Urgent Joye ego T users please read need help ASAP

[coa097]

I just received my joye ego t along with 2 atty's the ego is working great but, my 2 replacement atty's dont seem to work there completely shot. I filled a brand new tank with juice and put it on the atty (correct way) inhale with out battery and you can hear airflow going through. Soon as I attached the battery turned it on i was getting no airflow nothing. Tried the other replacement atty that i purchased and same thing no air no vapor nothing. When I tried to inhale it was very tight lil to no airflow. I put on my other atty that came with the starter kit and it worked perfectly i dont know what is going on im very confused and upset I dont wanna be out of my money. Is it possible that the 2 replacement atty's that I purchased were dead upon arrival. I cleaned all my atty's the 2 atty's that came with the starter kit and my 2 replacement atty's in a combo of 50-70 proof alcohol for 25 mins and then let them sit in coffee temperature distilled water for another 25 mins. I let them sit over night and the 2 replacement atty's dont work at all.

Another problem I seem to be having is that my tanks when I inhale the lil bottom mouthpiece seems to be getting flooded, whats going on i'm very confused is it my ego or is it me I really would like to get the ego to work properly so I can give up cigs. What would be a good mix of juice 50/50 or what i dont know. Any help is greatly appriated please help me to get this to work. I think the 2 replacement atty's were dead upon arrival is it possible to just have gotten dead atty's. Please help.

 

[r77r7r]

Anything could be DOA. Charge your batts, put a wet atty on, if it gets hot and sizzles it's ok. Then you just need to learn to use a tank. Someone will be along to help with that.

If you find them too hard to use there are several alternatives- Carts, cartos, clearos, tanks.

 

[coa097]

Im not sure if it matters but i purchased my kit and replacement atty's from liberty-flights.com/

 

[r77r7r]

Liberty Flights is OK, sometimes things arrive broke, sometimes we break them inadvertantly.

 

[coa097]

I just tried what you told me to do it gets hot and sizzles but nothing thats as far as it goes. My son KageShinobi is trying to help me and even he's confused. It does get hot and sizzles with out juice and with juice but no airflow or anything. Please help

 

[coa097]

I dont think I broke it I just cleaned it as I saw on youtube and on the forums and its dead. Maybe there dead upon arrival like you said

 

[altoids]

first do you have a multi meter check the ohms or just screw on atty and listen for atty to start. I had issues with certain attys not firing to find out the center positive post wasnt touching. I had a ball of solder to put in there and it worked. second I had the ego fantistic unit to start with but heres my but every thing for it is expensive it flooded it tasted burnt leaked all over me now I guess the bigger tanks are better built with rubber stoppers on the bottom. My advice are you screwwing it on to tight cause the holes are on the side of the atty second are they firing up (atty) next is the battery charged up beyond that nothing to do but complain. Now on to juice everyone has there own ideas like shoes and clothes what works for one does not work for another. I buy all vg and put in throut hit to thin out some will buy other stuff. You need to check around to find what you like. Now the tanks you are using need something like a 80 vg 20 pg mix or 70vg / 30 pg or what I did. Now my experince sucked I cant stand all pg it has to be mostly vg and I am highly allergic to fake sugar oh joy. I will suggest the three places I buy from virginvapes.com, the vaporpro I buy hazelnut usa all vg throut hit mlb all vg ry4 all vg all 24 mgs, the vaporbomb peach 70 30 mix yummy lemon you get the point. have fun I have been smoke free since june 2011 and moved on to making my own mods now

 

[Iffy]

Have you checked to see if your atties center posts are making contact with the batt's center post? Very gently use a dental tool or jewelers screwdriver to lift the center posts just a smidgen. It doesn't take much at all if that's the problem.

As to your flooding issue, are you pulling like it's a cig? Gentle pulls are the most effective on PVs.

Good luck and keep us posted...

 

[altoids]

by the way dont soke overnight just use straight water thats what I did and I got attys still running since june. take apart carfully blow water through and shake dry burn on then off till coil turns red and no smoke comes out works like a charm. and clean maybe once every two weeks

 

[coa097]

Thanks I must've been hitting it like a cigg. My son showed me how and im getting more vapor, far as the atty's im just not sure.

 

[Cokeybill]

1)Look at the inside of your atty and try to line up the tanks with the holes in the atty. The flat part of your tank with the Atty holes on the plate.
2)Sometimes just a slight loosening of the Batt/Atty connection should allow air to pass more freely.
3) If you use the soft caps on the tank, they sometimes cause a lack of air streaming thru. Try hard caps.
Just a few points.