery before it needs to be recharged. The 2 included 18650 High Drain batteries provide 4.2V at peak charge that will decrease to about 3.3 volts with use, before needing to be recharged. This will help you monitor the life cycle of the battery. The LCD screen will flash when the battery needs to be recharged, and will stop powering the device. Vent hole on the bottom of the device for added safety. Dimensions: 5"L x 0.86"D
|
