Even though it has nothing to do with the OP’s questions;
The basic dripbox has a maximum output of 3.6ish ~ 3.7v, so the maximum it can draw from the battery is 3.7v / .2Ω = 18.5a.
A known quality 20a CDR cell will work fine.
It isn't a regulated APV nor is it a mechanical, it uses a crude buck circuit to limit output. As battery voltage decreases so does output which lessens battery amp demand.
It has low battery, reverse polarity, low resistance, short circuit protection.
That is if you have an authentic, who knows what protections are in clone/knockoffs.
Sure is a lot safer & easier to use a decent quality regulated power device.
The basic dripbox has a maximum output of 3.6ish ~ 3.7v, so the maximum it can draw from the battery is 3.7v / .2Ω = 18.5a.
A known quality 20a CDR cell will work fine.
It isn't a regulated APV nor is it a mechanical, it uses a crude buck circuit to limit output. As battery voltage decreases so does output which lessens battery amp demand.
It has low battery, reverse polarity, low resistance, short circuit protection.
That is if you have an authentic, who knows what protections are in clone/knockoffs.
Sure is a lot safer & easier to use a decent quality regulated power device.