Vapefly TIM
Today I bring you a POD type device from the Vapefly brand. A device in collaboration with Dampfalot TV. This device has a 1100mAh battery, interchangeable coils, 4mL capacity among many other features that we will discuss in more depth in the review.
Feel free to check the TIM Pod on Vapefly Site for more information, also a big thank you to Daisy from Vapefly, she has been very kind to me and providing me with these products.
Disclaimer; Nobody nor any brand is paying me to do this review, all you will see are my most sincere opinions, both the positive and the negative.
Feel free to check the TIM Pod on Vapefly Site for more information, also a big thank you to Daisy from Vapefly, she has been very kind to me and providing me with these products.
Disclaimer; Nobody nor any brand is paying me to do this review, all you will see are my most sincere opinions, both the positive and the negative.
Features |
Step-Up Circuit Board |
1100mAh Battery |
4mL Cartridge |
Side Refill |
2A Fast Charging |
30W Output Power |
Brand | Vapefly |
Product Name | Tim Pod Kit |
Size | 26*18*120mm |
Max Output Power | 30W |
Max Output Voltage | 6V |
Battery | Built-in 1100mAh |
Material | Aluminum alloy + PCTG |
Pod Capacity | 4mL |
Filling Type | Side Filling |
Charging | 2A Fast Charging |
Replace Coils | 0.6ohm mesh coil, KA1 (included) 0.8ohm mesh coil, KA1 (pre-installed) 1.0ohm mesh coil, KA1 (sold separately) 1.2ohm mesh coil, KA1 (sold separately) |
Color | Red & Black, Yellow & Black, Black, Gunmetal, Silver |
Packaging
The device is presented to us in a fairly elongated rectangular box that combines the black of the background with the gold of the letters as is usual in Vapefly. The packaging does not match the color of the device, it shows the special color of Dampfalot TV (a German reviewer who has designed this product together with Vapefly). Above we see the brand of the product and just below the TIM model, which is the acronym for Tasty And Intense Moments, the product's slogan.
On the side, certain contact directions with Vapefly are presented to us on a black background, in addition to some typical vaping warnings.
On the back it begins with a brief description of the product, commenting that it is a collaboration with Dampfalot TV. Just below we are shown some main features of the device. Also at the bottom we find a scratch to verify that the product is original and a barcode that also indicates the color of the product.
In the box
1*Tim POD Battery
1*Tim POD Cartridge
1*0.8Ω Coil
1*0.6Ω Coil
1* Type-C Cable
1*User Manual
Here, we are simply shown the color of the product in question and all those available, in this case Silver is marked.
If we slide the lid of the box the first thing we find is the device nested in a custom-made pad. Under it we have a hole to be able to remove the device more easily. I should note that it originally comes wrapped in a small bag for safety. The pad is somewhat difficult to remove to access that double bottom where the cable and replacement coil will be found, but it is minimal.
If we organize everything a little, we end up with something like this. The device on one hand, the Type-C cable on the other and the spare coil as well. In addition, one is already pre-installed in the cartridge.
Device Inspection
The device is stick-shaped with very rounded edges, which gives it a modern and aesthetic appearance. At the top we have the cartridge, which we will talk about in more depth later in the review. If we continue going down we have a window to observe the amount of liquid we have left, I recommend filling it when it is still above the cotton of the coil.
In the middle part we find an area shared by the button and the screen, which show quite important information in addition to having certain functions.
The product model, TIM, is shown at the bottom.
Here I show you the screen and its respective information.
On the left side we are shown the battery percentage, which will decrease when reaching 75%, 50%, 25% and 0%. In the center we are shown the wattage at which we vape and on the right the ''A'' indicates between ''Automatic'' mode or ''D'' if it is in ''DIY'' mode. At the bottom left we will see the Ω of the coil and on the right the voltage at which we vape, which will range from 0.00V to a maximum of 6.00V.
Regarding functions
5 Clicks - We will turn on the device
5 Clicks with the device on will show a menu in which we will be given the choice between DIY or AUTOMATIC mode and we will also be able to turn off the device.
2 Clicks - The battery percentage will be shown from 0% to 100%
3 Clicks - It will let us change the wattage in 0.5W increments up to a maximum of 30W, then it will reset to 5W and start the cycle again.
4 Clicks - They will lock the button and it can only be activated by auto-draw
4 Clicks with the button locked - They will unlock the button
Now differences between DIY and AUTOMATIC mode.
In DIY mode we will be able to change the wattage between 5W-30W regardless of the Ω of the coil
In AUTOMATIC mode we will simply be allowed to change the Wattage between the one recommended for the coil.
On the left side we are shown the battery percentage, which will decrease when reaching 75%, 50%, 25% and 0%. In the center we are shown the wattage at which we vape and on the right the ''A'' indicates between ''Automatic'' mode or ''D'' if it is in ''DIY'' mode. At the bottom left we will see the Ω of the coil and on the right the voltage at which we vape, which will range from 0.00V to a maximum of 6.00V.
Regarding functions
5 Clicks - We will turn on the device
5 Clicks with the device on will show a menu in which we will be given the choice between DIY or AUTOMATIC mode and we will also be able to turn off the device.
2 Clicks - The battery percentage will be shown from 0% to 100%
3 Clicks - It will let us change the wattage in 0.5W increments up to a maximum of 30W, then it will reset to 5W and start the cycle again.
4 Clicks - They will lock the button and it can only be activated by auto-draw
4 Clicks with the button locked - They will unlock the button
Now differences between DIY and AUTOMATIC mode.
In DIY mode we will be able to change the wattage between 5W-30W regardless of the Ω of the coil
In AUTOMATIC mode we will simply be allowed to change the Wattage between the one recommended for the coil.
Last edited: