Sigelei Fuchai Duo 3

Status
Not open for further replies.

Smokey James

Unresolved Status
Jan 19, 2019
60
128
I've got a problem with my Fuchai Duo 3 two battery mod. I run out of battery on my Hugo, so I put my Alpine Gold RDTA tank on the Fuchai. But when I pressed the fire button and took a hit it kept firing. The mod showed no sign it was still firing the tank. But if I hadn't unscrewed it, it'd still been firing. Plus I'd be rebuilding it right now instead of asking for help! My question is this: for a Fuchai mod, are they unable to be used with an RDTA tank? It works with any sub-ohm I've got, and I haven't tried my Dead Rabbit RTA on it yet. Hope someone can help me out, I haven't had any problems except a crappy battery door. Anyone know what would cause an auto fire situation only for the RDTA and not the others?

Sent from my Moto E (4) using Tapatalk
 
  • Optimistic
Reactions: stols001

bombastinator

ECF Guru
ECF Veteran
Verified Member
Sep 12, 2010
13,232
26,428
MN USA
i doubt it has anything to do with it being an RDTA. Maybe something that is different about that 510 connector bs others you have? Honestly a device shouldn’t fire till you hit the button no matter what atty you have on it. I would suspect your mod over the atty.
 

bombastinator

ECF Guru
ECF Veteran
Verified Member
Sep 12, 2010
13,232
26,428
MN USA
It only happens with my rdta. No other tank causes the problem. The Fuchai is the only mod I have that doesn't like the rdta.

Sent from my Moto E (4) using Tapatalk
Doesn’t matter. There could be some reason like, say, it’s the atty with the longest 510 you’ve got and it only happens when the mods 510 has enough pressure on it or something. Mod still has an issue it shouldn’t.
 
  • Like
Reactions: DeloresRose

vapdivrr

Vaping Master
ECF Veteran
Verified Member
Jul 8, 2012
9,966
19,932
61
sarasota,fl
It only happens with my rdta. No other tank causes the problem. The Fuchai is the only mod I have that doesn't like the rdta.

Sent from my Moto E (4) using Tapatalk
Although it didn't auto fire, I did have a particular mod and tank combo that wasnt good. It seemed that this particular tank had too long of a 510 pin that pushed the mods pin in too far, causing bursts of excessive power and burning my cotton. I just didnt use that combo and all was fine...weird though

Sent from my SM-G960U using Tapatalk
 

Baditude

ECF Guru
ECF Veteran
Apr 8, 2012
30,394
73,076
71
Ridgeway, Ohio
Just curious. Does the atomizer that has issues with your Fuschai have an extended center pin?

510-connection-pin-550x329.jpg
 
Status
Not open for further replies.

Users who are viewing this thread