
Hi, today let's check out smok Morph-3 mod sent to me by @sourcemore online shop. In this Test I will examine each of the characteristics that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.
► SMOK Morph 3 Mods; Before starting, let's see together some special features indicated by the manufacturer:
• 1. Two external 18650/21700 batteries
• 2. Maximum power 230 W adjustable
• 3. VW and TC dual modes
• 4. Type-C charging port

► SMOK Morph 3 Mods; Packaging:
The packaging reports on the front; the image of the Mod, the writing of the model in question, the color of the device and a small icon that reminds us of the use of two 18650 batteries. On the back there are; the warnings, the manufacturer's address, logos & trademarks by law.

The other sides of the package read; content, holographic anti-counterfeiting logo, scratch codes for authenticity checking, barcode and key features in the form of icons

► SMOK Morph 3 Mods; Packing List:
• 1* SMOK Morph 3 Mod
• 1* Type-C cable
• 1* User Manual

► SMOK Morph 3 Mods; Specifications:
• Dimensions: 46 * 33.8 * 88mm
• Battery: Dual 18650 external battery (not included)
• Power range: 5W-230W(VW)/10W-230W(TC)
• Output Mode: VW/TC
• Input voltage: 6.4V-8.4V
• Standby current: <150uA
• Output voltage: 1.0V-8.2V
• Charging voltage: 5V ± 0.2V
• Charging current: maximum 2.0A
• Temperature range: 200°F-600°F/100°C-315°C
• Resistance Range: 0.1ohm-2.5ohm (VW)/0.05ohm-2.0ohm (TC)
• Screen: 0.96 inch TFT
• Reverse polarity protection
• Over discharge protection
• Battery reverse charge protection
• 8 second break
• Short circuit protection
• Low battery warning
• Intelligent recognition of the atomizer
• Overheating protection

► SMOK Morph 3 Mods; Available colours:
• Black
• Cyan
• White
• Blue
• Red
• Orange
• Carbon Fibre
• Black Gun Metal
• BlueHaze
• Purple Haze
• Prism Rainbow

► SMOK Morph 3 Mods; First Impressions:
The previous Morph-2 dual battery project dates back to the end of 2020; after almost three years the new Morph-3 version arrives. I honestly expected a noticeable change in style and shape, however this hasn't happened and I don't mind at all. So Morph-2 and Morph-3 could easily be confused with each other by the most inattentive. I remember loving Morph-2 from the very beginning and it is still in use within my office. Morph-2 and Morph-3 will continue to be my favorite rotation boxes. Morph-3 like Morph-2 maintains rather comfortable dimensions, it grips well and does not weigh too much, I like this too!

I received the "Black Gun Metal" color version for this test. The zinc alloy frame embraces the Mod protecting it from small bumps. The soft leather covers most of the surface and undoubtedly gives a comfortable touch, the excellent degree of finishes and the right leather/metal mix give this kit an elegant sporty look. On the back, the central crossbar in zinc alloy bears the vertical writing "Morph-3" which is mirror chromed.

On the sides of the Morph-3 there are a couple of handcrafted look seams and a small "Smok" heat branding. The fire button is housed on the side at the top, its shape is rectangular of excellent dimensions, the button is snappy and easy to click.


The front shows the 0.96" color display, the "+" and "-" adjustment keys and the USB-C charging socket, all housed within a large screen surrounded by the leather lining. Smok Morph- 3 is equipped with a new upgraded chipset which not only provides a very quick firing time of 0.001s.The chipset also provides two output modes (Power or TC) to support different styles of vaping.The 0.96" color screen is bright and easy to read, it shows all the useful information; selected mode, cell recharge level and percentage, Ohms, Volts, set power, lock/unlock symbol, total number of Puffs and duration of the last Puff.

► SMOK Morph 3 Mods; User Manual:
• Five clicks on the Fire button to turn on/off the device
• Press the Fire key and the "+" button simultaneously to change the theme (Blue, Orange, Red, Purple, White, Green)
• Press the Fire key and the "-" button simultaneously to clear the Puff number
• Press the "+" and "-" buttons simultaneously to lock/unlock the screen.
• Press the Fire key 3 times to enter the menu setting interface. Press the "+" or "-" buttons to switch between "POWER", "TC-TI", "TC-NI" and "TC-SS".

► SMOK Morph 3 Mods; Protections and Alerts:
• Power Off: The battery voltage is lower than 2.9V±0.1V.
• Battery Low: The battery voltage is lower than 3.2V±0.1V.
• Ohms Too Low: The resistance is less than 0.100±5% in WW mode or 0.05Ω±5% in TC mode.
• Ohms Too High: The resistance is higher than 2.50±5% in VW mode or 2.0Ω±5% in TC mode.
• No Atomizer: The atomizer has not been detected.
• Atomizer Short: A short circuit has been detected.
• PCBA Too Hot: PCBA temperature is too high and protection starts.
• Time Over: The vape time exceeds 8 consecutive seconds.

The door to access the compartment / batteries is located in the lower part of the Mod, on the door in addition to logos & brands you can see the sliding opening / closing mechanism and the writing "Designed By Smok".

Smok Morph-3 uses two 18650 batteries for operation. The compartment / battery door has a good opening / closing system that appears stable and quite safe. The positive and negative symbols are engraved on the inside of the door/battery, the same symbols are present on the bottom inside the mod.


The upper part of the Mod Morph-3 houses a cup with a 510 connection, the cup is fixed to the frame by 3 torx screws, the gold plated pin is spring loaded. The central position of the cup allows you to house tanks up to 31mm in diameter without protrusions.


► SMOK Morph 3 Mods; Final conclusions:
Smok wisely largely maintains the captivating design that characterized the previous version, the structure practically maintains the same materials as Morph-2 which have not changed, this plays a decisive role in the sensation of compactness and robustness that this powerful Mod instills in those who use it handle. The Fire button is precise, easy to reach even instinctively. The 6-color display is quite large, clear and legible. Smok Morph-3 can elegantly accommodate several medium / large tanks. The chipset manages the battery charge level well during the vape. The real-time power will automatically adapt to the current battery charge with an adequate output to lengthen the duration and maintain a stable delivery. Usually the power is released with a lightning-fast delivery in a fairly wide range of Watts. The internal card is not very rich, but it also offers NI-TI-SS TC modes. The levels of protection are numerous and appropriate for the user's safety. I didn't find any flaws in this kit, maybe I could recommend Smok to implement the excellent chipset with some additional functions such as; the intelligent detection of the coil in VW, the Bypass or the stealth mode. However, I absolutely do not see this as a necessary upgrade given the excellent quality / price ratio of SMOK Morph-3 Mod.
• From @Sourcemore you can buy SMOK Morph 3 Mod at the affordable price of $29.89 by entering the code: SM3M
SMOK Morph 3 Box Mod 230W
SMOK Morph 3 Mod is powered by dual 18650 batteries, comes with VW & TC dual modes, has 230W max power, features type-c charging port.
• Thank you for reading.
