RBA for Big Baby Beast Questions

Status
Not open for further replies.

Islandswamp

Full Member
May 17, 2017
34
16
43
If there is a better place for this thread please let me know so I can move it. I figured that this was too much of a noob question for the rebuildable forum.

I go through a lot of coils. I had been looking at getting into coil building to circumvent that issue. A few months ago I picked up a pair of devices that came with the Big Baby Beast because I had read that it had a rebuildable atomizer you could get for it. I figured that this was a good way to go.

Last week I placed an order on ebay for the coilmaster kit, some cotton bacon, and the RBA head for my big baby beast. I figured I'd keep one tank set up for RBA and the other for drop ins.

Yesterday the last part of the order arrived at my house and I quickly realized two things.

1: The spare piece of glass that came with one of my mods was NOT the larger piece needed to convert the BBB to RBA mode.

2: After inspecting my RBA I realized that it is a counterfeit device. There's no scratch off whatsoever. The device also seems really chintzy too, but as it is my first RBA (I've never even seen one IRL before this) I don't have anything to compare it to. Googling pictures of the RBA seems to indicate that they don't look quite the same either.

I contacted the seller and their offer is to refund half of my money and let me keep the unit. That doesn't seem like a good idea to me. I am worried that the device could be dangerous. What if they used substandard metals in the device? I have NO idea what I'm getting into. Plus in order for me to make this work I'll have to find and pay for an extra glass piece to adapt the coil. I'm just frustrated and I don't know what I should do.

Part of me wants to just wait until I get paid again and buy a different RBA. The Cloud Beast and Cloud Beast King both come with rebuildable decks. I've seen some other sub ohm style tanks with the RBA included as well. The real reason I want to upgrade the TFV8 BBB is that I just barely got them and I don't want to stop using them already.
 

Islandswamp

Full Member
May 17, 2017
34
16
43
I bought a Big Baby Beast and it came with the RBA coil... I am assuming that since you bought it with a kit that they didn't give you one?

That's the problem. Also I found a piece of replacement glass online, but that's another eleven dollars (with shipping) and the RBA might still not work when I get it. I'm really torn. Part of me wants to just buy a cloud beast and use that, but then I'm basically retiring my BBB's after two months of use. This wouldn't be a problem except I'm not made of money.
 

Imfallen_Angel

Ultra Member
ECF Veteran
Apr 10, 2016
1,711
2,763
Ottawa area, Canada

MrStik

Ultra Member
ECF Veteran
Mar 6, 2013
1,003
1,638
SoCal
That's the problem. Also I found a piece of replacement glass online, but that's another eleven dollars (with shipping) and the RBA might still not work when I get it. I'm really torn. Part of me wants to just buy a cloud beast and use that, but then I'm basically retiring my BBB's after two months of use. This wouldn't be a problem except I'm not made of money.

This is why I prefer not to buy online or anything. I buy everything from brick and mortar stores that I trust. Well good luck with everything and I hope you find the setup that you need and like.
 

the dog

Super Member
ECF Veteran
Jan 2, 2016
318
481
51
If there is a better place for this thread please let me know so I can move it. I figured that this was too much of a noob question for the rebuildable forum.

I go through a lot of coils. I had been looking at getting into coil building to circumvent that issue. A few months ago I picked up a pair of devices that came with the Big Baby Beast because I had read that it had a rebuildable atomizer you could get for it. I figured that this was a good way to go.

Last week I placed an order on ebay for the coilmaster kit, some cotton bacon, and the RBA head for my big baby beast. I figured I'd keep one tank set up for RBA and the other for drop ins.

Yesterday the last part of the order arrived at my house and I quickly realized two things.

1: The spare piece of glass that came with one of my mods was NOT the larger piece needed to convert the BBB to RBA mode.

2: After inspecting my RBA I realized that it is a counterfeit device. There's no scratch off whatsoever. The device also seems really chintzy too, but as it is my first RBA (I've never even seen one IRL before this) I don't have anything to compare it to. Googling pictures of the RBA seems to indicate that they don't look quite the same either.

I contacted the seller and their offer is to refund half of my money and let me keep the unit. That doesn't seem like a good idea to me. I am worried that the device could be dangerous. What if they used substandard metals in the device? I have NO idea what I'm getting into. Plus in order for me to make this work I'll have to find and pay for an extra glass piece to adapt the coil. I'm just frustrated and I don't know what I should do.

Part of me wants to just wait until I get paid again and buy a different RBA. The Cloud Beast and Cloud Beast King both come with rebuildable decks. I've seen some other sub ohm style tanks with the RBA included as well. The real reason I want to upgrade the TFV8 BBB is that I just barely got them and I don't want to stop using them already.
I paid 12$ Canadian for the whole RNA set up for my babybeast all authentic canvape .com if it helps
 

Eskie

ECF Guru
ECF Veteran
Verified Member
May 6, 2016
16,087
77,744
NY
This?

$8.65 Authentic Smoktech SMOK TFV8 Baby Replacement RBA Coil Head at FastTech - Worldwide Free Shipping

And for the money, it's cheaper than a pack of factory coils, and once you start building, the wire and cotton needed per coil will be maybe 10-50 cents worth. You'll be saving 1000x over the price of factory coils throughout it's lifespan.

