vaporesso GTX GO 80 E GTX GO 40 Kit
vaporesso offers an update on the entry level Vape Pen theme. GTX GO is available in two variants 80W with 3,000mAh battery and 40W with 1,500mAh battery. These devices are respectively equipped with GTX Pod tank 26 / 22mm with magnetic attachment and Top-Filling system, which makes the charging process simple and hassle-free. SSS Leak Resistant technology stops leaks.
GTX GO supports the entire GTX coil series, including a DIY RBA. Both devices have adjustable airflow and TYPE-C charging port.
Enjoy the reading
Packaging:
The package announces the color of the "Sample" contained.
The device and some main features are shown in the form of icons.
On the back are the specifications (depending on the GO 80/40 version), the packing list and the address of Shenzhen Smoore Technology Limited.
The image of the kit is shown on the side, the batch number and the color of the Sample are indicated above an adhesive label.
On the opposite side, a label contains the scratch off & scan, an anti-counterfeiting hologram and the inevitable logos and trademarks required by law.
GTX GO 80 Kit package includes:
1 x GTX GO 80W Battery
1 x GTX Pod 26mm (5ml / 2ml TPD)
1 x Mesh Coil: GTX 0.2Ω Range (45-60W)
1 x USB Type-C Cable
1 x User Manual
1 x Warranty Card
GTX GO 40 Kit Package Includes:
1 x GTX GO 40W Battery
1 x GTX Pod 22mm (3.5ml / 2ml TPD)
1 x Mesh Coil: GTX 0.6Ω Range (20-30W)
1 x USB Type C Cable
1 x User Manual
1 x Warranty Card
GTX GO 80 Kit technical data:
• Material: Anodized aluminum
• Dimensions: φ26 x 133.2mm
• Compatible with GTX Coil: RBA-0.15Ω-0.2Ω-0.3Ω-0.6Ω-0.8Ω-1.2Ω
• Pod capacity: 5ml-2ml (TPD)
• Output power: 5-80W
• Output voltage: 0-4V
• Resistance range: 0.1-2Ω
• Battery capacity: built-in 3000mAh
• Charging: 5V-2A, Type-C
GTX GO 40 Kit technical data:
• Material: Anodized aluminum
• Dimensions: φ22 x 110.3mm
• Compatible with GTX Coil: RBA-0.3Ω-0.6Ω-0.8Ω-1.2Ω
• Pod Capacity: 3.5ml-2ml (TPD)
• Output power: 5-40W
• Output voltage: 0-4V
• Resistance range: 0.1-2Ω
• Battery capacity: built-in 1500mAh
• Charging: 5V-1A, Type-C
GTX GO 80 / 40W available colors:
• Black, Matte Gray, Red, Blue, Rainbow.
Details:
For this test I received the Matte Gray color version for the GTX GO 80 and Rainbow for the GTX GO 40.
Both devices have the same design and the same color options. The anodized aluminum alloy makes them wear resistant and aesthetically pleasing.
The main differences between the two versions are; the size, battery capacity, output power, type and capacity of the pod and the different resistance range of the usable GTX coils.
Super-easy single button operation:
The square-shaped Fire button made of plastic material with a rough texture is slightly protruding and incorporates the notification LED, on the bottom of the mod we find the writing "Vaporesso" arranged vertically.
On the opposite side we find the 2A USB-C type charging port (1A for the GTX 40 GO), in the lower part there is the Vaporesso logo.
AFC:
The upper part of the Mod with the "chalice" profile houses the Pod. To power the Coil, two opposing slots have been made on the body / battery. To vary the air flow just rotate the Pod. The slots on the GTX GO 80 measure 12x2mm those of the GTX GO 40 measure 10x2mm.
GTX GO above and below:
The Pod compartment contains the two gold-plated electrical contact pins in the center, the metal ring for the magnetic attraction of the cartridge is not suspended as on 99% of pod / circular systems but is an integral part of the "floor" this fact favors for cleaning operation if needed.
On the bottom of GTX GO there is a small safety vent hole for the integrated battery, the battery characteristics, logos and legal marks are also shown on the bottom.
