Resistance on MT3 is 3.0ohm

[trichman]

I purchased 2 MT3's and put one on my evic. The evic is reading the resistance as 3.0ohm. The website shows 2.4ohm. Can anyone verify? The evic set the voltage at 4.0 and the wattage at 5.4 when it booted up. I believe it is a 3ohm based on the performance at 4 volts. It works great regardless but if I had an ego running at 3.3volts, it wouldn't be such a great vape.

 

[shawnp1]

The evic will always boot up an recommend a default voltage setting. You can set that default output in the MVR software.
I will have to personally test another one but when they were listed the resistance was what we put on the site.

 

[trichman]

I went to the "device" menu and checked it there under atomizer, same result.

 

[shawnp1]

Interesting. It is just the one? Was it the one that came on the MT3?

 

[trichman]

Saturday it read 2.5ohm so I'm not sure why it showed 3.0. Seems to be as advertised after all. It works great!

 

[abower911]

Oddly enough I just bought two replacement atomizers for my vivi mini nova that were supposed to be 2.4ohm and reading 3.0ohms, even have 2.4ohm etched into them lol

 

[Kemosabe]

Oddly enough I just bought two replacement atomizers for my vivi mini nova that were supposed to be 2.4ohm and reading 3.0ohms, even have 2.4ohm etched into them lol

vision is notorious for having their 1.8Ω & 2.4Ω heads higher than marked. ive had more accurate results with the 2.8Ω head and 3.2Ω head. but in the end it matters not (to me). especially seeign how im likely to rebuild the head when it conks out and theres no way im gonna match exactly what was etched on the head. not worth my time.