The Vandy vape Pyro V2 BF RDTA was given to me by sourcemore for the purpose of this review.
I don’t know what rock I was living under, not trying RDTAs until recently, but I’m living my best life now. What’s the point of an RDTA? Well, the point is, it does it all! It’s a dripper, it’s a tank, it’s bottom feed! Box mod, squonk mod, mech mod, whatever you’re in the mood for today the Pyro V2 will pair with it nicely. No mod left behind!
In the box, you get
It’s 24mm wide, 36.8mm high, holds 4ml of liquid, and is dual or single coil. It comes in SS, gold, black (it’s a matte black), rainbow, and blue.
The airflow adjusts by turning the top of the cap. You can easily see the part that spins, but not the air holes. I don’t think I’ve ever seen anything quite like that, but I really like it. The cap and the sides of the deck have very noticeable cutouts, so it’s a piece of cake putting the cap on. Straight down, no guesswork. Inside the cap, there are two silicon nubs that plug the juice fill ports. Juice those before you put it together, and the cap will come off easily without pulling the nubs off – but you do get spares, just in case. And they do keep it from leaking. I mean I wouldn’t stand it on its head overnight, but if it falls over, you’re safe. And I don’t know, maybe it could stand on its head overnight. I haven’t tried, tbh.
I didn’t use the included coils, as I prefer ss316, and I made them 2.5mm ID, a tad smaller than the 2.8 of the NI80s. If you prefer a single coil, you have plenty of room. I also noted that the screws are beefy and easy to tighten.
The airflow is pretty wide when all the way open, very smooth, and it closes almost completely off.
I don’t know the science behind why some tanks are thirsty, and some are not, but for whatever reason, this one is not. Even with two coils, it’s not steaming through the juice, while I’m still getting a nice volume of vapor. I have my Pyro paired with my Pulse V2 and it’s like they were made for each other. The 11mls total liquid capacity (4mls for the Pyro, 7mls for the squonk bottle) and the 21700 battery easily last all day.
The flavor is right up there with the best drippers, it looks great with both the clear glass and PEI, everything about it is easy and good. I have not one bad thing to say about this atty, and it goes in my winner’s circle.
I do not have a code for this item yet – if I get one I’ll either edit or post below.
Thank you, Sourcemore, for the opportunity to test drive the Pyro V2!
I don’t know what rock I was living under, not trying RDTAs until recently, but I’m living my best life now. What’s the point of an RDTA? Well, the point is, it does it all! It’s a dripper, it’s a tank, it’s bottom feed! Box mod, squonk mod, mech mod, whatever you’re in the mood for today the Pyro V2 will pair with it nicely. No mod left behind!
In the box, you get
- The Vandy Vape Pyro V2 with BF pin, PEI glass and drip tip installed
- A spare drip tip, black
- coil lead tool
- A pair of Ni80 fused clapton coils
- Clear glass
- Accessories bag, with O rings, tools, blind pin, and spare silicon nubs
It’s 24mm wide, 36.8mm high, holds 4ml of liquid, and is dual or single coil. It comes in SS, gold, black (it’s a matte black), rainbow, and blue.
The airflow adjusts by turning the top of the cap. You can easily see the part that spins, but not the air holes. I don’t think I’ve ever seen anything quite like that, but I really like it. The cap and the sides of the deck have very noticeable cutouts, so it’s a piece of cake putting the cap on. Straight down, no guesswork. Inside the cap, there are two silicon nubs that plug the juice fill ports. Juice those before you put it together, and the cap will come off easily without pulling the nubs off – but you do get spares, just in case. And they do keep it from leaking. I mean I wouldn’t stand it on its head overnight, but if it falls over, you’re safe. And I don’t know, maybe it could stand on its head overnight. I haven’t tried, tbh.
I didn’t use the included coils, as I prefer ss316, and I made them 2.5mm ID, a tad smaller than the 2.8 of the NI80s. If you prefer a single coil, you have plenty of room. I also noted that the screws are beefy and easy to tighten.
The airflow is pretty wide when all the way open, very smooth, and it closes almost completely off.
I don’t know the science behind why some tanks are thirsty, and some are not, but for whatever reason, this one is not. Even with two coils, it’s not steaming through the juice, while I’m still getting a nice volume of vapor. I have my Pyro paired with my Pulse V2 and it’s like they were made for each other. The 11mls total liquid capacity (4mls for the Pyro, 7mls for the squonk bottle) and the 21700 battery easily last all day.
The flavor is right up there with the best drippers, it looks great with both the clear glass and PEI, everything about it is easy and good. I have not one bad thing to say about this atty, and it goes in my winner’s circle.
I do not have a code for this item yet – if I get one I’ll either edit or post below.
Thank you, Sourcemore, for the opportunity to test drive the Pyro V2!
