VOOPOO VINCI E120 POD DEVICE REVIEWED BY BIGBOB2322

[Bigbob2322]

Hello friends and welcome back for today's review of a rather large pod device from Voopoo. The Vinci E120 device houses a 4500mAh battery and has a maximum power output of 120 watts, this device uses the performance proven PnP X coils that always produce great flavor for me. It's nice to have a almost full sized pod device that puts out high power and has a internal battery that can handle it. The Vinci E120 gives the user 18 different clock face themes but you have to earn them, more info in my review.

COLOR CHOICES

IN THE BOX


* 1pc VOOPOO VINCI E120 Device

* 1pc VINCI PnP X Cartridge DTL (5mL)

* 1pc PnP X 0.15ohm

* 1pc PnP X 0.3ohm (Pre-installed）

* 1pc Type-C Cable

* 1pc User Manual

* 1pc PnP X Platform Compatibility Guide

SPECIFICATIONS AND PARAMETERS


VOOPOO VINCI E120 Parameters:

Brand	VOOPOO
Product Name	VINCI E120 Kit
Size	115*46.6*23.6mm
Material	Aluminum Alloy + PC
Power Range	5-120W adjustable
Battery Capacity	4500mAh (built-in)
Output Voltage	3.2V-4.35V
Charging Voltage	5V/2A
Resistance Range	0.1-3.0Ω
Capacity	5ml (standard version)
Screen	2.4'' TFT screen
Charging	Type-C 5V/2A
Filling Type	Topside filling
Coil Included	PnP X 0.15Ω Coil, PnP X 0.3Ω Coil
Packing Size	149*71*49mm (1pc)
Carton Size	380*305*275mm (50pcs)
Color	Champagne Golden, Snow Blue, Spray Black, Glow Silver, Star Purple, Gray Metal, Rose Red

FEATURES

• Material: Aluminum Alloy + PC
• Size: 115*46.6*23.6 mm
• Color: Champagne Gold, Snow Blue, Jet Black, Brilliant Silver, Star Purple, Gray Gold, Rose Red
• Battery Capacity: 4500mAh
• Power Range: 5-120 W adjustable
• Output Voltage: 3.2-4.35 V
• Resistance: 0.1-3.0 ohm
• Charging: Type-C 5V / 2A
• Display: 2.4" TFT Screen
• One Touch Control
• Unlock New Screensavers
• 7 Safety Protections
• Overtime Protections:8s
• Short-circuit Protection
• Overcharge Protection
• Output Over-current Protection
• Low Battery Protection
• Over Temperature Protection
• Max Power Protection
• Accidental Touch Protection
• PnP X Coil Technology, A-Ten Lifespan
• E-liquid Capacity: 5 mL / 2 mL (TPD)
• E-Liquid Filling: Topside filling
• Slide to Adjust Airflow
• Compatible with VINCI PnP X cartridges
• Compatible with all PnP X coils
• PnP X 0.15 ohm
• PnP X 0.3 ohm (pre-installed)

5 ML POD USES ALL PnP X COILS

LONG COIL LIFESPAN ( PnP X )

LARGE DISPLAY SCREEN AND INTERNAL BATTERY

 

[Bigbob2322]

FIRST IMPRESSIONS


Packaging is simple with a slide out box from a outer sleeve, at first glance I noticed the added detail of Gold trim around the fire button but that's not all Gold trim is around the airflow selector, adjustment rocker bar control and lock switch as well. The Gold trim really makes the appearance look very classy. The pod itself is very lightly tinted for a easy view of juice levels in any light.

I always like to charge to a full charge any device that I review that houses a internal battery, this device came almost fully charged but it charged quickly because of the 2A charging. There is some animation when charging with a percentage readout as well as a minute countdown. The USB-C charge port is below the lock switch, because of the weight of this device it can be charged standing upright. It's not heavy but it feels like a full sized single battery compact mod .

It's great having a 5ml pod for fewer refills and it is more of a sipper of juice rather than being a guzzler. The magnets on the pod are really strong and actually pull the pod out of your hand when connecting to the device. Don't forget to pull the safety sticker off the bottom of the pod.

Having replaceable PnP X coils to use really boost the devices value because of the lifespan and great flavor these coils produce, cloud production is also very well done if that's your cup of tea.

 

[Bigbob2322]

Another nice feature is the pod has side fill that can be filled without removal of the pod, the fill port rubber plug seems like it will hold up over a long time of repeated use and the fill port hole itself is plenty large, I have had zero issues filling the pod multiple times during testing.

I feel that the Vinci E120 is better suited for RDL vaping than MTL vaping because of the diameter of the hole on the mouthpiece, in my opinion you can vape MTL but not comfortably. (TOO OPEN ).

Getting back to the devices classy look, I feel it looks great at any angle, branding on this device is scarce, one side has the Voopoo Vinci name in very small print that is hard to see, the back of the device has the Voopoo name on it but very lightly printed as well. Less branding adds to it's poise.

I'm always happy when I see a lock switch on a review device because is so convenient to just flip a switch to lock to device for pocket carry and it performs as it should with just the right amount of tension, no worries it's going to come off the lock setting.

 

[Bigbob2322]

There are 18 different clock faces you can choose from but there's a catch, the more you vape the more choices you get. Voopoo gives you 2 to start out with and the next one takes 100 vapes before it becomes available to open, the next face takes 500 vapes to open and so on.

You can select the duration of time the clock screen is on and set your correct time in the menu. To open the menu simply press and hold both adjustment buttons simultaneously then use either button to move through the menu. the fire button opens the selection you have made.

FINAL IMPRESSIONS


I really like the Vinci E120 and will continue using it for some time to come for many reasons. First reason is the great flavor that comes from the PnP X coils, I usually gravitate to lower OHMED coils because I like a warm vape and the 0.15Ω coil is my favorite but I like the 0.3Ω just as well and the vape albeit just a bit cooler works for me plus I get more battery life as well.

Having a 4500mAh internal battery is also a huge plus especially when using the 0.15Ω coil. I love that you don't have to buy complete pods but rather PnP X coils instead. In the past Voopoo would use a darker tint on their pods which in low light was a pain to view juice levels, the light tinting on this pod works great to view juice levels in any light.

The Vinci E120 also uses the smart wattage feature to pre select a wattage to use with the coil being used and not go over the maximum recommended wattage for that coil so you don't burn out a coil prematurely.

The large 2.4" display screen shows numbers, letters and designs in a large way, fonts are very easy to read and the colors are bright and vibrant.

As I mentioned earlier this is in my opinion a RDL vaping device because of the size of the airflow hole in the mouthpiece of the one supplied in the kit, with a narrower mouthpiece and smaller hole a MTL vape would be great and really make the 4500mAh battery last even longer.

I have no cons for this kit other than being a fingerprint magnet that can be seen when the display screen is off, I'm really nitpicking because it performs so well. Airflow is smooth and is manually operated ( NO AUTO DRAW FEATURE ).

Finally I come down to it's appearance which I find to be stellar and classy, the little extra touch of putting a Gold trim around all controls really pushes the envelope of stunning in my opinion.

I highly recommend the Vinci E120 100% for all the reasons mentioned. I would like to thank Amanda and Voopoo for providing the Vinci E120 for the purpose of my review, I would also like to thank all of you folks that read my reviews.


THANK YOU
BIGBOB2322

 

[hittman]

Great review Bob!

 

[Bigbob2322]

Great review Bob!

Thank you Hitt.

 

[Frenkyou]

Nice Review Bob

 

[Bigbob2322]

Nice Review Bob

Thank you Frenkyou.