With its advanced Yihi SX330v3c chip, the IPV4s can regulate the temperature of pure nickel wire coils avoiding those rough dry hit.
Match this with our Reactor Wire, build down to 0.1 oHm resistance values and you'll be in Vapor Heaven.
Set the system on "Joule Mode" and input your desired max temperature (for instance, with Japanese Organic Cotton, a max temp set below the ignition point of 410° is desired) and vape without ever worrying about constantly redripping or singing/burning your wick. The IPV4 requires (2) 18650 batteries and features an all new "ball bearing" door to make switching batteries a snap.
Details:
Built by Green Leaf/Pioneer4You.
Black mod – with black battery cover
Yihi chip – SX330 V4S.
Reads temperature in Joules!
Resistance reads down to 0.1 Ω.
Resistance reads up to 3.0 Ω.
Adjustable wattage: 5W-100W.
Output voltage: 1.0V – 7.5V.
Takes 2 18650 Batteries (batteries are not included).
Pass through mode is supported.
Fully magnetic battery cover, no screws necessary!
Auto ohm resistance meter finds ideal voltage for tank/dripper.
Voltage is calculated automatically as wattage is adjusted.
Wattage regulated via two buttons, -/+.
The IPV4 Mod Mini USB interface charging port.
Aluminum alloy case with rubber battery cover.
Advanced LED interface screen.
Spring-loaded self-adjusting 510 pin.
Comes with Mini USB cable for firmware update.
A universal 9V AC Adapter can be purchased at any electronics outlet. This is used to charge the batteries.
Match this with our Reactor Wire, build down to 0.1 oHm resistance values and you'll be in Vapor Heaven.
Set the system on "Joule Mode" and input your desired max temperature (for instance, with Japanese Organic Cotton, a max temp set below the ignition point of 410° is desired) and vape without ever worrying about constantly redripping or singing/burning your wick. The IPV4 requires (2) 18650 batteries and features an all new "ball bearing" door to make switching batteries a snap.
Details:
Built by Green Leaf/Pioneer4You.
Black mod – with black battery cover
Yihi chip – SX330 V4S.
Reads temperature in Joules!
Resistance reads down to 0.1 Ω.
Resistance reads up to 3.0 Ω.
Adjustable wattage: 5W-100W.
Output voltage: 1.0V – 7.5V.
Takes 2 18650 Batteries (batteries are not included).
Pass through mode is supported.
Fully magnetic battery cover, no screws necessary!
Auto ohm resistance meter finds ideal voltage for tank/dripper.
Voltage is calculated automatically as wattage is adjusted.
Wattage regulated via two buttons, -/+.
The IPV4 Mod Mini USB interface charging port.
Aluminum alloy case with rubber battery cover.
Advanced LED interface screen.
Spring-loaded self-adjusting 510 pin.
Comes with Mini USB cable for firmware update.
A universal 9V AC Adapter can be purchased at any electronics outlet. This is used to charge the batteries.
