Hello, today let's take a look at the voopoo vinci 3 mod Pod Kit. I will review in this Test each of the features that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.
► VooPoo Vinci 3 Mod Pod Kits; Before starting, let's see together some special features indicated by the manufacturer:
• Unrestricted vaping from tight to loose:
VINCI 3 adopts Mobius Airflow System, which offers large airflow control from 100-3000Pa. Combined with adjustable power from 5 to 50W, VINCI 3 offers users pure and tight puffs up to strong non-muffled DTL, fulfills the need for immersive clouds with painless transition.
• Two activation modes with instantaneous ignition:
VINCI 3 supports intelligent automatic drawing and also manual drawing via the Fire button. With the most sensitive 1000Pa airflow sensor, the VINCI 3 activates instantly. The dual ignition allows for trouble-free use.
► VooPoo Vinci 3 Mod Pod Kits; Packaging:
The VooPoo Vinci 3 Mod Pod Kit box package that I received has an external sleeve with light blue and blue color combinations, on the front there is a transparent window that allows you to see a large part of the device contained inside, there are also a large number 3 in the background, and the identifying words "VOOPOO" and "VooPoo Vinci 3 Mod Pod Kit". On the back of the outer sleeve are shown; packing list, manufacturer's address, legal notices, trademarks and logos. Sideways you can see; the QR-code, some main features in the form of icons, a stylized image of the device, the scratch & check, a label containing the barcode and the color of your choice which in this case is Aurora Red.
► VooPoo Vinci 3 Mod Pod Kits; Packing List:
• 1* Vinci 3 device
• 1* 4ml refillable Vinci 3 cartridge
• 1* PnP-TW30 0.3Ω coil with 28-36W range
• 1* 0.6Ω PnP-DW60 Coil with 18-23W range
• 1* Usb Type-C cable
• 1* User Manual
► VooPoo Vinci 3 Mod Pod Kits; Specifications and Features:
• Material: Zinc Alloy
• Dimensions: 101.3x30.5x21.6mm
• Weight: 98g
• Battery: Integrated 1,800mAh
• AFC: Mobius Airflow System
• Double manual/automatic activation
• Display: Oled
• Power regulation from 5 to 50W
• Output voltage: 3.2-4.2V
• Charging voltage: 5V/1A
• Resistance range: 0.15-3.0Ω
• Pod Capacity: 4ml (2ml TPD)
• Pod compatible with PnP platform coils
• Time out protection
• Short circuit protection
• Overload protection
• Output overcurrent protection
• Over discharge protection
• Over temperature protection
• Maximum power protection
► VooPoo Vinci 3 Mod Pod Kits; Available colours:
• Carbon Fiber Black
• Carbon Fiber Blue
Aurora Red
Aurora Blue
• Rose Gold
► VooPoo Vinci 3 Mod Pod Kits; First Impressions:
Compared with VINCI 2, the new VINCI 3 according to VooPoo offers a range of 100-3000Pa of airflow regulation due to excellent air tightness. With an adjustable output wattage of 5-50W, users enjoy multiple vaping modes and with different wattage settings. With 5-25W power output, users can have a tight draw with high resistance. With 26-40W power output, users can experience narrow or loose RDL. With an output power of 41-50W, users can easily enjoy the addictive vapor from the depths of their lungs, quickly relieving their nicotine addiction.
One of the strengths of this new Vinci is certainly the favorable relationship between the size of the battery (which for this kind of device is quite large 1800mAh) and the small and robust zinc alloy body. VooPoo claims that the VINCI 3 when fully charged can support 2 days of vaping on a single charge, easily meeting the needs of daily vaping. Furthermore Vinci 3 being more than 50% smaller and 20% lighter than Vinci II. Vinci 3 is more manageable and portable . In fact VINCI 3 is really solid and handy to hold, it also offers a pleasant tactile feedback due to its design made with careful assembly and with soft lines well connected to each other.
The sample I received for this test is "Aurora Red", on the side panels you find a nice shade of bright red with hints of black towards the bottom.
At the top there are two opposing transparent windows that allow you an easy and immediate view of the internal liquid level. Below there is a graduated scale with progressive notches and with the "+" symbol to indicate the direction of rotation of the adjustment toothed wheel to increase the air flow. The Fire key is slightly protruding and can be deactivated for purely automatic use. There are also the words "Gene AI" on one side and "VOOPOO VINCI" on the opposite side.
This regulation system called Mobius Airflow System is exquisitely made, the gear wheel is equipped with end stops and by rotating the wheel itself, you can adjust the lateral airflows present on the sides of Vinci 3 to easily obtain any vape mode from MTL narrowed down to RDL, down to a pretty loose Puff DL. On the sides there are also the Type-C charging port and the 0.69 "display.
For operation, VOOPOO VINCI 3 uses a single multifunction Fire button which via the Gene AI chip communicates with an interactive 0.69" screen. All this greatly simplifies the setting operations and the usage options as follows:
* To adjust the power, press the Fire key three times, when the power flashes, press the fire key to increase it from 5 to 50W with 1W steps at a time. Wait at least 5 seconds and the power is automatically confirmed.
* With the mod on, to enter the menu, press the key five times; to confirm the choice, press and hold the Fire button, the available choices are as follows:
• Button Lock/Unlock: allows you to activate or deactivate the Fire key, the automatic mode always remains active.
• Puff Clear: Clears the Puff counter
• Power Off: It allows you to turn off the Mod, to turn the Mod back on you need to click the Fire button 5 times.
VooPoo Vinci 3 denotes constructive care, in fact on the bottom the base has a rubberized coating, I really like this detail because the grip is greater to keep the device standing even during recharging, moreover the contact with the support surfaces is always silent thanks to the rubber that dampens the noise.
Inside the compartment / pod there are two magnets that offer the right magnetism to hold the cartridge, the 1000Pa airflow sensor channel remains slightly raised compared to the bottom to prevent it from easily filling up with condensation.
The 4ml refillable Vinci 3 cartridge has a nice clarity and classic spout shape with classic duckbill design so comfortable for lips. The spout is removable to access the fill port easily and in one step. Filling is really fast, you don't even need to take the cartridge out of the device.
In the image below you can see the bottom of the cartridge with the two magnets that mirror those inside the compartment/pod. You can easily enter your PnP resistance from below with a light press. In the side-by-side image you can see the top of the cartridge with the spout removed, the filling hole is protected by a dark colored silicone membrane and there is also a small vent hole for the "overflow".
As I anticipated, the Vinci 3 cartridge houses PnP resistors, for this reason you will really have a wide choice for MTL, for RDL and also for DL compatibly with the max power supplied by Vinci 3 Mod which I remind you is 50W.
► VooPoo Vinci 3 Mod Pod Kits; Vaping Test and Final Conclusions:
The concentrated e-juice I chose for this test was the "God Posion" diluted 10% in a 50:50 VG/PG base with 3mg/ml of boost.
• 0.6Ω PnP-DW60 coil with 18-23W range:
The Gene AI intelligent chip with this coil prevents you from selecting a power higher than 23W avoiding possible burns of the cotton caused by carelessness.
The 0.6Ω PnP-DW60 seems like the ideal choice to get a quiet and satisfying restrict RDL vape, or you can get a warm and aggressive MTL vape in the throat hit, flavor-laden, and cloud-rich. With creamy e-liquids this Mesh coil performs really well and with the Fire button the activation is immediate at any degree of opening of the air flow. The new sensor for the automatic draw has been revised by VooPoo and made more sensitive, but it works well and is only responsive by adjusting the airflow in a narrow position suitable for MTL. The "Mobius Airflow System" is able to perfectly calibrate the puff according to the user's needs. I like to use this coil with a power of 20W and with a minimum opening of the air flow I get a sufficiently fluid and spit-free steam delivery. Condensation is quite present in the pod compartment and this could be annoying, but it should not compromise the functioning of the device. I recommend as always (for all pod devices), to dry the bottom of the compartment with a cloth from time to time and not to leave the cartridge full of liquid inserted in the Mod for too long. The Chip Gene AI with a selected power of 20W and with this coil, it manages the charge of the 1,800mAh internal battery very well and if you are not a compulsive vaper, the charge level will be plenty enough for you all day long.
• 0.3Ω PnP-TW30 coil with 28-36W range:
The Gene AI intelligent chip (with this coil) automatically sets the wattage at 35W and prevents you from selecting a wattage higher than 40W, avoiding possible burns of the cotton caused by carelessness. The 0.3Ω PnP-TW30 is a great choice to get a loose vape ranging from RDL to DL depending on how you prefer to adjust the airflow. With the selected power of 36W and the airflow fully open, you get a very loose lung vape, quite flavorful and full of dense clouds of vapor. With this configuration I really like to close the airflow to about 50% because I get more heat and a higher concentration of flavour. The "Mobius Airflow System" when set for a large air passage (over 1,000Pa) prevents the automatic extraction sensor from receiving the right pressure, and will not activate. So for an RDL and DL vape (over 1,000Pa) you will be able to use Vinci 3 only with the use of the Fire button. Also in this case the production of condensation is considerable and you will need to periodically dry the compartment/pod. This is the small price to pay when using high performance coils such as PnP. PnP-DW60 and PnP-TW30 coils according to VooPoo have further improved the standards of durability and flavor production. I agree with VooPoo and I can say that they are really good coils.
I liked the VooPoo Vinci 3 Mod Pod Kit, so I continue to use it for my evening outings, I find that 4ml of capacity is an interesting figure for a small device like this, that uses a 1.800mah battery of great autonomy. I like the easy to read display, and I also like the airflow regulation system that works great in combination with using only the Fire button. When using MTL (below 1,000Pa) and with small portions of flow opening, the automatic extraction is perfectly usable by providing the right pressure to the sensor. The battery requires approximately 90 minutes to recharge. As far as I'm concerned, Vinci 3 is solid and captivating with a nice range of colors, you just have to choose your next super Mod Pod by VooPoo.
• Thanks to VooPoo for sending me Vinci 3 Mod Pod Kit for this review:
VINCI 3-VOOPOO VAPE Spark Your Life
Voopoo Vinci Series include classic Vape Kits such like Vinci Mod Pod,Vinci air and Vinci R Mod Pod Kit.
• Thank you for reading.
Last edited:
