Whats up Vapesters! In this review I will be looking at the Wotofo Conqueror which was sent to me by Wotofo for the purpose of review.
http://www.wotofo.com/wotofo-dual-postless-deck-conqueror-r…
Lets start off with some stats and dimensions: -
Materials: Pyrex Glass + Stainless Steel
Dimensions: 60.8x22mm (Length x Width)
Weight: 0.080 kg
Dual coil postless build RTA
Capacity: 4ml
Top fill
Liquid feed adjuster (works like air flow but for liquid holes)
What do you get when you buy this from new?
1 x Conqueror RTA tank
1 x Japan cotton
1 x Multi-function Wrench
2 x Prebuilt Twisted Coils
1 x Spare Parts
1 x User Manual
1 x Gift Box with anti-fake label
I will now review 6 areas of the tank and give my honest opinion. The areas I will cover are; Deck, Air flow, filling up, flavour, cloud production and cleaning the tank. I will then finish off with a list of pros and cons.
Deck:
This deck is a little different to anything I have reviewed. Its postless! What this means is the coils feed down into holes in the deck, with the screws located on the bottom sides for securing in place. Once your coils are in their designated holes and fixed in place they should be sitting on top of the air holes. This allows for the air to hit the coils directly and feed that fresh warm vapour into your mouth. The deck is easy to build on if you are using standard wire, if your tastes are for something like claptons or alien wire you might find the deck a little tight and the holes a little small. There are 4 slits to allow liquid to feed to the cotton, your cotton wants to be pushed in this area to cover the slits from the inside and the end of the cotton wants to rest on the bottom of the deck.
Air Flow:
The airflow is indicated by 10 holes on the bottom of the tank (5 on each side). Fully open it offers a good amount of air however not loads, for me I didn't find it an issue but I did need it fully open for a good lung hit. The restrictiveness of the air flow does mean it is possible to get a mouth to lung hit from this tank. The location of the air flow adjustment ring can be an issue when using with mods like the rx200 due to it being small and hard to grip with little room.
Flavour:
Good, really good! I did get great flavour from this tank however I feel similar tank types like the griffin gives slightly better flavour. I did find the best flavour came from a clapton build reading at 0.25 ohms (each coil on their own read 0.5ohms). The great design of the air flow does allow for you to kick up the wattage which will give you more clouds and flavour.
Cloud production:
The clouds are pretty decent however with the restricted air flow it isnt going to make the biggest. This tank is more aimed for the flavour chasers but it will beat your average kanger subtank mini in a cloud comp.
Pros:
* Great air flow design which allows for mouth to lung hits
* Simplistic deck, which is easy to build.
* Great flavour
* Well built with good capacity
Cons:
* Tank is on the large size
* Deck is a little small and cant handle big coils
* Too many spinning parts, this can make it hard to tighten.
Conclusion:
This tank was really good and fun to use. The deck was easy to build on and allowed for great flavour. The only things holding me back from buy this tank is the size, deck size and all the spinning rings. Im getting used to all the mini tanks coming out and I like them, this is a little too big for me. The deck is easy to build but I do like to mix it up and throw in different coil types, this deck isnt very forgiving on large coils. With all the spinning rings to change the air flow, restrict the feed holds, take off the top to fill, it makes it hard to keep everything tight. This can lead to leaking issues.
A video review on this tank and many more can be found on my youtube channel, please go check it out and subscribe <3
UK VAPESTER
- Rob (UK Vapester)
http://www.wotofo.com/wotofo-dual-postless-deck-conqueror-r…
Lets start off with some stats and dimensions: -
Materials: Pyrex Glass + Stainless Steel
Dimensions: 60.8x22mm (Length x Width)
Weight: 0.080 kg
Dual coil postless build RTA
Capacity: 4ml
Top fill
Liquid feed adjuster (works like air flow but for liquid holes)
What do you get when you buy this from new?
1 x Conqueror RTA tank
1 x Japan cotton
1 x Multi-function Wrench
2 x Prebuilt Twisted Coils
1 x Spare Parts
1 x User Manual
1 x Gift Box with anti-fake label
I will now review 6 areas of the tank and give my honest opinion. The areas I will cover are; Deck, Air flow, filling up, flavour, cloud production and cleaning the tank. I will then finish off with a list of pros and cons.
Deck:
This deck is a little different to anything I have reviewed. Its postless! What this means is the coils feed down into holes in the deck, with the screws located on the bottom sides for securing in place. Once your coils are in their designated holes and fixed in place they should be sitting on top of the air holes. This allows for the air to hit the coils directly and feed that fresh warm vapour into your mouth. The deck is easy to build on if you are using standard wire, if your tastes are for something like claptons or alien wire you might find the deck a little tight and the holes a little small. There are 4 slits to allow liquid to feed to the cotton, your cotton wants to be pushed in this area to cover the slits from the inside and the end of the cotton wants to rest on the bottom of the deck.
Air Flow:
The airflow is indicated by 10 holes on the bottom of the tank (5 on each side). Fully open it offers a good amount of air however not loads, for me I didn't find it an issue but I did need it fully open for a good lung hit. The restrictiveness of the air flow does mean it is possible to get a mouth to lung hit from this tank. The location of the air flow adjustment ring can be an issue when using with mods like the rx200 due to it being small and hard to grip with little room.
Flavour:
Good, really good! I did get great flavour from this tank however I feel similar tank types like the griffin gives slightly better flavour. I did find the best flavour came from a clapton build reading at 0.25 ohms (each coil on their own read 0.5ohms). The great design of the air flow does allow for you to kick up the wattage which will give you more clouds and flavour.
Cloud production:
The clouds are pretty decent however with the restricted air flow it isnt going to make the biggest. This tank is more aimed for the flavour chasers but it will beat your average kanger subtank mini in a cloud comp.
Pros:
* Great air flow design which allows for mouth to lung hits
* Simplistic deck, which is easy to build.
* Great flavour
* Well built with good capacity
Cons:
* Tank is on the large size
* Deck is a little small and cant handle big coils
* Too many spinning parts, this can make it hard to tighten.
Conclusion:
This tank was really good and fun to use. The deck was easy to build on and allowed for great flavour. The only things holding me back from buy this tank is the size, deck size and all the spinning rings. Im getting used to all the mini tanks coming out and I like them, this is a little too big for me. The deck is easy to build but I do like to mix it up and throw in different coil types, this deck isnt very forgiving on large coils. With all the spinning rings to change the air flow, restrict the feed holds, take off the top to fill, it makes it hard to keep everything tight. This can lead to leaking issues.
A video review on this tank and many more can be found on my youtube channel, please go check it out and subscribe <3
UK VAPESTER
- Rob (UK Vapester)