That's designed for the baby beast, not the BBB. Well, not designed as the RBA is the same, but the glass is meant to fit the BB, not the BBB. If you by a BBB alone, it comes with both the correct glass and RBA. If you got the BBB as part of a kit, it doesn't. I have no idea why Smok does it this way as it is illogical, but there it is.
 
  • Like
Reactions: Letitia

Smoke_too_much

Ultra Member
ECF Veteran
Jul 8, 2016
1,213
1,393
71
Hi Islandswamp
I just looked at my BB RBA's, still in their original packaging and they should have a scratch off label on the end of the cardboard packaging sleeve.

I wouldn't waste $11 on a replacement glass (which themselves are often counterfeit and don't fit right) when for the same amount you can order the authentic RBA. So take the guys' offer and write off the other half as a learning experience concerning Ebay.

I agree with you're wanting to kick the dependence on store bought coils for your Beasts but someday, if you like building, you should invest in a better atty. The Beasts are not the best flavor performance available.
 
  • Like
Reactions: Tonee N
That's the problem. Also I found a piece of replacement glass online, but that's another eleven dollars (with shipping) and the RBA might still not work when I get it. I'm really torn. Part of me wants to just buy a cloud beast and use that, but then I'm basically retiring my BBB's after two months of use. This wouldn't be a problem except I'm not made of money.

In your online search, you need to look for:
TFV8 Exclusive Turbo RBA for the V8 Cloud Beast. -

SMOK TFV8 Coils (V8-T8 / V8-T6 / V8-Q4 / V8 RBA)

You will still need the extended glass tube as the RBA is bigger than stock coil heads.
Buy Replacement Glass Tube For SMOK TFV8 big baby RBA beast Tank
(I know they misspelled Bonus- which you don't need to select anyway, but it is the only known version to fit the BBB RBA.)

STILL- Both purchases above are worth it if you don't want to rebuild and not buy disposable coils.
 
FastTech also sells the glass piece you need 2 for $2.00, shipping is very slow for me since I live on the east cost. I bought 2 of them and they were the right side. I also bought a RBA deck for the Big Baby Beast but they sent a RBA deck for the Cloud Beast King.

With Fasttech, shipping is SLOW for everyone in the U.S. Fasttech is based out of China.

upload_2017-7-25_16-18-39.png
 

Mike McVape

Super Member
ECF Veteran
Verified Member
In your online search, you need to look for:
TFV8 Exclusive Turbo RBA for the V8 Cloud Beast. -

SMOK TFV8 Coils (V8-T8 / V8-T6 / V8-Q4 / V8 RBA)

You will still need the extended glass tube as the RBA is bigger than stock coil heads.
Buy Replacement Glass Tube For SMOK TFV8 big baby RBA beast Tank
(I know they misspelled Bonus- which you don't need to select anyway, but it is the only known version to fit the BBB RBA.)

STILL- Both purchases above are worth it if you don't want to rebuild and not buy disposable coils.
FYI both those coil links are incorrect, NOT for Big Baby Cloud Beast but the straight Cloud Beast.
 
Did you not read o_O:
Replacement Glass Tube For SMOK TFV8 big baby RBA Tank (5PCS)
Buy Replacement Glass Tube For SMOK TFV8 big baby RBA beast Tank -$8.95+shipping

Baby Beast RBA- For use with Smok TFV8 Big Baby Beast-
Baby Beast RBA Head by SMOK -$9.95+shipping

Yes, I was wrong with the link I provided for the RBA.
Per https://www.smoktech.com/support: You simply use the RBA for the Baby Beast, but you still have to buy the extra glass because even though they allow for the Baby Beast RBA (LBB) to work on the BBB, they didn't think it necessary to provide a glass for the BBB when it is using the RBA from the LBB.

However, I've found a more cost-effective route:
If you want a one-stop shopping (one shipping fee)- you can shop for what you need directly at these links and though you're not getting 5 glass tubes, it's a lot cheaper to go this route, especially when you consider you probably don't need that many glass tubes and you're only paying (1) One shipping fee:

KidneyPuncher: -A U.S. Company!

Big Baby Beast Glass Tube: TFV8 Big Baby RBA Replacement Glass -$3.95 :banana:
Baby Beast RBA: Smok TFV8 Baby RBA Head -$11.95 :banana:


Kidney Puncher has retail locations in Mesa and Tempe, Arizona. You can call them @ 1-866-705-5000 with any questions or e-mail them @ sales@kidneypuncher.com

Hope this helps!!
Happy Vaping!! :vapor:
Mel
 

Mike McVape

Super Member
ECF Veteran
Verified Member
So I wanna get this:
SMOK Priv V8 with TFV8 Baby Full Kit - 3.0ml- Is this the Baby-baby or the Big Baby? If it's the Baby-baby my current RBA set up should work and I won't need to order yet another glass will I?
3ml is Baby Beast. Big Baby Beast is 5ml. Factory coil versus RBA both take a different respective glass for RBA.
 
Status
Not open for further replies.

Users who are viewing this thread