I figured out what the two orange ones and the white one is for but for the life of me I can't find anything on what the two much smaller black ones and the one clear one are for. I was thinking maybe for the coils because they seem about the right size for the rings that are on them where they screw down and seal but that doesn't make much sense since you can just buy new coils. Does anybody know? Thanks! I have the smok stick V8 by the way.
What are the little rubber O rings included in the kit?
- Thread starter Cody McDubs
- Start date
- th_trl_thread_readers 0
-
- Tags
- smok stick v8
- Status
I don't have any SMOK attys but at a guess... if you really can't find what the spare replaces, check the drip tip. Some of the really small o-rings I've received are for that.
But, the alternative is... many of us have found, after the fact, that we lost an internal o-ring down the drain washing it out before the first use. Oops.
We generally learn to check for that from then on.
But, the alternative is... many of us have found, after the fact, that we lost an internal o-ring down the drain washing it out before the first use. Oops.
We generally learn to check for that from then on.
Hello and welcome to ECF. My 1st guess would be o rings for drip tip as well. On my Smok tfv4 there is a small o ring at the top of chimney.
Good morning.
Mine only came with 1 small clear/white and 1 small back, as well as the 2 bigger and the replacement filler thing.
If I had to guess the smallest black is for the drip tip. I compared it to the white which goes on the top piece where the coil screws in and it has a slightly smaller diameter.
Just tore my Baby Beast apart yesterday, can't see where else it would fit.
As always I reserve the right to be wrong.
Mine only came with 1 small clear/white and 1 small back, as well as the 2 bigger and the replacement filler thing.
If I had to guess the smallest black is for the drip tip. I compared it to the white which goes on the top piece where the coil screws in and it has a slightly smaller diameter.
Just tore my Baby Beast apart yesterday, can't see where else it would fit.
As always I reserve the right to be wrong.
When you unscrew the tank to change the coil look at the threads at the bottom of the chimney, there should be a clear oring there. Hth
Sent from my SAMSUNG-SM-G891A using Tapatalk
Sent from my SAMSUNG-SM-G891A using Tapatalk
I've done that. It's quite annoying and then usually requires google research. The only tank I got with SUPER clear instructions on assembly of EVERYTHING was the Russian 3.0 but trust me, that tank NEEDS a deconstructed map of which parts go where, there are about 85 of them or something. That's a tank I plan to not lose the user manual on...
Anna
Anna
I have bags of orings that I've accumulated so if I ever need a spare for a tank i usually have one that fits.
If not, Dental Floss! Works great with worn out orings, just remove the worn out one, wrap a couple strands of floss, put the oring back on top of it and chango-presto, no leakie![emoji16]
Sent from my SAMSUNG-SM-G891A using Tapatalk
If not, Dental Floss! Works great with worn out orings, just remove the worn out one, wrap a couple strands of floss, put the oring back on top of it and chango-presto, no leakie![emoji16]
Sent from my SAMSUNG-SM-G891A using Tapatalk
Thanks for all the replies! When I looked closer at the drip tip I did see there is a little black ring. It was hard to see because the drip tip is also black. The clear one seems to be a bit smaller so I'm still not sure what that one is for. Thanks for the help!
I just saw Tonee N's reply about the clear o ring being on the threads at the bottom of the chimney when you change the coil. So I will have to check that out. Thanks again everybody!
- Status
Similar threads
- Locked
- Locked
