Creating a write up in case someone needs this info one day.
*These instructions are only for the SXK Delro d60e with 2200mAh LiPo battery*
The default dna60 is not programmed correctly by SXK but can be easily fixed in eScribe (EVOLV SOFTWARE).
Always recommend using the international version of the software instead of the US version.
Only difference is a slightly larger download size (couple megabytes) and you get the full featured software.
You will want to right click your desktop icon and run eScribe as admin on windows so your device is detected when plugged in.
If it's your first time connecting your device to eScribe you might get a pop up or message up top alerting you to the latest available update
go ahead and install the update.
Now in the menu bar go to File->'Save As' and save your default settings as SXK_DNA60_Delro_Default or whatever is easy for you to remember.
You've now covered the basics and have a copy of your default settings that you can always revert to.
Step 1. Go to your menu bar up top and select "Options->User Interface->Manufacturer" this will unlock extra settings for you to adjust in eScribe.
Step 2. Go to the tab "mod" then the new tab "battery" below it. You will find that the SXK delro is set for "Type: Lithium-Ion" and "Cell Soft Cutoff: 2.75V"
you want to change these settings to "Type: Lithium-Polymer and "Cell Soft Cutoff: 3.1V" leave all other settings the same.
Step 3. Press the "UPLOAD SETTINGS TO device" button and it will send the changes to your device.
Step 4. In the menu bar go to File->'Save As' and save your updated default settings as SXK_DNA60_Delro_Default_With_Battery_Update or whatever is easy for you to remember.
*These instructions are only for the SXK Delro d60e with 2200mAh LiPo battery*
The default dna60 is not programmed correctly by SXK but can be easily fixed in eScribe (EVOLV SOFTWARE).
Always recommend using the international version of the software instead of the US version.
Only difference is a slightly larger download size (couple megabytes) and you get the full featured software.
You will want to right click your desktop icon and run eScribe as admin on windows so your device is detected when plugged in.
If it's your first time connecting your device to eScribe you might get a pop up or message up top alerting you to the latest available update
go ahead and install the update.
Now in the menu bar go to File->'Save As' and save your default settings as SXK_DNA60_Delro_Default or whatever is easy for you to remember.
You've now covered the basics and have a copy of your default settings that you can always revert to.
Step 1. Go to your menu bar up top and select "Options->User Interface->Manufacturer" this will unlock extra settings for you to adjust in eScribe.
Step 2. Go to the tab "mod" then the new tab "battery" below it. You will find that the SXK delro is set for "Type: Lithium-Ion" and "Cell Soft Cutoff: 2.75V"
you want to change these settings to "Type: Lithium-Polymer and "Cell Soft Cutoff: 3.1V" leave all other settings the same.
Step 3. Press the "UPLOAD SETTINGS TO device" button and it will send the changes to your device.
Step 4. In the menu bar go to File->'Save As' and save your updated default settings as SXK_DNA60_Delro_Default_With_Battery_Update or whatever is easy for you to remember.
Last edited: