Hello again. Today I’m here to talk about the new Argus P1s that was sent to me by Voopoo in order to provide you with a fair and honest review. The P1s is the latest addition to the Argus series of pod devices. It has an internal 800mah battery with three LED lights that flash in varying colors while in use while also indicating the battery level. The P1s has a 5V/2A fast charging rate which should minimize downtime while delivering an output range of 5-25 watts. The pods are compatible with the entire Argus family and boast a double coil lifespan.
WHAT’S IN THE BOX?
1* Argus P1s device (800mAh built-in)
1* Argus Pod Cartridge 0.7ohm 2ml
1* Argus Pod Cartridge 1.2ohm 2ml
1* Argus Pod Platform Card
1* Type-C Charging Cable
1* Lanyard
SPECIFICATIONS:
FEATURES:
1. Doubled coil lifespan
2. 20 minutes charging
3. Cyberpunk lights interaction
4. iCOSM code brings optimal vaping
5. The stick-shaped version of Argus P1
6. 2A fast charging
7. Transparent window to view the inner circuit structure
8. 23-day pod lifespan
9. 800mAh battery, leakproof design
10. Solid magnetic connection
11. Safety protections: 5s Overtime/Short-Circuit/Overcharge/Output Over-Current/Low Battery/Over Heated Protection
INITIAL THOUGHTS:
The packaging for the P1s is stylish yet simple. The front of the box has the Voopoo and Argus P1s names on the front along with a color picture of the device. There is also the large nicotine warning statement that has become all too familiar on devices targeted for the U.S. market.The back side of the box has a contents list and the company information. The box opens from one end and the device is sitting in a plastic tray with the extra pod, lanyard, user manual, a USB-C charging cable, and a card that shows the different Argus devices and pods that are compatible. I was told that the card would not be included in the samples but it appears that it was included unless Voopoo was talking about something else.
The P1s is equipped with the new ICOSM Flavor Interpretation Code that was announced on September 28th. I am not one to copy and paste but felt like the explanation of this was best described by Voopoo instead of me so here is what Voopoo has to say about ICOSM and some promotional images that are available on the website.
“
Unique Structure, Clean Experience
To improve the vaping taste experience comprehensively, iCOSM CODE adapts the unique capsule structure over the base of the cartridge, isolates the condensate and prevents e-liquid leakage.
Silver Ion Material, Original Freshness
iCOSM CODE keeps the original freshness through the silver ion coated on the cartridge that helps seal the e-liquid's freshness.
Multiple Air Inlets Structure, Smooth Airflow
iCOSM Flavor Interpretation Code integrates multiple air inlets at the bottom of the cartridge, which balance the air flowing and ensure sufficient airflow intake, bringing a smooth vaping experience.
Multiple Interpretations, Distinct Experience
iCOSM CODE allows for various interpretations of flavor, as coils with different resistances affect the taste of the e-liquid differently. By enabling both strong and mild flavors, and thick or thin vapor, users can create personalized flavors that cater to their preferences, making each vape session unique.”
The Argus pod cartridges are compatible with the Argus G, Argus Pod SE, Argus Z, Argus P1, Argus Pod, as well as the P1s. The standard pod has a liquid capacity of 3ml while the TPD version has a 2ml capacity. The pods are tinted but not so dark that you can’t easily see the liquid level. The pods included in the sample kit are .7 ohm and 1.2 ohm. Both pods are side fill type pods. I did experience a little bit of a mess when filling with a glass dropper bottle. They are more easily filled with a 10ml plastic bottle. The resistance of each pod is stamped into the rubber plug and there is an arrow pointing in the direction from which the plug should be lifted for filling.
The pod opening on the P1s has the usual two plated spring loaded contacts that supply power to the coil. There is a strong magnet on each end that align with the magnets on the bottom of the pods. Also in the picture below you can see the airflow sensor since the P1s is an auto draw only pod device. The magnets hold the pods in very securely with little to no chance of coming out accidentally. The magnets in the pods are not visible but are definitely there. I experienced a little trouble trying to take a picture with the two pods side by side because the magnets on the pods want to make each other turn if you get the pods too close. There are four holes on the bottom of the pods that allow plenty of airflow. Initially I found the airflow to be a bit too much for me.
WHAT’S IN THE BOX?
1* Argus P1s device (800mAh built-in)
1* Argus Pod Cartridge 0.7ohm 2ml
1* Argus Pod Cartridge 1.2ohm 2ml
1* Argus Pod Platform Card
1* Type-C Charging Cable
1* Lanyard
SPECIFICATIONS:
FEATURES:
1. Doubled coil lifespan
2. 20 minutes charging
3. Cyberpunk lights interaction
4. iCOSM code brings optimal vaping
5. The stick-shaped version of Argus P1
6. 2A fast charging
7. Transparent window to view the inner circuit structure
8. 23-day pod lifespan
9. 800mAh battery, leakproof design
10. Solid magnetic connection
11. Safety protections: 5s Overtime/Short-Circuit/Overcharge/Output Over-Current/Low Battery/Over Heated Protection
INITIAL THOUGHTS:
The packaging for the P1s is stylish yet simple. The front of the box has the Voopoo and Argus P1s names on the front along with a color picture of the device. There is also the large nicotine warning statement that has become all too familiar on devices targeted for the U.S. market.The back side of the box has a contents list and the company information. The box opens from one end and the device is sitting in a plastic tray with the extra pod, lanyard, user manual, a USB-C charging cable, and a card that shows the different Argus devices and pods that are compatible. I was told that the card would not be included in the samples but it appears that it was included unless Voopoo was talking about something else.
The P1s is equipped with the new ICOSM Flavor Interpretation Code that was announced on September 28th. I am not one to copy and paste but felt like the explanation of this was best described by Voopoo instead of me so here is what Voopoo has to say about ICOSM and some promotional images that are available on the website.
“
Unique Structure, Clean Experience
To improve the vaping taste experience comprehensively, iCOSM CODE adapts the unique capsule structure over the base of the cartridge, isolates the condensate and prevents e-liquid leakage.
Silver Ion Material, Original Freshness
iCOSM CODE keeps the original freshness through the silver ion coated on the cartridge that helps seal the e-liquid's freshness.
Multiple Air Inlets Structure, Smooth Airflow
iCOSM Flavor Interpretation Code integrates multiple air inlets at the bottom of the cartridge, which balance the air flowing and ensure sufficient airflow intake, bringing a smooth vaping experience.
Multiple Interpretations, Distinct Experience
iCOSM CODE allows for various interpretations of flavor, as coils with different resistances affect the taste of the e-liquid differently. By enabling both strong and mild flavors, and thick or thin vapor, users can create personalized flavors that cater to their preferences, making each vape session unique.”
The Argus pod cartridges are compatible with the Argus G, Argus Pod SE, Argus Z, Argus P1, Argus Pod, as well as the P1s. The standard pod has a liquid capacity of 3ml while the TPD version has a 2ml capacity. The pods are tinted but not so dark that you can’t easily see the liquid level. The pods included in the sample kit are .7 ohm and 1.2 ohm. Both pods are side fill type pods. I did experience a little bit of a mess when filling with a glass dropper bottle. They are more easily filled with a 10ml plastic bottle. The resistance of each pod is stamped into the rubber plug and there is an arrow pointing in the direction from which the plug should be lifted for filling.
The pod opening on the P1s has the usual two plated spring loaded contacts that supply power to the coil. There is a strong magnet on each end that align with the magnets on the bottom of the pods. Also in the picture below you can see the airflow sensor since the P1s is an auto draw only pod device. The magnets hold the pods in very securely with little to no chance of coming out accidentally. The magnets in the pods are not visible but are definitely there. I experienced a little trouble trying to take a picture with the two pods side by side because the magnets on the pods want to make each other turn if you get the pods too close. There are four holes on the bottom of the pods that allow plenty of airflow. Initially I found the airflow to be a bit too much for me.
